Filter by
Product Family
Sold As
Material
Overall Length
Length
Shank Type
Export Control Classification Number (ECCN)
DFARS Specialty Metals
Tool Type
Container Type
Specifications Met
Screwdrivers for Stainless Steel Screws
 |  |
Grooved Tip |
Shaft | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Drive Size | Relative Lg. | Overall Lg. | Lg. | Overall Wd. | Tip Texture | Material | Mfr. | Each | |||
Phillips | |||||||||||
Premium | |||||||||||
| No. 1 | Standard | 7" | 3 1/8" | 3/16" | Grooved | Stainless Steel | Wera | 56405A52 | 000000 | ||
| No. 2 | Standard | 8 1/4" | 4" | 1/4" | Grooved | Stainless Steel | Wera | 56405A53 | 00000 | ||
| No. 3 | Standard | 10 1/2" | 6" | 5/16" | Grooved | Stainless Steel | Wera | 56405A57 | 00000 | ||
Slotted | |||||||||||
Premium | |||||||||||
| 5/32" | Standard | 8" | 4" | 5/32" | Grooved | Stainless Steel | Wera | 56405A63 | 00000 | ||
| 7/32" | Standard | 8 3/4" | 5" | 7/32" | Grooved | Stainless Steel | Wera | 56405A62 | 00000 | ||
| 1/4" | Standard | 10" | 6" | 1/4" | Grooved | Stainless Steel | Wera | 56405A44 | 00000 | ||
| 5/16" | Standard | 11 1/4" | 7" | 5/16" | Grooved | Stainless Steel | Wera | 56405A45 | 00000 | ||
| 3/8" | Standard | 12 1/2" | 8" | 3/8" | Grooved | Stainless Steel | Wera | 56405A56 | 00000 | ||
Pozidriv® | |||||||||||
Premium | |||||||||||
| No. 1 | Standard | 7" | 3 1/8" | 3/16" | Grooved | Stainless Steel | Wera | 56405A113 | 00000 | ||
| No. 2 | Standard | 8 1/8" | 4" | 1/4" | Grooved | Stainless Steel | Wera | 56405A114 | 00000 | ||
| No. 3 | Standard | 10 5/16" | 6" | 5/16" | Grooved | Stainless Steel | Wera | 56405A115 | 00000 | ||
Screwdrivers
 |
|
Grooved Tip |
A staple in any toolbox, these are your go-to screwdrivers for routine maintenance and repair. The handle is made from a combination of soft, grippy plastic for high torque and smooth, hard plastic for quick grip adjustments and high-speed turning. It's also contoured to maximize comfort and minimize hand strain, fatigue, and blisters, even with extended use.
Premium—The best screwdrivers available, with tips machined to tight tolerances for the tightest possible fit in fastener recesses. The snug fit means they'll turn screws quickly without wearing screw heads and the driver's tip.
Standard Length—The most common screwdriver length for a specific drive size.
Long—An extended shaft turns screws in deep recesses other screwdrivers can't reach.
Grooved Tip—Bites into the screw drive for a firm hold, so you can make fast, easy turns without slippage.
