ANSI Lift Tables | McMaster-Carr

Filter by

Specifications Met

Weight Capacity

1,000 lb. to 1,999 lb.

2,000 lb. to 2,999 lb.

3,000 lb. to 3,999 lb.

Power Source

Length

Width

Height

Shape

Motor Input Voltage

Lift Mechanism

Mobility

Base Width

Material

Adjustment Mechanism

Base Length

Adjustment Type

Lift Style

Brake Type

Adjustment Direction

DFARS Specialty Metals

Exempt

Motor Location

External

Internal

Overall Weight Capacity

Less than 1,000 lb.

1,000 lb. to 1,999 lb.

2,000 lb. to 2,999 lb.

REACH

Compliant

Not Compliant

RoHS

Compliant

Compliant with Exemptions

Not Compliant

Export Control Classification Number (ECCN)

EAR99

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Elevation Speed

75 Products

Electric Stationary Lift Tables


Hand Adjustment Internal Motor	External Motor Hand Adjustment

Foot Adjust Internal Motor	Bellows

An electric motor and a hydraulic pump perform repetitive lifting and positioning with the push of a button. The NEMA rating only applies to the push-button control.

Warning: Never use to lift people.

Bellows—Bellows protect the working parts of the table from dust, dirt, and debris.

	Lift Tables																Bellows
							Motor		Electrical
	Wt. Cap., lb.	Lg.	Wd.	Ht.	Elevation Speed, in/sec	Duty Cycle	Electrical Phase	Full Load Current, amp	Connection	No. of Blades	Power Cord Lg., ft.	Control Cord Lg., ft.	Enclosure Rating	Specs. Met		Each		Each
Hand/Push-Button Adjustment with 115V AC Internal Motor







				Steel

				2,000	53"	31"	8 1/2" to 38 1/2"	2 1/2	25 Cycles per Hour	Single	20	Straight Blade	3	10	10	NEMA 1	ANSI MH29.1	8758T43	000000000	3740T83	000000000


				2,000	53"	40"	8 1/2" to 39 1/2"	2 1/2	25 Cycles per Hour	Single	20	Straight Blade	3	10	10	NEMA 1	ANSI MH29.1	8758T49	00000000	3740T83	00000000
				4,000	52"	39"	8 1/2" to 39 1/2"	1	25 Cycles per Hour	Single	20	Straight Blade	3	10	10	NEMA 1	ANSI MH29.1	2900T357	00000000	3740T84	00000000
				6,000	59"	40"	9 1/2" to 48"	3/4	15 Cycles per Hour	Single	20	Straight Blade	3	10	10	NEMA 1	ANSI MH29.1	2900T623	00000000	3740T385	00000000
				6,000	78"	40"	11" to 60"	3/4	15 Cycles per Hour	Single	20	Straight Blade	3	10	10	NEMA 1	ANSI MH29.1	2900T631	00000000	3740T375	00000000


				Hand/Push-Button Adjustment with 120V AC External Motor







								Steel

								550	32"	19 1/2"	6" to 28"	2 1/4	9 Cycles per Hour	Single	15	Straight Blade	3	8	10	NEMA 1	ANSI MH29.1	8758T34	00000000	3740T74	000000


								660	40"	20"	9 1/2" to 54"	3 1/4	9 Cycles per Hour	Single	15	Straight Blade	3	8	10	NEMA 1	ANSI MH29.1	8758T37	00000000	3740T75	00000000
								1,100	25 1/2"	18"	8 1/2" to 33 1/2"	1 3/4	9 Cycles per Hour	Single	15	Straight Blade	3	8	10	NEMA 1	ANSI MH29.1	8758T38	00000000	3740T78	000000
								1,100	40"	20"	6" to 31 1/2"	2	9 Cycles per Hour	Single	15	Straight Blade	3	8	10	NEMA 1	ANSI MH29.1	8758T35	00000000	3740T76	00000000
								1,650	40"	20"	6" to 31 1/2"	1 1/2	9 Cycles per Hour	Single	15	Straight Blade	3	8	10	NEMA 1	ANSI MH29.1	8758T36	00000000	3740T76	00000000


								Hand/Push-Button Adjustment with 480V AC Internal Motor







												Steel

												4,000	52"	39"	8 1/2" to 39 1/2"	1	25 Cycles per Hour	Three	4.8	Wire Leads	—	—	10	NEMA 1	ANSI MH29.1	2900T431	00000000	3740T84	00000000


