About Rod Ends
More
About Washers
More
Leveling Washers for I-Beams
Commonly called beveled washers, these are tapered to fit inside an I-beam's flange to provide a parallel bearing surface.
Black-oxide iron washers have a matte-black finish that prevents corrosion in dry environments.
Hot-dipped galvanized iron washers are corrosion resistant in wet environments.
Aluminum washers are lightweight and corrosion resistant in wet environments.
18-8 stainless steel washers have good chemical resistance and may be mildly magnetic.
For technical drawings and 3-D models, click on a part number.
Thick. | ||||||||
---|---|---|---|---|---|---|---|---|
For Screw Size | ID | Wd. | (A) | (B) | Hardness | Pkg. Qty. | Pkg. | |
Iron | ||||||||
1/4" | 0.312" | 0.688" | 0.219" | 0.078" | Rockwell B62 | 25 | 000000000 | 000000 |
5/16" | 0.375" | 1.000" | 0.312" | 0.141" | Rockwell B62 | 10 | 000000000 | 00000 |
3/8" | 0.438" | 1.250" | 0.344" | 0.156" | Rockwell B62 | 25 | 000000000 | 00000 |
1/2" | 0.562" | 1.250" | 0.344" | 0.156" | Rockwell B62 | 25 | 000000000 | 00000 |
5/8" | 0.688" | 1.500" | 0.406" | 0.156" | Rockwell B62 | 10 | 000000000 | 00000 |
3/4" | 0.812" | 1.500" | 0.469" | 0.219" | Rockwell B62 | 10 | 000000000 | 00000 |
7/8" | 0.938" | 2.000" | 0.562" | 0.219" | Rockwell B62 | 10 | 000000000 | 00000 |
1" | 1.062" | 2.000" | 0.562" | 0.219" | Rockwell B62 | 10 | 000000000 | 00000 |
1 1/8" | 1.250" | 2.250" | 0.625" | 0.281" | Rockwell B62 | 1 | 000000000 | 0000 |
1 1/4" | 1.375" | 2.250" | 0.719" | 0.312" | Rockwell B62 | 1 | 000000000 | 0000 |
1 1/2" | 1.625" | 3.000" | 0.810" | 0.310" | Rockwell C35 | 1 | 000000000 | 00000 |
Black-Oxide Iron | ||||||||
1/4" | 0.312" | 0.688" | 0.219" | 0.078" | Rockwell B62 | 10 | 000000000 | 0000 |
5/16" | 0.375" | 1.000" | 0.313" | 0.141" | Rockwell B62 | 10 | 000000000 | 00000 |
3/8" | 0.438" | 1.250" | 0.344" | 0.156" | Rockwell B62 | 10 | 000000000 | 00000 |
1/2" | 0.562" | 1.250" | 0.344" | 0.156" | Rockwell B62 | 10 | 000000000 | 00000 |
5/8" | 0.688" | 1.500" | 0.406" | 0.156" | Rockwell B62 | 5 | 000000000 | 00000 |
3/4" | 0.812" | 1.500" | 0.469" | 0.219" | Rockwell B62 | 5 | 000000000 | 00000 |
7/8" | 0.938" | 2.000" | 0.562" | 0.219" | Rockwell B62 | 1 | 000000000 | 0000 |
1" | 1.062" | 2.000" | 0.562" | 0.219" | Rockwell B62 | 1 | 000000000 | 0000 |
1 1/4" | 1.344" | 2.250" | 0.719" | 0.313" | Rockwell B62 | 1 | 000000000 | 0000 |
Hot-Dipped Galvanized Iron | ||||||||
1/4" | 0.312" | 0.688" | 0.219" | 0.078" | Rockwell B72 | 25 | 000000000 | 00000 |
5/16" | 0.375" | 1.000" | 0.313" | 0.141" | Rockwell B62 | 10 | 000000000 | 00000 |
