Take precise measurements with this protractor.

Use these protractors to measure angles and dimensions.

Small enough to fit in your pocket, this versatile tool measures angles and dimensions and has a center finder.

Also known as bevel protractors, set bevels and measure angles with the adjustable arm.

Mount on any flat surface.

These tools have front and back digital displays, as well as horizontal and vertical vials.

At 2 1/4" square and 1" wide, this angle indicator easily fits into your pocket.

The LCD on these digital angle indicators shows angle in degrees and percent of slope.

These angle indicators come with a calibration certificate that's traceable to NIST and includes the test measurements that confirm accuracy.

The electronic sensor and the display are connected by a 4‐ft. cable so you can measure angles from a distance. They can be mounted up to 150 feet apart by replacing the included cable with a longer cable length.

Temporarily mount these indicators to a metal surface. They have four quadrants that each read any angle from 0° to 90°.

A ball inside a level tube indicates the side-to-side tilt angle.

Ensure reliable, repeatable angles.

Lay out machine tables and work stations at precise right angles. This laser generates two red lines that form a 90° angle.

These squares meet Fed. Spec. GGG-S-656-E, which establishes uniform standards for square accuracy to ensure reliable, repeatable angles.

Attach to Starrett High-Accuracy Combination Square Blades with the included lockbolts.

Use these blades with Starrett High-Accuracy Combination Square Heads. They meet Fed. Spec. GGG-R-791H, which establishes uniform standards for accuracy, graduations, and size.

Use these squares in place of your try square, miter square, depth gauge, height gauge, center-point finder, and level.

Blades are for use with High-Accuracy Combination Square Heads.

Duplicate or transfer any angle.

A protractor and triangle in one, use these tools to quickly set any angle from 0° to 90°.

Mark and cut straight lines or 90° angles.

Center your work by mounting these into your drill chuck or collet and lining up the pointer with the mark on the shaft.

These levels have a plastic housing.