												6,000	78"	40"	11" to 60"	3/4	15 Cycles per Hour	Three	4.8	Wire Leads	—	—	10	NEMA 1	ANSI MH29.1	2900T828	00000000	3740T375	00000000


												Foot/Push-Button Adjustment with 115V AC Internal Motor







																Steel

																4,000	52"	39"	8 1/2" to 39 1/2"	1	25 Cycles per Hour	Single	20	Straight Blade	3	10	10	NEMA 1	ANSI MH29.1	2900T29	00000000	3740T84	00000000


6,000	59"															40"	9 1/2" to 48"	3/4	15 Cycles per Hour	Single	20	Straight Blade	3	10	10	NEMA 1	ANSI MH29.1	2900T49	00000000	3740T385	00000000
6,000	78"															40"	11" to 60"	3/4	15 Cycles per Hour	Single	20	Straight Blade	3	10	10	NEMA 1	ANSI MH29.1	2900T63	00000000	3740T375	00000000


Foot/Push-Button Adjustment with 480V AC Internal Motor







																Steel

																4,000	52"	39"	8 1/2" to 39 1/2"	1	25 Cycles per Hour	Three	4.8	Wire Leads	—	—	10	NEMA 1	ANSI MH29.1	2900T405	00000000	3740T84	00000000


																6,000	78"	40"	11" to 60"	3/4	15 Cycles per Hour	Three	4.8	Wire Leads	—	—	10	NEMA 1	ANSI MH29.1	2900T645	00000000	3740T375	00000000

Foot-Operated Rolling Lift Tables

Use the foot lever and hydraulic pump on these tables to raise loads to your ideal height. They have either a hand valve or lever for controlled lowering. A floor lock or wheel brakes keep these tables in place as you load and unload.

Warning: Never use to lift people.

Scissor

									Wheel
	Wt. Cap., lb.	Lg.	Wd.	Ht.	Elevation per Stroke	Tabletop Ga.	Handle Ht.	Brake Type	Configuration	Material	Dia.	Specs. Met		Each
Steel



		600	32"	20"	10" to 33"	1"	7	35 1/2"	Floor Lock	Two Rigid Casters and Two Swivel Casters	Phenolic	5"	ANSI MH29.1	2791T22	000000000


		1,000	36"	24"	9 1/2" to 33"	5/8"	7	35 1/2"	Floor Lock	Two Rigid Casters and Two Swivel Casters	Phenolic	5"	ANSI MH29.1	2791T23	00000000
		1,000	48"	24"	9 1/2" to 45"	3/4"	7	35 1/2"	Floor Lock	Two Rigid Casters and Two Swivel Casters	Phenolic	5"	ANSI MH29.1	2791T25	00000000
		1,000	48"	36"	9 1/2" to 45"	3/4"	7	35 1/2"	Floor Lock	Two Rigid Casters and Two Swivel Casters	Phenolic	5"	ANSI MH29.1	2791T28	00000000
		1,500	48"	24"	9 1/2" to 45"	1/2"	7	35 1/2"	Floor Lock	Two Rigid Casters and Two Swivel Casters	Phenolic	5"	ANSI MH29.1	2791T26	00000000

Foot-Operated Stationary Lift Tables


	Bellows

Make repetitive lifting and positioning less of a chore. These tables have a foot lever and hydraulic pump to raise the load. A hand knob provides controlled lowering. All have a compact design, so they fit in confined spaces.

Warning: Never use to lift people.

Bellows—Bellows protect the working parts of the table from dust, dirt, and debris.

	Lift Tables									Bellows
	Wt. Cap., lb.	Lg.	Wd.	Ht.	Elevation per Stroke	Tabletop Ga.	Specs. Met		Each		Each
Steel



		440	25 1/2"	19 1/2"	5" to 21"	1/2"	13	ANSI MH29.1	8758T23	000000000	3740T73	0000000


		550	32"	19 1/2"	5" to 28"	1/2"	13	ANSI MH29.1	8758T24	00000000	3740T74	000000
		660	40"	20"	9 1/2" to 54"	3/4"	10	ANSI MH29.1	8758T27	00000000	3740T75	00000000
		1,100	40"	20"	6" to 31 1/2"	1/2"	10	ANSI MH29.1	8758T25	00000000	3740T76	00000000
		1,650	40"	20"	6" to 31 1/2"	3/8"	10	ANSI MH29.1	8758T26	00000000	3740T76	00000000