Shaft | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Drive Size | Relative Lg. | Overall Lg. | Lg. | Overall Wd. | Tip Texture | Material | Mfr. | Each | |||
Phillips | |||||||||||
Premium | |||||||||||
| No. 1 | Standard | 7" | 3 1/8" | 3/16" | Grooved | Nickel-Plated Steel | Wera | 55095A32 | 00000 | ||
| No. 1 | Long | 11 3/4" | 7 7/8" | 3/16" | Grooved | Nickel-Plated Steel | Wera | 55095A33 | 0000 | ||
| No. 2 | Standard | 8" | 3 15/16" | 1/4" | Grooved | Nickel-Plated Steel | Wera | 55095A35 | 00000 | ||
| No. 2 | Long | 10" | 5 7/8" | 1/4" | Grooved | Nickel-Plated Steel | Wera | 55095A36 | 00000 | ||
| No. 2 | Long | 12" | 8" | 1/4" | Grooved | Nickel-Plated Steel | Wera | 55095A112 | 00000 | ||
| No. 3 | Standard | 10 5/16" | 6" | 5/16" | Grooved | Nickel-Plated Steel | Wera | 9581N114 | 00000 | ||
Slotted | |||||||||||
Premium | |||||||||||
| 5/32" | Standard | 7 13/16" | 4" | 5/32" | Grooved | Nickel-Plated Steel | Wera | 9699N119 | 0000 | ||
| 5/32" | Long | 9 3/4" | 6" | 5/32" | Grooved | Nickel-Plated Steel | Wera | 9699N121 | 0000 | ||
| 5/32" | Long | 11 3/4" | 8" | 5/32" | Grooved | Nickel-Plated Steel | Wera | 9699N122 | 0000 | ||
| 3/16" | Standard | 7 13/16" | 4" | 3/16" | Grooved | Nickel-Plated Steel | Wera | 9581N121 | 0000 | ||
| 7/32" | Standard | 8 3/4" | 5" | 7/32" | Grooved | Nickel-Plated Steel | Wera | 9699N124 | 0000 | ||
| 7/32" | Long | 9 3/4" | 6" | 7/32" | Grooved | Nickel-Plated Steel | Wera | 9699N125 | 0000 | ||
| 7/32" | Long | 11 3/4" | 8" | 7/32" | Grooved | Nickel-Plated Steel | Wera | 9699N126 | 00000 | ||
| 1/4" | Standard | 8 1/16" | 4" | 1/4" | Grooved | Nickel-Plated Steel | Wera | 9699N131 | 0000 | ||
| 1/4" | Long | 9 1/16" | 5" | 1/4" | Grooved | Nickel-Plated Steel | Wera | 9581N118 | 00000 | ||
| 1/4" | Long | 10" | 6" | 1/4" | Grooved | Nickel-Plated Steel | Wera | 9699N128 | 00000 | ||
| 1/4" | Long | 12" | 8" | 1/4" | Grooved | Nickel-Plated Steel | Wera | 9699N129 | 00000 | ||
| 9/32" | Standard | 10" | 6" | 9/32" | Grooved | Nickel-Plated Steel | Wera | 9699N132 | 00000 | ||
| 5/16" | Standard | 11 5/16" | 7" | 5/16" | Grooved | Nickel-Plated Steel | Wera | 9581N122 | 00000 | ||
| 3/8" | Standard | 12 5/16" | 8" | 3/8" | Grooved | Nickel-Plated Steel | Wera | 9699N133 | 00000 | ||
JIS | |||||||||||
Premium | |||||||||||
| No. 2 | Long | 10 1/4" | 5 7/8" | 1/4" | Grooved | Chrome-Plated Steel | Vessel | 53325A212 | 00000 | ||
| No. 2 | Long | 20 1/16" | 15 3/4" | 1/4" | Grooved | Chrome-Plated Steel | Vessel | 53325A213 | 00000 | ||
Pozidriv® | |||||||||||
Premium | |||||||||||
| No. 1 | Standard | 7" | 3 1/8" | 3/16" | Grooved | Nickel-Plated Steel | Wera | 9708N112 | 0000 | ||
| No. 1 | Long | 11 3/4" | 8" | 3/16" | Grooved | Nickel-Plated Steel | Wera | 9708N113 | 00000 | ||
| No. 2 | Standard | 8 1/16" | 4" | 1/4" | Grooved | Nickel-Plated Steel | Wera | 9708N115 | 00000 | ||
| No. 2 | Long | 12" | 8" | 1/4" | Grooved | Nickel-Plated Steel | Wera | 9708N116 | 00000 | ||
| No. 2 | Long | 14" | 10" | 1/4" | Grooved | Nickel-Plated Steel | Wera | 9708N117 | 00000 | ||
| No. 3 | Standard | 10 5/16" | 6" | 5/16" | Grooved | Nickel-Plated Steel | Wera | 9708N119 | 00000 | ||
Electrical Insulating Screwdrivers
 |
|
Grooved Tip |
 |
Standard Insulated Shaft |
Prevent a dangerous zap if you accidentally touch a live circuit. An insulated handle and shaft absorb up to 1,000 volts of electric shock to meet ASTM, EN, or IEC standards. Use these screwdrivers for everything from installing electrical panels to repairing outlets, switches, and light fixtures.
