Material Material |
|---|
|
Finish Finish |
|---|
|
Length Length |
|---|
|
|
|
Link Type Link Type |
|---|
|
Working Load Working Load |
|---|
|
About Roller Chain and Sprockets
More
ANSI Roller Chain and Links
Connecting links are also known as master links. They're used to join the ends of a chain length. The side plate is easy to remove for attaching to a chain. Adding links are also known as roller links. They require two connecting links to join chain. Adding-and-connecting links are also known as half links and offset links. A combination of connecting and adding links, they join chain that requires an odd number of links. For trade size 35 and up, the side plate is easy to remove for attaching them to chain.
For technical drawings and 3-D models, click on a part number.
| Roller Chain Trade No. | Pitch | Roller Dia. | Roller Wd. | Working Load, lbs. | Lengths, ft. | Per Ft. | |
Steel | |||||||
|---|---|---|---|---|---|---|---|
| 40 | 1/2" | 0.312" | 5/16" | 350 | 1-20, 50, 100 | 00000000 | 00000 |
| Roller Chain Trade No. | Pitch | Roller Dia. | Roller Wd. | Working Load, lbs. | Each | |
Steel | ||||||
|---|---|---|---|---|---|---|
| 40 | 1/2" | 0.312" | 5/16" | 350 | 00000000 | 00000 |
| Roller Chain Trade No. | Pitch | Roller Dia. | Roller Wd. | Working Load, lbs. | Each | |
Steel | ||||||
|---|---|---|---|---|---|---|
| 40 | 1/2" | 0.312" | 5/16" | 350 | 00000000 | 00000 |
| Roller Chain Trade No. | Pitch | Roller Dia. | Roller Wd. | Working Load, lbs. | Each | |
Steel | ||||||
|---|---|---|---|---|---|---|
| 40 | 1/2" | 0.312" | 5/16" | 350 | 00000000 | 00000 |
High-Strength Corrosion-Resistant
ANSI Roller Chain and Links
Treated steel chain has over eight times the capacity of stainless steel chain.
Connecting links are also known as master links. They're used to join the ends of a chain length. The side plate is easy to remove for attaching to a chain. Adding links are also known as roller links. They require two connecting links to join chain. Adding-and-connecting links are also known as half links and offset links. A combination of connecting and adding links, they can join chain that requires an odd number of links. The side plate is easy to remove for attaching to chain.
For technical drawings and 3-D models, click on a part number.
| Roller Chain Trade No. | Pitch | Roller Dia. | Roller Wd. | Working Load, lbs. | Lengths, ft. | Per Ft. | |
Treated Steel | |||||||
|---|---|---|---|---|---|---|---|
| 40 | 1/2" | 0.312" | 5/16" | 940 | 1-20, 50, 100 | 000000 | 00000 |
| Roller Chain Trade No. | Pitch | Roller Dia. | Roller Wd. | Working Load, lbs. | Each | |
Treated Steel | ||||||
|---|---|---|---|---|---|---|
| 40 | 1/2" | 0.312" | 5/16" | 940 | 00000000 | 00000 |
| Roller Chain Trade No. | Pitch | Roller Dia. | Roller Wd. | Working Load, lbs. | Each | |
Treated Steel | ||||||
|---|---|---|---|---|---|---|
| 40 | 1/2" | 0.312" | 5/16" | 940 | 00000000 | 00000 |
| Roller Chain Trade No. | Pitch | Roller Dia. | Roller Wd. | Working Load, lbs. | Each | |
Treated Steel | ||||||
|---|---|---|---|---|---|---|
| 40 | 1/2" | 0.312" | 5/16" | 940 | 00000000 | 00000 |
Maintenance-Free ANSI Roller Chain and Links
With oil-embedded bushings and oil-coated pins, this chain is self-lubricating, which means it requires less maintenance than standard ANSI roller chain.
Connecting links are also known as master links. They're used to join the ends of a chain length. The side plate is easy to remove for attaching to a chain. Adding-and-connecting links are also known as half links and offset links. They can join chain that requires an odd number of links. The side plate is easy to remove for attaching to chain.
For technical drawings and 3-D models, click on a part number.
Extended-Life Maintenance-Free
ANSI Roller Chain and Links
A rubber ring seals grease between the bushings and pins and keeps out dust and other contaminants. Because it is self-lubricating, this chain requires less maintenance than standard ANSI roller chain.