Air-Actuated Auto-Leveling Pallet Stands—Not for Lifting

These stands keep the top of your load at a convenient height; an air cylinder automatically returns the stand to your set height as you add or remove parts of your load. The turntable rotates 360° to reduce reaching. A maximum of 60 psi of air is needed for setup but not for operation. Adjust height before adding pallets. A three-position knob allows capacity adjustments while a relief valve prevents pressure build-up to provide overload protection. The stand must be loaded to at least the minimum capacity for auto-leveling to engage.

Warning: Not for lifting. Never use to support people.

								Air Inlet
Wt. Cap., lb.	Turntable Dia.	Lg.	Wd.	Ht.	Material	Frame Material	Actuator Material	Pipe Size	Thread Type	Gender	Forklift Entry	Features	Specs. Met		Each



	250 to 4,000	43"	49"	24 3/8"	10 1/2" to 30 1/2"	Steel	Steel	Rubber	1/4	NPT	Female	Yes	Relief Valve, Turntable	ANSI MH29.1	2883T7	000000000

Turntable-Top Electric Stationary Lift Tables

The turntable rotates to reduce reaching. Tables have an electric motor and a hydraulic pump that perform repetitive lifting and positioning with the push of a button. The NEMA rating only applies to the push-button control.

Warning: Never use to lift people.

Round


	Bellows

Bellows—Bellows protect the working parts of the table from dust, dirt, and debris.

	Lift Tables															Bellows
									Electrical
	Wt. Cap., lb.	Dia.	Ht.	Elevation Speed, in/sec	Tabletop Ga.	Turntable Dia.	Duty Cycle	Motor Full Load Current, amp	Connection	No. of Blades	Control Cord Lg., ft.	Enclosure Rating	Specs. Met		Each		Each
Steel







				With 115V AC Motor

				2,000	43"	11 1/2" to 41 1/2"	2 1/2	10	43"	25 Cycles per Hour	20	Straight Blade	3	10	NEMA 1	ANSI MH29.1	2901T33	000000000	3740T83	000000000


				4,000	43"	11 1/2" to 41 1/2"	1	10	43"	25 Cycles per Hour	20	Straight Blade	3	10	NEMA 1	ANSI MH29.1	2901T34	00000000	3740T84	00000000

Square


	Bellows

Bellows—Bellows protect the working parts of the table from dust, dirt, and debris.

	Lift Tables																Bellows
										Electrical
	Wt. Cap., lb.	Lg.	Wd.	Ht.	Elevation Speed, in/sec	Tabletop Ga.	Turntable Dia.	Duty Cycle	Motor Full Load Current, amp	Connection	No. of Blades	Control Cord Lg., ft.	Enclosure Rating	Specs. Met		Each		Each
Steel







				With 120V AC Motor

				3,500	48"	48"	8" to 44"	3/4	7	43"	20 Cycles per Hour	17	Straight Blade	3	10	NEMA 1	ANSI MH29.1	2901T15	0000000000	3740T56	000000000

Floor-Load Electric Stationary Lift Tables

The tabletop can go as low as 3", making loading and unloading from the floor and pallets easier. Tables have an electric motor and a hydraulic pump that perform repetitive lifting and positioning with the push of a button. The NEMA rating only applies to the push-button control. A toe guard at the base of the table provides safety for the operator.

Warning: Never use to lift people.

	Lift Tables																			Ramps
							Motor		Electrical
	Wt. Cap., lb.	Lg.	Wd.	Ht.	Elevation Speed, in/sec	Duty Cycle	Electrical Phase	Full Load Current, amp	Connection	No. of Blades	Tabletop Ga.	Power Cord Lg., ft.	Control Cord Lg., ft.	Specs. Met	Features	Enclosure Rating	Includes		Each		Each
Steel







				With 120V AC Motor

				550	40"	23 1/2"	3" to 29 1/2"	2 1/2	9 Cycles per Hour	Single	8.4	Straight Blade	3	10	8	10	ANSI MH29.1	Toe Guard	NEMA 4	6-ft. Long Hydraulic Hose	2295T42	000000000	2295T52	0000000


				1,100	40"	23 1/2"	3" to 30"	1 1/4	9 Cycles per Hour	Single	8.4	Straight Blade	3	10	8	10	ANSI MH29.1	Toe Guard	NEMA 4	6-ft. Long Hydraulic Hose	2295T43	00000000	2295T52	000000

Battery-Powered Rolling Lift Tables

Push the button and a hydraulic pump adjusts the load. Tables run on a motor that is powered by a sealed, maintenance-free battery and built-in charger. To keep from moving while you load or unload, these tables come with either a floor lock or wheel brakes.