Premium—The best screwdrivers available, with tips machined to tight tolerances for the tightest possible fit in fastener recesses. The snug fit means they'll turn screws quickly without wearing screw heads and the driver's tip.
Standard Length—The most common screwdriver length for a specific drive size.
Long—An extended shaft turns screws in deep recesses other screwdrivers can't reach.
Grooved Tip—Bites into the screw drive for a firm hold, so you can make fast, easy turns without slippage.
Shaft | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Drive Size | Relative Lg. | Overall Lg. | Lg. | Overall Wd. | Insulated Shaft Type | Tip Texture | Material | Mfr. | Specs. Met | Each | |||
Phillips | |||||||||||||
Premium | |||||||||||||
| No. 1 | Standard | 7" | 3 1/8" | 1/4" | Standard | Grooved | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A32 | 000000 | ||
| No. 1 | Long | 9 3/4" | 6" | 9/32" | Standard | Grooved | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A252 | 00000 | ||
| No. 2 | Standard | 8 1/4" | 4" | 5/16" | Standard | Grooved | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A33 | 00000 | ||
| No. 2 | Long | 12" | 8" | 11/32" | Standard | Grooved | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A254 | 00000 | ||
| No. 3 | Standard | 10 1/4" | 6" | 3/8" | Standard | Grooved | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A34 | 00000 | ||
Slotted | |||||||||||||
Premium | |||||||||||||
| 5/32" | Standard | 7 13/16" | 4" | 1/4" | Standard | Grooved | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A12 | 0000 | ||
| 5/32" | Long | 9 3/4" | 6" | 9/32" | Standard | Grooved | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A259 | 00000 | ||
| 7/32" | Standard | 8 3/4" | 5" | 5/16" | Standard | Grooved | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A14 | 00000 | ||
| 7/32" | Long | 11 3/4" | 8" | 11/32" | Standard | Grooved | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A261 | 00000 | ||
| 1/4" | Standard | 10" | 6" | 5/16" | Standard | Grooved | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A18 | 00000 | ||
| 1/4" | Long | 12" | 8" | 11/32" | Standard | Grooved | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A262 | 00000 | ||
| 5/16" | Standard | 11 1/4" | 7" | 3/8" | Standard | Grooved | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A13 | 00000 | ||
| 5/16" | Standard | 12 5/16" | 8" | 7/16" | Standard | Grooved | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A263 | 00000 | ||
| 3/8" | Standard | 12 1/4" | 8" | 15/32" | Standard | Grooved | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A15 | 00000 | ||
Pozidriv® | |||||||||||||
Premium | |||||||||||||
| No. 1 | Standard | 7" | 3 1/8" | 9/32" | Standard | Grooved | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A276 | 00000 | ||
| No. 2 | Standard | 8 1/16" | 4" | 11/32" | Standard | Grooved | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A283 | 00000 | ||
| No. 2 | Long | 12" | 8" | 11/32" | Standard | Grooved | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A277 | 00000 | ||