3/8" | 0.438" | 1.250" | 0.344" | 0.156" | Rockwell B62 | 10 | 000000000 | 00000 |
1/2" | 0.562" | 1.250" | 0.344" | 0.156" | Rockwell B62 | 10 | 000000000 | 00000 |
5/8" | 0.688" | 1.500" | 0.406" | 0.156" | Rockwell B62 | 10 | 000000000 | 00000 |
3/4" | 0.812" | 1.500" | 0.469" | 0.219" | Rockwell B62 | 10 | 000000000 | 00000 |
7/8" | 0.938" | 2.000" | 0.562" | 0.219" | Rockwell B62 | 5 | 000000000 | 00000 |
1" | 1.062" | 2.000" | 0.562" | 0.219" | Rockwell B62 | 5 | 000000000 | 00000 |
1 1/8" | 1.188" | 2.250" | 0.625" | 0.281" | Rockwell B62 | 1 | 000000000 | 0000 |
1 1/4" | 1.344" | 2.250" | 0.719" | 0.313" | Rockwell B62 | 1 | 000000000 | 0000 |
Aluminum | ||||||||
1/4" | 0.312" | 0.688" | 0.219" | 0.078" | Not Rated | 5 | 000000000 | 0000 |
5/16" | 0.375" | 1.000" | 0.250" | 0.094" | Not Rated | 5 | 000000000 | 00000 |
3/8" | 0.438" | 1.250" | 0.344" | 0.156" | Not Rated | 5 | 000000000 | 00000 |
1/2" | 0.562" | 1.250" | 0.344" | 0.156" | Not Rated | 5 | 000000000 | 00000 |
5/8" | 0.688" | 1.500" | 0.406" | 0.156" | Not Rated | 5 | 000000000 | 00000 |
3/4" | 0.812" | 1.500" | 0.469" | 0.219" | Not Rated | 5 | 000000000 | 00000 |
Steel | ||||||||
1/2" | 0.546" | 1.750" | 0.445" | 0.180" | Rockwell C38 | 5 | 000000000 | 00000 |
5/8" | 0.702" | 1.750" | 0.445" | 0.180" | Rockwell C38 | 5 | 000000000 | 00000 |
3/4" | 0.827" | 1.750" | 0.445" | 0.180" | Rockwell C38 | 5 | 000000000 | 00000 |
7/8" | 0.952" | 1.750" | 0.445" | 0.180" | Rockwell C38 | 5 | 000000000 | 00000 |
1" | 1.140" | 1.750" | 0.445" | 0.180" | Rockwell C38 | 5 | 000000000 | 00000 |
18-8 Stainless Steel | ||||||||
1/4" | 0.312" | 0.875" | 0.250" | 0.125" | Rockwell B45 | 5 | 000000000 | 00000 |
5/16" | 0.375" | 0.875" | 0.250" | 0.125" | Rockwell B45 | 5 | 000000000 | 00000 |
3/8" | 0.438" | 1.250" | 0.312" | 0.125" | Rockwell B45 | 1 | 000000000 | 0000 |
1/2" | 0.562" | 1.250" | 0.344" | 0.156" | Rockwell B45 | 1 | 000000000 | 0000 |
5/8" | 0.688" | 1.500" | 0.375" | 0.125" | Rockwell B45 | 1 | 000000000 | 00000 |
3/4" | 0.812" | 1.500" | 0.469" | 0.219" | Rockwell B45 | 1 | 000000000 | 00000 |
Metric Leveling Washers for I-Beams
Commonly called beveled washers, these metric washers are tapered to fit inside an I-beam's flange to provide a parallel bearing surface.
Zinc-plated steel washers are coated for corrosion resistance in wet environments.
Hot-dipped galvanized steel washers are ten times more corrosion resistant than zinc-plated washers.
18-8 stainless steel washers are the most corrosion-resistant option.
For technical drawings and 3-D models, click on a part number.