Warning: Never use to lift people.

Scissor

	Lift Tables																Replacement Batteries		Replacement Pendant Switches		Replacement Solenoids
										Wheel
	Wt. Cap., lb.	Lg.	Wd.	Ht.	Elevation Speed, in/sec	Duty Cycle	Tabletop Ga.	Handle Ht.	Brake Type	Configuration	Material	No. of Brakes	Dia.	Enclosure Rating		Each		Each		Each		Each
Steel







				Batteries Included

				1,000	36"	24"	9 1/2" to 33"	2 1/4	15 Cycles per Hour	7	35 1/2"	Floor Lock	Two Rigid Casters and Two Swivel Casters	Phenolic	—	5"	NEMA 1	2791T41	000000000	2790T47	0000000	2790T49	0000000	2790T52	000000


				1,000	39 1/2"	20 1/2"	17 1/2" to 37 1/2"	4	12 Cycles per Hour	11	56 1/2"	Wheel Brake	Two Rigid Casters and Two Swivel Casters	Polyurethane Rubber	2	6"	—	2791T311	00000000	2791T314	000000	2791T315	000000	———	0
				1,000	39 1/2"	20 1/2"	19 1/2" to 63 1/2"	3 1/2	12 Cycles per Hour	11	46 1/2"	Wheel Brake	Two Rigid Casters and Two Swivel Casters	Polyurethane Rubber	2	6"	—	2791T312	00000000	2791T314	000000	2791T315	000000	———	0
				1,500	48"	24"	9 1/2" to 45"	1 3/4	15 Cycles per Hour	7	35 1/2"	Floor Lock	Two Rigid Casters and Two Swivel Casters	Phenolic	—	5"	NEMA 1	2791T44	00000000	2790T47	000000	2790T49	000000	2790T52	00000
				1,500	48"	36"	9 1/2" to 45"	1 3/4	15 Cycles per Hour	7	35 1/2"	Floor Lock	Two Rigid Casters and Two Swivel Casters	Phenolic	—	5"	NEMA 1	2791T46	00000000	2790T47	000000	2790T49	000000	2790T52	00000
				2,000	40"	20"	19" to 38"	2 3/4	12 Cycles per Hour	11	46 1/2"	Wheel Brake	Two Rigid Casters and Two Swivel Casters	Polyurethane Rubber	2	6"	—	2791T313	00000000	2791T314	000000	2791T315	000000	———	0

Battery-Operated Lift Trucks with Platform

Platforms support material directly without an additional pallet. A hydraulic pump powered by a rechargeable battery raises and lowers loads with the push of a button. The push-button control has a self-retracting cord. Two swivel casters at the rear of the lift truck makes steering and pivoting easy. Once the truck is in place, engage the floor lock to lift and lower loads.

Warning: Never use to lift people.

Phenolic Wheel—They have nonmarking phenolic wheels that roll best on smooth surfaces.

	Platform				Overall						Base Leg			Front Wheel			Back Wheel
Overall Wt. Cap., lb.	Ht.	Lg.	Wd.	Load Center	Lg.	Ht.	For Pallet Wd.	Handle Ht.	Adjustment Mechanism	Body Material	Inside Spread	Outside Spread	Wheel Configuration	Dia.	Material	Type	Dia.	Material	Type	Specs. Met		Each
1,000	5 3/4" to 80"	24"	24"	15"	36"	93"	23" to 36"	43"	Push Button	Steel	15"	21"	Two Axle-Mounted Wheels and Two Swivel Casters	5"	Phenolic	Solid	4"	Phenolic	Solid	ANSI/ITSDF B56.10	2665T113	000000000
2,000	6" to 68"	24"	27"	15"	38"	83"	26" to 40"	52"	Push Button	Steel	20"	26"	Two Axle-Mounted Wheels and Two Swivel Casters	5"	Phenolic	Solid	5"	Phenolic	Solid	ANSI/ITSDF B56.10	2665T12	00000000

Floor-Load Electric Stationary Lift Tables for Pallets


Style A	Style B

Load pallets onto these tables directly from a pallet truck—no ramps or forklifts needed. When fully lowered, they sit close to the ground, so it’s easy to move loads on and off the floor. Roll a pallet truck into the center and lower the pallet onto the table. An electric motor and a hydraulic pump perform repetitive lifting and positioning with the push of a button or foot pedal. All tables have a toe guard at the base to protect you from foot injuries when the table is lowered.