| No. 3 | Standard | 10 1/2" | 6" | 3/8" | Standard | Grooved | Plastic-Coated Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 7020A57 | 00000 | ||
Sure-Grip Phillips Bits
Drive Size | For Screw Size | Overall Lg. | Material | Tip Style | Each | |||
|---|---|---|---|---|---|---|---|---|
For Hand Tools | ||||||||
 Hex Shank | ||||||||
1/4" Hex Shank Size | ||||||||
| No. 1 | No. 2, No. 3, No. 4 | 1" | Steel | Grooved | 7164A66 | 00000 | ||
| No. 2 | No. 5, No. 6, No. 7, No. 8, No. 9, No. 10 | 1" | Steel | Grooved | 7164A67 | 0000 | ||
| No. 2 | No. 5, No. 6, No. 7, No. 8, No. 9, No. 10 | 2" | Steel | Grooved | 7164A69 | 0000 | ||
| No. 3 | No. 12, 1/4" | 1" | Steel | Grooved | 7164A68 | 0000 | ||
5/16" Hex Shank Size | ||||||||
| No. 2 | No. 5, No. 6, No. 7, No. 8, No. 9, No. 10 | 1 1/4" | Steel | Grooved | 7164A73 | 0000 | ||
| No. 3 | No. 12, 1/4" | 1 1/4" | Steel | Grooved | 7164A74 | 0000 | ||
| No. 4 | 5/16", 3/8", 7/16", 1/2" | 1 1/4" | Steel | Grooved | 7164A75 | 0000 | ||
For Power Tools | ||||||||
 Quick-Change Hex Shank | ||||||||
1/4" Quick-Change Hex Shank Size | ||||||||
| No. 1 | No. 2, No. 3, No. 4 | 2" | Steel | Grooved | 83445A41 | 0000 | ||
| No. 1 | No. 2, No. 3, No. 4 | 6" | Steel | Grooved | 83445A46 | 0000 | ||
| No. 2 | No. 5, No. 6, No. 7, No. 8, No. 9, No. 10 | 2" | Steel | Grooved | 83445A42 | 0000 | ||
| No. 2 | No. 5, No. 6, No. 7, No. 8, No. 9, No. 10 | 2 3/4" | Steel | Grooved | 83445A44 | 0000 | ||
| No. 2 | No. 5, No. 6, No. 7, No. 8, No. 9, No. 10 | 3 1/2" | Steel | Grooved | 83445A45 | 0000 | ||
| No. 2 | No. 5, No. 6, No. 7, No. 8, No. 9, No. 10 | 6" | Steel | Grooved | 83445A47 | 0000 | ||
| No. 3 | No. 12, 1/4" | 2" | Steel | Grooved | 83445A43 | 0000 | ||
| No. 3 | No. 12, 1/4" | 6" | Steel | Grooved | 83445A48 | 0000 | ||
Sure-Grip Torq-Set® Bits
 |
Hex Shank |
 |
Quick-Change Hex Shank |
For Screw Size | Overall Lg. | Material | Tip Style | Each | |||
|---|---|---|---|---|---|---|---|
For Hand Tools | |||||||
1/4" Hex Shank Size | |||||||
| No. 6 | 1" | Steel | Grooved | 5225A11 | 00000 | ||
| No. 8 | 1" | Steel | Grooved | 5225A12 | 0000 | ||
| No. 10 | 1" | Steel | Grooved | 5225A13 | 0000 | ||
| 1/4" | 1" | Steel | Grooved | 5225A14 | 0000 | ||
For Power Tools | |||||||
1/4" Quick-Change Hex Shank Size | |||||||
| No. 6 | 2" | Steel | Grooved | 5225A21 | 00000 | ||
| No. 8 | 2" | Steel | Grooved | 5225A22 | 00000 | ||
| No. 10 | 2" | Steel | Grooved | 5225A23 | 00000 | ||
Sure-Grip Phillips Bit Sets
 |  |
Hex Shank | Quick-Change Hex Shank |
Grooves on the tip bite into Phillips screw slots to prevent slipping. The bits in these sets align easily with fasteners and deliver more torque than slotted bits.
Hex Shank—Also known as insert bits, these snap into hand tools. If you want to use them with power tools, attach a bit adapter (not included).
Quick-Change Hex Shank—Lock these bits directly into power tools. They won't wobble as much as bits paired with an adapter, so they are the best choice for high-precision tasks.