Thick., mm | |||||||||
---|---|---|---|---|---|---|---|---|---|
For Screw Size | ID, mm | Wd., mm | (A) | (B) | Hardness | Specifications Met | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | |||||||||
M8 | 9.0 | 22.0 | 4.6 | 1.5 | Rockwell B52 | DIN 435 | 10 | 000000000 | 000000 |
M10 | 11.0 | 22.0 | 4.6 | 1.5 | Rockwell B52 | DIN 435 | 10 | 000000000 | 00000 |
M12 | 14.0 | 26.0 | 6.2 | 2.0 | Rockwell B52 | DIN 435 | 10 | 000000000 | 00000 |
M16 | 18.0 | 32.0 | 7.5 | 2.5 | Rockwell B52 | DIN 435 | 10 | 000000000 | 00000 |
M20 | 22.0 | 40.0 | 9.2 | 3.0 | Rockwell B52 | DIN 435 | 5 | 000000000 | 00000 |
M24 | 26.0 | 56.0 | 10.8 | 3.0 | Rockwell B52 | DIN 435 | 1 | 000000000 | 00000 |
Hot-Dipped Galvanized Steel | |||||||||
M8 | 9.0 | 22.0 | 4.6 | 1.5 | Rockwell B52 | DIN 435 | 10 | 000000000 | 00000 |
M10 | 11.0 | 22.0 | 4.6 | 1.5 | Rockwell B52 | DIN 435 | 5 | 000000000 | 0000 |
M12 | 14.0 | 26.0 | 6.2 | 2.0 | Rockwell B52 | DIN 435 | 5 | 000000000 | 0000 |
M16 | 18.0 | 32.0 | 7.5 | 2.5 | Rockwell B52 | DIN 435 | 5 | 000000000 | 00000 |
M20 | 22.0 | 40.0 | 9.2 | 3.0 | Rockwell B52 | DIN 435 | 1 | 000000000 | 0000 |
M24 | 26.0 | 56.0 | 10.8 | 3.0 | Rockwell B52 | DIN 435 | 1 | 000000000 | 0000 |
18-8 Stainless Steel | |||||||||
M8 | 9.0 | 22.0 | 4.6 | 1.5 | Rockwell B52 | DIN 435 | 1 | 000000000 | 0000 |
M10 | 11.0 | 22.0 | 4.6 | 1.5 | Rockwell B52 | DIN 435 | 1 | 000000000 | 0000 |
M12 | 14.0 | 26.0 | 6.2 | 2.0 | Rockwell B52 | DIN 435 | 1 | 000000000 | 0000 |
M16 | 18.0 | 32.0 | 7.5 | 2.5 | Rockwell B52 | DIN 435 | 1 | 000000000 | 0000 |
M20 | 22.0 | 40.0 | 9.2 | 3.0 | Rockwell B52 | DIN 435 | 1 | 000000000 | 00000 |
M24 | 26.0 | 56.0 | 10.8 | 3.0 | Rockwell B52 | DIN 435 | 1 | 000000000 | 00000 |
Leveling Washers for U-Channels
Tapered to fit in a U-channel, these washers create a parallel bearing surface. They have a zinc-plated finish, so they resist corrosion in wet environments.
For technical drawings and 3-D models, click on a part number.
Thick., mm | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For Screw Size | ID, mm | Lg., mm | Wd., mm | (A) | (B) | Hardness | Specifications Met | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | ||||||||||
M8 | 9.0 | 22.0 | 22.0 | 3.8 | 2.0 | Rockwell B56 | DIN 434 | 10 | 000000000 | 000000 |
M10 | 11.0 | 22.0 | 22.0 | 3.8 | 2.0 | Rockwell B56 | DIN 434 | 10 | 000000000 | 00000 |
M12 | 14.0 | 30.0 | 26.0 | 4.9 | 2.5 | Rockwell B56 | DIN 434 | 5 | 000000000 | 0000 |
M16 | 18.0 | 36.0 | 32.0 | 5.9 | 3.0 | Rockwell B56 | DIN 434 | 5 | 000000000 | 00000 |
M20 | 22.0 | 44.0 | 40.0 | 7.0 | 3.5 | Rockwell B56 | DIN 434 | 1 | 000000000 | 0000 |
Unthreaded Spacers for Angles
The 45° end of these spacers fits against an angled surface to create a flat surface for connection. Made of 316 stainless steel for excellent corrosion resistance.
For technical drawings and 3-D models, click on a part number.
OD | Lg. | For Screw Size | ID | For Angle | Each | |
316 Stainless Steel | ||||||
---|---|---|---|---|---|---|
5/16" | 7/16" | No. 4 | 0.129" | 45° | 000000000 | 00000 |
25/64" | 1/2" | No. 6 | 0.169" | 45° | 000000000 | 00000 |
25/64" | 1/2" | No. 10 | 0.216" | 45° | 000000000 | 0000 |
33/64" | 5/8" | 1/4" | 0.287" | 45° | 000000000 | 00000 |
45/64" | 13/16" | 5/16" | 0.334" | 45° | 000000000 | 00000 |
55/64" | 31/32" | 3/8" | 0.413" | 45° | 000000000 | 00000 |
15/16" | 1 5/64" | 1/2" | 0.571" | 45° | 000000000 | 00000 |
1 17/64" | 1 3/8" | 5/8" | 0.669" | 45° | 000000000 | 00000 |
1 17/64" | 1 3/8" | 3/4" | 0.826" | 45° | 000000000 | 00000 |
Tapered Shims
Ridges keep these shims from sliding apart when stacked. Use them to align cabinets, doors, and windows, or for other rough leveling.
Shims are made of plastic to resist moisture and prevent rot. Polypropylene shims are rigid. PVC shims are flexible.
For technical drawings and 3-D models, click on a part number.
