Strut Channel
Aluminum channel is about half the weight of steel and resists corrosion in wet environments.
6'8" length channel is for use with beams spaced 6 ft. apart. The length allows 4" on each end to attach the channel to the beam.
For technical drawings and 3-D models, click on a part number.
Low-Profile Strut Channel
Half the height and the same width as regular strut channel, this low-profile strut channel fits into tight spots and is compatible with many of the same brackets.
Aluminum channel is about half the weight of steel and resists corrosion in wet environments.
6'8" length channel is for use with beams spaced 6 ft. apart. The length allows 4" on each end to attach the channel to the beam.
For technical drawings and 3-D models, click on a part number.
High-Profile Strut Channel
Up to two times the height of regular strut channel, this high-profile channel is stronger than regular strut channel.
Aluminum channel is about half the weight of steel and resists corrosion in wet environments.
For technical drawings and 3-D models, click on a part number.
Extra Low-Profile Strut Channel
Run cable and tubing in the tightest spaces with channel that is one-quarter the height and one-half the width of regular strut channel.
Aluminum channel is about half the weight of steel and resists corrosion in wet environments.
For technical drawings and 3-D models, click on a part number.
Strut Channel Nuts with Springs
A spring plus serrated grooves that grip the lip of the channel provide a more secure hold than standard strut channel nuts.
Aluminum nuts are about half the weight of steel and resist corrosion in wet environments.
For technical drawings and 3-D models, click on a part number.
Strut Channel Nuts
Serrated grooves securely grip the lip of the channel.
Aluminum nuts are about half the weight of steel and resist corrosion in wet environments.
For technical drawings and 3-D models, click on a part number.
Thread Size | For Strut Channel Ht. | For Strut Channel Wd. | Ht. | Pkg. Qty. | Pkg. | |
Aluminum | ||||||
|---|---|---|---|---|---|---|
| 1/4"-20 | 13/16", 1 5/8", 2 7/16", 3 1/4" | 1 5/8" | 1/4" | 1 | 00000000 | 00000 |
| 5/16"-18 | 13/16", 1 5/8", 2 7/16", 3 1/4" | 1 5/8" | 3/8" | 1 | 00000000 | 0000 |
| 3/8"-16 | 13/16", 1 5/8", 2 7/16", 3 1/4" | 1 5/8" | 3/8" | 1 | 00000000 | 0000 |
| 1/2"-13 | 13/16", 1 5/8", 2 7/16", 3 1/4" | 1 5/8" | 3/8" | 1 | 00000000 | 0000 |
Strut Channel Nuts with Hollow Studs
Run wires through the hollow stud of these nuts or use them as vents. Serrated grooves on the base securely grip channel lips.
For technical drawings and 3-D models, click on a part number.
Thread | ||||||
|---|---|---|---|---|---|---|
| Size | Lg. | Stud ID | For Strut Channel Ht. | For Strut Channel Wd. | Each | |
Zinc-Plated Aluminum | ||||||
| 1/2 NPT | 1 1/8" | 23/32" | 13/16", 1 5/8", 2 7/16", 3 1/4" | 1 5/8" | 0000000 | 000000 |
Strut Channel Washers
Use with hex nuts to connect threaded rod.
Aluminum washers are about half the weight of steel and resist corrosion in wet environments.
For technical drawings and 3-D models, click on a part number.
Corner Strut Channel Brackets
Aluminum brackets are about half the weight of steel and resist corrosion in wet environments.
For technical drawings and 3-D models, click on a part number.
Surface Strut Channel Brackets
Aluminum brackets are about half the weight of steel and resist corrosion in wet environments.
For technical drawings and 3-D models, click on a part number.
Lg. | |||||||
|---|---|---|---|---|---|---|---|
| Style | (A) | (B) | Thick. | Hole Dia. | Fasteners Included | Each | |
For 1 5/8" Channel Wd. | |||||||
Aluminum | |||||||
| 5 | 5 3/8" | 5 3/8" | 1/4" | 9/16" | No | 000000000 | 000000 |
Push-In Strut Channel Brackets
Push these brackets into strut channel and tighten the included cam screws for a partially concealed connection.
Aluminum brackets are about half the weight of steel and resist corrosion in wet environments.
For technical drawings and 3-D models, click on a part number.
Lg. | |||||||
|---|---|---|---|---|---|---|---|
| For Strut Channel Ht. | (A) | (B) | Thick. | Mounting Hole Center-to-Edge | Fasteners Included | Each | |
For 1 5/8" Channel Wd. | |||||||
Aluminum | |||||||
| 1 5/8" | 4 7/8" | 1 3/8" | 1/16" | 7/8" | Yes | 00000000 | 0000000 |
Lg. | |||||||
|---|---|---|---|---|---|---|---|
| For Strut Channel Ht. | (A) | (B) | Thick. | Mounting Hole Center-to-Edge | Fasteners Included | Each | |
For 1 5/8" Channel Wd. | |||||||
Aluminum | |||||||
| 1 5/8" | 3 1/4" | 1 3/8" | 1/16" | 7/8" | Yes | 00000000 | 000000 |
Lg. | |||||||
|---|---|---|---|---|---|---|---|
| For Strut Channel Ht. | (A) | (B) | Thick. | Mounting Hole Center-to-Edge | Fasteners Included | Each | |
For 1 5/8" Channel Wd. | |||||||
Aluminum | |||||||
| 1 5/8" | 4 7/8" | 1 3/8" | 1/16" | 7/8" | Yes | 00000000 | 000000 |
Strut Channel Panel-Mounting Brackets
Clamp panels onto strut channel to hold them in place. Originally designed for installing solar panels, these brackets are also used to build racks out of strut channel.
Use middle brackets between two panels.
Brackets with channel cover grip the top of the channel to provide added support for panels.
For technical drawings and 3-D models, click on a part number.
| Bracket Type | Features | For Strut Channel Wd. | For Max. No. of Panels | Lg. | Wd. | Ht. | Material | Fasteners Included | Mounting Fastener Thread Size | Each | |
For 1 1/16" to 2" Panel Thick. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| End | __ | 1 5/8" | 1 | 2" | 1 1/16" | 2 3/4" | Anodized Aluminum | Yes | 5/16"-18 | 0000000 | 000000 |
| End | Channel Cover | 1 5/8" | 1 | 2" | 1 7/8" | 2 3/4" | Anodized Aluminum | Yes | 5/16"-18 | 0000000 | 00000 |
| Middle | __ | 1 5/8" | 2 | 2" | 1 5/16" | 2 3/4" | Anodized Aluminum | Yes | 5/16"-18 | 0000000 | 00000 |
Strut Channel Covers
Create a four-sided raceway for cable, or give a more finished look to strut channel structures.
Aluminum covers are about half the weight of steel and resist corrosion in wet environments.
For technical drawings and 3-D models, click on a part number.