Connecting links are also known as master links. They're used to join the ends of a chain length. The side plate is easy to remove for attaching to a chain. Adding-and-connecting links are also known as half links and offset links. They can join chain that requires an odd number of links. The side plate is easy to remove for attaching to chain.
For technical drawings and 3-D models, click on a part number.
Extended-Life Lightweight ANSI Roller Chain and Links
 Chain |  Connecting Link |
|
Plastic bushings as well as stainless steel pins and outer side plates give this chain a longer service life than other lightweight chain. Suitable for sound-sensitive and sanitary applications as well as wet conditions, it is also quiet-running and corrosion resistant.
Connecting links are also known as master links. They're used to join the ends of a chain length. The side plate is easy to remove for attaching to a chain.
For technical drawings and 3-D models, click on a part number.
Lightweight ANSI Roller Chain
This acetal chain is light, quiet, and corrosion resistant. Links snap together, so you don’t need connecting links.
For technical drawings and 3-D models, click on a part number.
Chain | |||||||
|---|---|---|---|---|---|---|---|
| Roller Chain Trade No. | Pitch | Roller Dia. | Roller Wd. | Working Load, lbs. | Lengths, ft. | Per Ft. | |
Single Strand | |||||||
Acetal Plastic | |||||||
| 40 | 1/2" | 0.312" | 5/16" | 55 | 1-20, 50 | 000000 | 000000 |
Chemical-Resistant Lightweight ANSI Roller Chain
Commonly used in chemical manufacturing, paper pulping, and waste processing, this chain is made of PVDF. It is also lightweight, quiet, and corrosion resistant. Links snap together, so you don’t need connecting links.
For technical drawings and 3-D models, click on a part number.
Chain | |||||||
|---|---|---|---|---|---|---|---|
| Roller Chain Trade No. | Pitch | Roller Dia. | Roller Wd. | Working Load, lbs. | Lengths, ft. | Per Ft. | |
Single Strand | |||||||
PVDF Plastic | |||||||
| 40 | 1/2" | 0.312" | 5/16" | 70 | 1-20, 50 | 000000 | 000000 |
Corrosion-Resistant Maintenance-Free
ANSI Roller Chain and Links
This self-lubricating nickel-plated steel chain has better corrosion resistance than steel chain and does not require regular maintenance. It has oil-embedded bushings and oil-coated pins.
Connecting links are also known as master links. They're used to join the ends of a chain length. The side plate is easy to remove for attaching to a chain. Adding-and-connecting links are also known as half links and offset links. They can join chain that requires an odd number of links. The side plate is easy to remove for attaching to chain.
For technical drawings and 3-D models, click on a part number.
Corrosion-Resistant Hollow-Pin
ANSI Roller Chain and Links
Made of stainless steel, this chain has excellent corrosion resistance. Hollow-pin-style bushings let you add attachments without disassembling the chain.
For technical drawings and 3-D models, click on a part number.
Chain | ||||||||
|---|---|---|---|---|---|---|---|---|
| Roller Chain Trade No. | Pitch | Roller Dia. | Roller Wd. | Pin Hole Dia. | Working Load, lbs. | Lengths, ft. | Per Ft. | |
Single Strand | ||||||||
304 Stainless Steel | ||||||||
| 40-SS | 1/2" | 0.312" | 5/16" | 0.157" | 95 | 1-20, 50, 100 | 000000 | 000000 |
Hollow-Pin ANSI Roller Chain and Links
This steel chain handles higher loads than stainless steel chain. Hollow-pin-style bushings let you add attachments without disassembling the chain.
Connecting links are also known as master links. They're used to join the ends of a chain length. The side plate is easy to remove for attaching to a chain. Adding-and-connecting links are also known as half links and offset links. They can join chain that requires an odd number of links. The side plate is easy to remove for attaching to chain.
For technical drawings and 3-D models, click on a part number.
Ultra-Flexible ANSI Roller Chain and Links
Also known as side bow chain, this chain has extra clearance between components for flexing from side to side on systems with curved tracks and sprockets that aren’t exactly aligned.
Connecting links are also known as master links. They're used to join the ends of a chain length. The side plate is easy to remove for attaching to a chain.
For technical drawings and 3-D models, click on a part number.