Style A

Style A tables are hand-operated and have a U-shaped platform, so you can guide your pallet truck into the open center. Use them with plastic and wooden pallets with open bottoms, or with wire containers.

								Motor		Electrical
	Wt. Cap., lb.	Lg.	Wd.	Ht.	Elevation Speed, in/sec	Tabletop Ga.	Duty Cycle	Electrical Phase	Full Load Current, amp	Connection	No. of Blades	Power Cord Lg., ft.	Control Cord Lg., ft.	Specs. Met	Includes		Each
Hand/Push-Button Adjustment with 115V AC External Motor







				Powder-Coated Steel

				3,000	63"	53 1/2"	4 1/8" to 33 7/8"	3/4	6	10 Cycles per Hour	Single	18.5	Straight Blade	3	16	8	ANSI MH29.1	8-ft. Long Hydraulic Hose	9933N12	000000000

Style B

Style B tables are foot-operated and have a wide, solid platform that only sits _1/2" off ground when lowered for versatile, easy loading. Roll a pallet truck, cart, or trolley directly onto them. They hold open- and closed-bottom pallets, large containers, and bulky or irregularly shaped items.

							Motor
	Wt. Cap., lb.	Lg.	Wd.	Ht.	Elevation Speed, in/sec	Duty Cycle	Electrical Phase	Full Load Current, amp	Power Cord Lg., ft.	Control Cord Lg., ft.	Specs. Met	Includes		Each
Foot/Push-Button Adjustment with 460V AC External Motor







				Painted Steel

				4,000	51 1/2"	44"	1/2" to 36"	3/4	12 Cycles per Hour	Three	3.1	2	8	ANSI MH29.1	8-ft. Long Hydraulic Hose	9933N11	000000000

Air-Powered Stationary Lift Tables


	Bellows

Connect these tables to your compressed air system; a hydraulic pump and an air-driven motor make repetitive lifting and positioning less of a chore. Tables have a compact design, so they fit in confined spaces.

Warning: Never use to lift people.

Bellows—Bellows protect the working parts of the table from dust, dirt, and debris.

	Lift Tables															Bellows
	Wt. Cap., lb.	Lg.	Wd.	Ht.	Elevation Speed, in/sec	Tabletop Ga.	Air Pressure, psi	Air Inlet Pipe Size	Air Inlet Thread Type	Air Inlet Gender	Hose Lg., ft.	Control Cord Lg., ft.	Specs. Met		Each		Each
Steel



		550	32"	19 1/2"	6" to 28"	1/2	13	40	1/4	NPT	Female	6	6	ANSI MH29.1	8758T44	000000000	3740T74	0000000


		660	40"	20"	9 1/2" to 54"	3/4	10	40	1/4	NPT	Female	6	6	ANSI MH29.1	8758T47	00000000	3740T75	00000000
		1,100	40"	20"	6" to 31 1/2"	1/2	10	40	1/4	NPT	Female	6	6	ANSI MH29.1	8758T45	00000000	3740T76	00000000

Weighing and Counting Foot-Adjust Mobile Lift Table Scales


	Digital Display

Eliminate an extra lift—these lift tables weigh and count right from the lifting platform. They have a built-in scale, so they’re useful for inventory and shipping tasks. A check-weigh mode flags when an item falls outside your set weight range. In counting mode, these tables track inventory as you add and remove parts. A large digital display shows your measurements. Use the foot lever and hydraulic pump to raise loads to your ideal height. And turn the knob for controlled lowering.

Warning: Never use to lift people.