Thick. | |||||||||
---|---|---|---|---|---|---|---|---|---|
(A) | (B) | Lg. | Wd. | Mounting Hole Dia. | Color | Temp. Range | Pkg. Qty. | Pkg. | |
PVC Plastic | |||||||||
1/32" | 1/4" | 2" | 1 1/4" | 1/8" | Clear | 175° F | 10 | 000000000 | 000000 |
1/32" | 1/4" | 2" | 1 1/4" | 1/8" | White | 175° F | 10 | 000000000 | 0000 |
1/32" | 15/32" | 3 1/2" | 1 3/16" | 1/8" | Clear | 175° F | 2 | 000000000 | 0000 |
Polypropylene Plastic | |||||||||
1/32" | 1/4" | 2" | 1 1/4" | 1/8" | Black | 440° F | 30 | 000000000 | 00000 |
1/32" | 1/4" | 2" | 1 1/4" | 1/8" | Clear | 440° F | 10 | 000000000 | 00000 |
1/32" | 15/32" | 3 1/2" | 1 3/16" | 1/8" | Clear | 440° F | 2 | 000000000 | 0000 |
Slotted Tapered Shims
The slot lets you install these rigid shims around screws. Shims are made of plastic to resist moisture and prevent rot. Use them to align cabinets, doors, and windows, or for other rough leveling.
For technical drawings and 3-D models, click on a part number.
Breakaway Tapered Shims
Easily snap off any excess to get the length you need. Use these shims to align cabinets, doors, and windows, or for other rough leveling.
Dimpled shims have breaks every ½ inch. They resist splitting when nailed or screwed, so they’re best to use when hammering is needed.
Lined shims are marked every 1/8 inch for clean, precise breaks.
For technical drawings and 3-D models, click on a part number.
Thick. | |||||||||
---|---|---|---|---|---|---|---|---|---|
(A) | (B) | Lg. | Wd. | Score Interval | Color | Temp. Range | Pkg. Qty. | Pkg. | |
Dimpled Composite | |||||||||
1/16" | 1/4" | 7 1/2" | 1 1/2" | 1/2" | Beige | Not Rated | 12 | 000000 | 00000 |
Lined Composite | |||||||||
1/16" | 1/4" | 7 1/2" | 1 1/2" | 1/8" | Beige | Not Rated | 12 | 0000000 | 0000 |
Smooth Wood | |||||||||
1/16" | 3/16" | 3 1/2" | 1" | __ | __ | Not Rated | 50 | 000000 | 0000 |
1/16" | 1/4" | 6" | 1 3/8" | __ | __ | Not Rated | 9 | 000000 | 0000 |
1/16" | 1/4" | 8" | 1 3/8" | __ | __ | Not Rated | 12 | 0000000 | 0000 |
1/16" | 1/4" | 12" | 1 3/8" | __ | __ | Not Rated | 42 | 0000000 | 0000 |
Heavy Duty Tapered Shims
Ridges keep these aluminum shims from sliding apart when stacked. Designed for aligning shafts and axles, they support heavier loads than plastic tapered shims. For extra stability, screw through the center mounting hole. Also known as pinion shims.
For technical drawings and 3-D models, click on a part number.
Thickness | |||||||||
---|---|---|---|---|---|---|---|---|---|
Material | (A) | (B) | Lg. | Wd. | Mounting Hole Dia. | Min. Hardness | Magnetic Properties | Each | |
6063 Aluminum | 1/8" | 5/16" | 5" | 2" | 1/2" | Not Rated | Nonmagnetic | 000000000 | 000000 |
Ball Joint Rod End Reducers
Decrease the ID of your rod end to allow approximately 60° of misalignment. Reducers attach to your rod end to move your fastener away from the rod-end body.
For Rod End ID | ID | OD | Overall Ht. | Material | Pair | |
1/2" | 3/8" | 5/8" | 5/8" | 17-4 PH Stainless Steel | 000000 | 000000 |
5/8" | 1/2" | 13/16" | 7/8" | 17-4 PH Stainless Steel | 000000 | 00000 |
3/4" | 1/2" | 1" | 7/8" | 17-4 PH Stainless Steel | 000000 | 00000 |
3/4" | 5/8" | 1" | 7/8" | 17-4 PH Stainless Steel | 000000 | 00000 |
7/8" | 3/4" | 1 1/16" | 1 1/4" | 17-4 PH Stainless Steel | 000000 | 00000 |
1" | 3/4" | 1 1/8" | 1 3/8" | 17-4 PH Stainless Steel | 000000 | 00000 |