Steel—Best for dry environments, since moisture will cause these bits to rust.
Components Included | Bits Included | Material | Tip Style | Container Type | Each | |||
|---|---|---|---|---|---|---|---|---|
For Hand Tools | ||||||||
1/4" Hex Shank Size | ||||||||
| 6 Bits | Phillips: No. 1, No. 2, No. 3 (1" O'all Lg.)—2 ea. | Steel | Grooved | Plastic Pouch | 7164A72 | 00000 | ||
For Power Tools | ||||||||
1/4" Quick-Change Hex Shank Size | ||||||||
| 6 Bits | Phillips: No. 1, No. 2, No. 3 (2" O'all Lg.)—2 ea. | Steel | Grooved | Plastic Pouch | 83445A61 | 00000 | ||
Screwdriver Sets
 |
Keep a selection of screwdrivers on hand to turn fasteners of any size. The handles are made from a combination of soft, grippy plastic for high torque and smooth, hard plastic for quick grip adjustments and high-speed turning. They're also contoured to maximize comfort and minimize hand strain, fatigue, and blisters, even with extended use.
Premium—The best screwdrivers available, with tips machined to tight tolerances for the tightest possible fit in fastener recesses. The snug fit means they'll turn screws quickly without wearing screw heads and the driver's tip.
No. of Pieces | Includes | Material | Mfr. | Container Type | Each | |||
|---|---|---|---|---|---|---|---|---|
Phillips, Slotted, Torx, and Pozidriv® | ||||||||
Premium | ||||||||
| 7 | 5/32" Slotted Screwdriver—7 13/16" O'all Lg. No. 1 Pozidriv® Screwdriver—7" O'all Lg. No. 2 Phillips Screwdriver—8 1/16" O'all Lg. No. 2 Pozidriv® Screwdriver—8 1/16" O'all Lg. T15 Torx Screwdriver—7" O'all Lg. T20 Torx Screwdriver—7 13/16" O'all Lg. T25 Torx Screwdriver—8 1/16" O'all Lg. | Nickel-Plated Steel | Wera | Plastic Rack | 9581N138 | 000000 | ||
| 11 | No. 1 Pozidriv® Screwdriver—7" O'all Lg. No. 2 Phillips Screwdriver—8 1/16" O'all Lg. No. 2 Pozidriv® Screwdriver—8 1/16" O'all Lg. T10 Torx Screwdriver—6 5/16" O'all Lg. T15 Torx Screwdriver—7" O'all Lg. T20 Torx Screwdriver—7 13/16" O'all Lg. T25 Torx Screwdriver—8 1/16" O'all Lg. 3/16" Slotted Screwdriver—7 3/8" O'all Lg. 9/32" Slotted Screwdriver—9 1/16" O'all Lg. No. 1 Phillips Screwdriver—7" O'all Lg. T30 Torx Screwdriver—8 11/16" O'all Lg. | Nickel-Plated Steel | Wera | Tote | 9581N139 | 000000 | ||
JIS and Slotted | ||||||||
Premium | ||||||||
| 6 | 1/4" Slotted Screwdriver—8 1/4" O'all Lg. No. 2 JIS Screwdriver—8 1/4" O'all Lg. 5/32" Slotted Screwdriver—6" O'all Lg. 7/32" Slotted Screwdriver—6 7/8" O'all Lg. No. 0 JIS Screwdriver—6" O'all Lg. No. 1 JIS Screwdriver—6 7/8" O'all Lg. | Chrome-Plated Steel | Vessel | — | 9581N111 | 00000 | ||
Strikable Screwdrivers
 |  |
Strike with Hammer | Shown Using Hex-Shaped Bolster |
 | |
Grooved Tip |
These are the toughest, most durable screwdrivers around. Whack them with a hammer to loosen stripped screws or pry off boards. Also known as demolition screwdrivers, their steel shaft extends all the way through the handle and there's a metal end cap for striking. If you need extra torque to turn a stubborn screw, grip the hex-shaped bolster at the top of the handle with a wrench.