	Scales																						AA Batteries
											Batteries				Wheel
	Wt. Cap.	Accuracy	Graduations	Lg.	Wd.	Ht.	Elevation per Stroke	Material	Color	Frame Material	Included	Size	No. Req.	Handle Ht.	Configuration	Material	Dia.	No. of Brakes	Features	Specs. Met		Each	Pkg. Qty.		Pkg.
Ounces, Pounds, Grams, Kilograms



		1,000 lb. (450 kg)	±1 lb. (±0.5 kg)	0.5 lb. (0.2 kg)	32"	19 1/2"	14" to 38"	0.625"	Zinc-Plated Steel	Blue	Steel	No	AA	6	38"	Two Rigid Casters and Two Swivel Casters	Polyurethane Rubber	5"	2	Check-Weigh Mode Counting Mode Tare Function	ANSI MH29.1	9917N111	000000000	4	71455K53	00000

Battery-Operated Lift Trucks with Forks


Counterbalanced Base	Adjustable-Width Straddle Base	Adjustable-Width Straddle Base Pivoting Handle

Lift and lower heavy loads with the push of a button—these trucks have a battery-powered hydraulic pump. They’re easier to use than manual lift trucks, since you don’t need to turn a crank or pump a pedal. You can also make finer height adjustments to position loads exactly where you need them. Two swivel casters at the rear of the lift truck make steering and pivoting easy. Adjust the width of the forks to fit pallets, skids, and other loads in many sizes.

Warning: Never use to lift people.

Counterbalanced Base—Counterbalanced bases require counterbalance weights (sold separately) to offset loads. Unlike straddle bases, they don’t have front-facing legs that can get in the way when you’re loading or unloading racks, trucks, or machinery.

Adjustable-Width Straddle Base—Adjustable-width straddle bases have front-facing legs that sit on either side of your load for support. You can adjust the width to fit them around open and closed-bottom pallets.

Pivoting Handle—Those with a pivoting handle give you better leverage and control in tight spaces. The handle adjusts up or down.

	Lift Trucks																				Counterbalance Weights
		Fork							Overall				Base Leg
	Overall Wt. Cap., lb.	Lg.	Wd.	Min. Ht.	Max. Ht.	Outside Spread	Inside Spread	Load Center	Lg.	Ht.	For Pallet Wd.	Handle Ht.	Inside Spread	Outside Spread	Wheel Configuration	Front Wheel Material	Back Wheel Material	Features		Each	Includes		Each
Steel Body







				Counterbalanced Base with Floor Lock

				1,000	25"	3"	1"	64"	6 1/2" to 24 1/2"	1/2" to 18 1/2"	13"	61"	83"	26" to 32"	38"	20 1/4"	26 1/4"	Two Axle-Mounted Wheels and Two Swivel Casters	Phenolic	Phenolic	—	2813T41	000000000	Twelve 50-lb. Weights	2813T33	000000000


				1,000	25"	3"	1"	76"	6 1/2" to 24 1/2"	1/2" to 18 1/2"	13"	61"	92"	26" to 32"	38"	20 1/4"	26 1/4"	Two Axle-Mounted Wheels and Two Swivel Casters	Phenolic	Phenolic	—	2813T42	00000000	Twelve 50-lb. Weights	2813T33	00000000




						Adjustable-Width Straddle Base with Wheel Brake

						770	30"	3"	1 9/16"	59"	6" to 19 1/2"	0" to 13"	15"	47"	82"	40" to 47"	56"	40 1/8" to 50"	44 7/8" to 54 3/4"	Two Axle-Mounted Wheels and Two Swivel Casters	Phenolic	Phenolic	—	2814T101	00000000	—	———	0


						2,000	42"	4"	2 1/8"	63"	8" to 26 1/2"	0" to 18 1/2"	19 1/2"	66"	78"	40" to 47"	57"	38" to 50"	46" to 58"	Two Axle-Mounted Wheels and Two Swivel Casters	Nylon	Nylon	Pivoting Handle	2814T102	00000000	—	———	0

Long-Tabletop Electric Stationary Lift Tables

Designed for lifting oversized items, these tables are wider and longer than standard lift tables. They have an electric motor and a hydraulic pump, so you can position heavy loads with the push of a button. The NEMA rating only applies to the push-button control.

Warning: Never use to lift people.

Scissor


	Bellows

Bellows—Bellows protect the working parts of the table from dust, dirt, and debris.

