Made of nickel-plated brass, these fittings have better corrosion resistance than unplated brass fittings.

Aluminum fittings have good corrosion resistance, but are lighter in weight than brass.

You don't need a clamp to secure these fittings to tubing. They have a nut on the barbed end that tightens to holds the tubing in place.

Connect quick-clamp fittings in high-vacuum applications.

Also known as JIC (Joint Industrial Council) fittings, these provide a tight seal on tubing that is flared to 37°.

Low-profile barbs and a longer first barb allow for a smoother, easier installation than other barbed fittings. Slide the barbed end into hose and secure with a clamp.

The industry standard for quick-disconnect couplings, these are also known as industrial interchange couplings. Compatible with Industrial-shape plugs and sockets.

Compatible with Schrader-shape plugs and sockets.

Also known as dry disconnects and double shut-off couplings, these have a shut-off valve in the plug and socket for minimal fluid loss when disconnecting the hose line.

Use these couplings at pressures up to 6,500 psi. They consist of a plug and socket that connect and disconnect quickly. Use them if you need frequent access to a line. They are compatible with Snap-Tite H-Shape plugs and sockets.

Use these fittings with sand, steel shot, and other abrasive material. They have a unique claw-style head that connects to other abrasive-material hose fittings with a quarter twist.

Connect these swivels to the threaded end of your dispensing hose. They rotate before and after installation as needed to prevent hose from twisting, kinking, and wearing prematurely.

Connect these fittings to thick-wall plastic pipe—they have thicker, stronger walls than standard-wall fittings, so they can handle heavy duty industrial plumbing and water supply applications, such as water processing, waste water treatment, and irrigation. They can withstand pressures up to 900 psi.

These manifolds have two separate sections inside, so you can run two different substances through them without worrying about them intermixing. Also known as headers.

When you’re short on vertical space, these manifolds are a good fit—they have outlets on the side instead of on top, so they have a lower profile than rectangular manifolds. Use them to distribute air or fluid to five locations from a single supply source.

With outlets on the side instead of on top, these manifolds have a lower profile than rectangular manifolds and fit well in cramped spaces. Use them to distribute air or fluid to three locations from a single supply source.

Use these junction blocks to organize and separate multiple lines in your system. They have threaded holes that allow air or fluid to flow straight through the block.

Stronger than plastic and aluminum, this is the lightest weight framing we offer. It has good resistance to chemicals and salt water.

Thick construction makes this framing strong and sturdy.

Serrated grooves grip the lip of the channel.

No need for fasteners—friction holds this framing together. Use press-fit framing and fittings to assemble carts, enclosures, and partitions.