Premium—The best screwdrivers available, with tips machined to tight tolerances for the tightest possible fit in fastener recesses. The snug fit means they'll turn screws quickly without wearing screw heads and the driver's tip.
Standard Length—The most common screwdriver length for a specific drive size.
Long—An extended shaft turns screws in deep recesses other screwdrivers can't reach.
Grooved Tip—Bites into the screw drive for a firm hold, so you can make fast, easy turns without slippage.
Shaft | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Drive Size | Relative Lg. | Overall Lg. | Lg. | Overall Wd. | Tip Texture | Material | Cap Material | Mfr. | Each | |||
JIS | ||||||||||||
Premium | ||||||||||||
| No. 1 | Standard | 6 15/16" | 3" | 7/32" | Grooved | Chrome-Plated Steel | Chrome-Plated Steel | Vessel | 7249A82 | 000000 | ||
| No. 2 | Standard | 8 3/8" | 4" | 1/4" | Grooved | Chrome-Plated Steel | Chrome-Plated Steel | Vessel | 7249A83 | 00000 | ||
| No. 2 | Long | 10 3/8" | 6" | 1/4" | Grooved | Chrome-Plated Steel | Chrome-Plated Steel | Vessel | 7249A84 | 00000 | ||
| No. 3 | Standard | 10 15/16" | 6" | 5/16" | Grooved | Chrome-Plated Steel | Chrome-Plated Steel | Vessel | 7249A85 | 00000 | ||
Electrical Insulating Screwdrivers for Stainless Steel Screws
 |
|
Grooved Tip |
|
Standard Insulated Shaft |
Prevent a dangerous zap if you accidentally touch a live circuit while turning stainless steel screws. These screwdrivers have an insulated handle and shaft that absorb up to 1,000 volts of electric shock to meet ASTM, EN, or IEC standards. Unlike steel drivers, these stainless steel tools won’t shed steel particles that can cause screw heads to rust or develop orange streaks. They also resist corrosion, so they’re often used on equipment near chemicals or saltwater.
The handle is made from a combination of soft, grippy plastic for high torque and smooth, hard plastic for quick grip adjustments and high-speed turning. It's also contoured to maximize comfort and minimize hand strain, fatigue, and blisters, even with extended use.
Premium—The best screwdrivers available, with tips machined to tight tolerances for the tightest possible fit in fastener recesses. The snug fit means they'll turn screws quickly without wearing screw heads and the driver's tip.
Standard Length—The most common screwdriver length for a specific drive size.
Grooved Tip—Bites into the screw drive for a firm hold, so you can make fast, easy turns without slippage.
Shaft | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Drive Size | Relative Lg. | Overall Lg. | Lg. | Overall Wd. | Insulated Shaft Type | Tip Texture | Material | Mfr. | Specs. Met | Each | |||
Phillips | |||||||||||||
Premium | |||||||||||||
| No. 1 | Standard | 7" | 3 1/8" | 1/4" | Standard | Grooved | Stainless Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 9602N11 | 000000 | ||
| No. 2 | Standard | 8 1/16" | 4" | 5/16" | Standard | Grooved | Stainless Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 9602N12 | 00000 | ||
Slotted | |||||||||||||
Premium | |||||||||||||
| 1/8" | Standard | 6 5/16" | 3 1/8" | 1/8" | Standard | Grooved | Stainless Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 9602N13 | 0000 | ||
| 9/64" | Standard | 7 1/8" | 4" | 1/8" | Standard | Grooved | Stainless Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 9602N14 | 0000 | ||
| 5/32" | Standard | 7 13/16" | 4" | 5/32" | Standard | Grooved | Stainless Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 9602N15 | 00000 | ||
| 7/32" | Standard | 8 3/4" | 5" | 7/32" | Standard | Grooved | Stainless Steel | Wera | IEC 60900, EN 60900, ASTM F1505 | 9602N16 | 00000 | ||