	Lift Tables															Bellows
								Motor
	Wt. Cap., lb.	Lg.	Wd.	Ht.	Elevation Speed, in/sec	Tabletop Ga.	Duty Cycle	Electrical Phase	Full Load Current, amp	Power Cord Lg., ft.	Control Cord Lg., ft.	Enclosure Rating	Specs. Met		Each		Each
Painted Steel Body







				With 115V AC Motor

				2,000	96"	48"	7 5/8" to 55"	2 1/4	7	42 Cycles per Hour	Single	24	10	10	NEMA 1	ANSI MH29.1	2874T101	000000000	3740T101	000000000

Dual Scissor


	Bellows

Dual-scissor lift tables can handle four times as much weight as tables with a single scissor lift. Weight is distributed evenly across the two side-by-side scissor lifts, so they’re less likely to wobble or tip under large or uneven loads.

Bellows—Bellows protect the working parts of the table from dust, dirt, and debris.

	Lift Tables														Bellows
							Motor
	Wt. Cap., lb.	Lg.	Wd.	Ht.	Elevation Speed, in/sec	Duty Cycle	Electrical Phase	Full Load Current, amp	Power Cord Lg., ft.	Control Cord Lg., ft.	Enclosure Rating	Specs. Met		Each		Each
Painted Steel Body







				With 230V AC Motor

				8,000	96"	48"	7 1/4" to 43"	5/8	15 Cycles per Hour	Three	24	10	10	NEMA 1	ANSI MH29.1	2874T102	0000000000	3740T66	000000000

Motor-Driven Battery-Operated Lift Trucks with Forks

Fully powered to do the heavy lifting and moving for you. A motorized throttle controls forward and reverse movement, while a battery-powered hydraulic pump raises and lowers loads with the push of a button. The powered drive makes these trucks ideal for moving loads long distances in your facility. Compared to manual lift trucks, they offer greater control and more precise adjustments. These trucks include a built-in charger that plugs into a standard wall outlet.

The narrow mast provides a clear view for loading and maneuvering into position. These trucks glide on all floor types, including areas with debris.

Warning: Never use to lift people.

Adjustable-Width Straddle Base—These trucks have adjustable-width straddle legs that fit around both open- and closed-bottom pallets. You can also make the forks narrower or wider to slide them right under your load.

Polyurethane Rubber Wheel—They have polyurethane rubber wheels that are nonmarking, abrasion resistant, and shock absorbent.

		Fork							Overall						Base Leg			Front Wheel			Back Wheel
	Overall Wt. Cap., lb.	Lg.	Wd.	Min. Ht.	Max. Ht.	Outside Spread	Inside Spread	Load Center	Lg.	Ht.	For Pallet Wd.	Handle Ht.	Body Material	Mast Type	Inside Spread	Outside Spread	Wheel Configuration	Dia.	Material	Type	Dia.	Material	Type	Specs. Met		Each
Adjustable-Width Straddle Base



		2,200	45"	4"	1 1/2"	63"	10" to 31 1/2"	2" to 23 1/2"	24"	71"	77"	18" to 40"	49"	Steel	Narrow	38" to 50"	46" to 58"	Four Axle-Mounted Wheels	3"	Polyurethane Rubber	Solid	8"	Polyurethane Rubber	Solid	ANSI/ITSDF B56.10	9970N11	000000000

Self-Lifting Battery-Operated Lift Trucks with Forks

Skip the ramp—these battery-powered trucks lift cargo and then themselves into trailers to position pallets inside. With the press of a button, they raise loads from ground level to trailer height. Once the load is in place, manually retract the legs to move them out of the way, then press the button again to lift the truck inside the trailer. Engage the wheel brakes before lifting or lowering a load.

Warning: Never use to lift people.

	Fork							Overall						Base Leg
Overall Wt. Cap., lb.	Lg.	Wd.	Min. Ht.	Max. Ht.	Outside Spread	Inside Spread	Load Center	Lg.	Ht.	For Pallet Wd.	Handle Ht.	Body Material	Base Type	Inside Spread	Outside Spread	Front Wheel Material	Center Wheel Material	Back Wheel Material	Features	Specs. Met		Each
1,100	43"	6 1/4"	3"	54"	21 1/4"	8 11/16"	24"	63"	69"	26" to 40"	51"	Steel	Straddle	11 1/4"	19 1/8"	Nylon	Nylon	Polyurethane Rubber	Retractable Legs	ASME B56.1	9929N11	000000000