Antislip Floor Paint | McMaster-Carr

Filter by

Container Type

Color

For Use On

Container Size

Appearance

Formulation

Solution Type

Type

Primer Required for Use On

Maximum Temperature

Mixing Required

Overall Dry Time

Material

Touch Dry Time

Minimum Temperature

Performance

Maximum Application Temperature

RoHS

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

Approximate Coverage @ Thickness

REACH

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

EAR99

Minimum Application Temperature

Specifications Met

OSHA Compliant 29 CFR 1910.22

For Topcoat Composition

22 Products

Antislip Protective Coatings

Longer-lasting than antislip tape, these coatings contain grit to provide traction. They’re good for areas with pedestrian traffic.

Epoxy—Aerosol Can

		Dry Time
Container Net Wt., oz.	Solution Type	Touch, min.	Overall, hr.	Approx. Coverage @ Thk.	Mixing Req.	Max. Temp., ° F	Application Temp. Range, ° F	For Use Outdoors	For Use On	Choose a Color		Each



	12	Solvent Based	20	24	15 ft² @ 1 mil	No	250	50 to 90	Yes	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Iron, Galvanized Iron, Galvanized Steel, Fiberglass, Masonry, Concrete, Stone, Asphalt, Wood	Gloss Black , Gloss Clear , Gloss Dark Gray , Gloss Red , Gloss Yellow	63825T74	000000

Covers

		Each
Roller Cover for Solvent-Based Coatings	6439T73	00000

Acrylic Plastic—Can

Apply gallon-sized water-based coatings with a roller.

Apply acrylic plastic coatings with a roller or sprayer.

Water Based—Water-based epoxy coatings are clear and can be applied over nearly any surface, even old coatings, without altering their appearance. These two-part coatings come with a mixer that attaches to a hand-held drill and a roller cover to apply them once mixed. The size listed is the combined total of the two parts.

		Dry Time, hr.
Container Size, gal.	Solution Type	Touch	Overall	Approx. Coverage, ft²	Mixing Req.	Max. Temp., ° F	Application Temp. Range, ° F	For Use Outdoors	For Use On	Primer Req. for Use On	Choose a Color		Each



	1	Water Based	4	24	70	Yes	160	50 to 130	Yes	Steel, Iron, Concrete, Asphalt, Wood	Steel, Iron, Concrete, Wood, Asphalt	Gloss Black , Gloss Gray	6135T48	000000

Covers

		Each
Roller Cover for Solvent-Based Coatings	6439T73	00000

Epoxy—Can

Apply gallon-sized solvent-based coatings with a notched trowel, sprayer, or a roller cover for thick coatings (sold separately).

Apply gallon-sized water-based coatings with a roller.

OSHA Compliant 29 CFR 1910.22—Coatings that comply with OSHA 29 CFR 1910.22 meet requirements for walking-working surfaces.

		Dry Time
Container Size, gal.	Solution Type	Touch	Overall	Approx. Coverage @ Thk.	Approx. Coverage, ft²	Mixing Req.	Mix Ratio	Application Time After Mixing, min.	Max. Temp., ° F	Application Temp. Range, ° F	Specs. Met	For Use Outdoors	For Use On	Primer Req. for Use On	Includes	Choose a Color		Each



	1	Water Based	27 min.	30 min.	185 ft² @ 38 mil	—	Yes	4:1	25	180	50 to 120	OSHA Compliant 29 CFR 1910.22	Yes	Aluminum, Brass, Copper, Steel, Stainless Steel, Galvanized Iron, Galvanized Steel, Plastic, Rubber, Ceramic, Glass, Masonry, Concrete, Stone, Asphalt, Drywall	—	Mixer, Roller Cover	Gloss Clear	6135T11	0000000


	1	Solvent Based	12 hr.	3 day	—	50	No	—	—	160	50 to 120	ASTM F609	Yes	Aluminum, Steel, Iron, Fiberglass, Concrete, Wood	Aluminum, Steel, Iron, Concrete, Wood	—	Flat Black , Flat Dark Gray , Flat Yellow	63045T36	000000

Covers

		Each
Roller Cover for Solvent-Based Coatings	6439T73	00000

Heavy Duty Vehicle-Grade Antislip Protective Coatings

These provide the highest traction and impact resistance of our antislip coatings. Longer-lasting than antislip tape, these coatings contain grit to provide traction. Apply with a roller. The resin and hardener come in separate containers that can be mixed in the pail. The size listed is the combined total of the two parts. They cannot be sold to the regions listed because they exceed local regulatory limits on VOCs (volatile organic compounds).

Epoxy—Can

		Dry Time
Container Size, gal.	Solution Type	Touch, hr.	Overall, day	Approx. Coverage @ Thk.	Mixing Req.	Application Time After Mixing, hr.	Max. Temp., ° F	Application Temp. Range, ° F	Mil. Spec.	For Use Outdoors	For Use On	Primer Req. for Use On	Color	Cannot Be Sold To		Each



	1	Solvent Based	24	4	25 ft² @ 2 mil	Yes	8	160	40 to 100	MIL-PRF-24667 Type II Composition G, MIL-PRF-24667 Type IV Composition G	Yes	Aluminum, Steel, Iron, Concrete, Wood	Aluminum, Steel, Iron, Concrete, Wood	Flat Dark Gray	Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA	6506T51	0000000

Epoxy—Pail

MIL-PRF-24667 Type I Composition G—Coatings that meet MIL-PRF 24667 Type 1 are our most wear and impact resistant. They can also be applied with a notched trowel.

		Dry Time
Container Size, gal.	Solution Type	Touch, hr.	Overall, day	Approx. Coverage @ Thk.	Mixing Req.	Application Time After Mixing, hr.	Max. Temp., ° F	Application Temp. Range, ° F	Mil. Spec.	For Use Outdoors	For Use On	Primer Req. for Use On	Color	Cannot Be Sold To		Each



	5	Solvent Based	24	4	125 ft² @ 2 mil	Yes	4	160	40 to 100	MIL-PRF-24667 Type I Composition G, MIL-PRF-24667 Type II Composition G	Yes	Aluminum, Steel, Iron, Concrete, Wood	Aluminum, Steel, Iron, Concrete, Wood	Flat Dark Gray	Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA	6506T55	0000000


	5	Solvent Based	24	4	125 ft² @ 2 mil	Yes	8	160	40 to 100	MIL-PRF-24667 Type II Composition G, MIL-PRF-24667 Type IV Composition G	Yes	Aluminum, Steel, Iron, Concrete, Wood	Aluminum, Steel, Iron, Concrete, Wood	Flat Dark Gray	Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA	6506T53	000000

Low-Odor Vehicle-Grade Antislip Protective Coatings

These high-traction antislip coatings have zero VOCs and are low odor. They contain grit to provide traction for pedestrian, cart, and hand-truck traffic. Apply with a roller. The size listed is the combined total of the two parts.

Epoxy—Can

Solution Type	Overall Dry Time, hr.	Approx. Coverage @ Thk.	Mixing Req.	Mix Ratio	Application Time After Mixing, min.	Max. Temp., ° F	Application Temp. Range, ° F	Specs. Met	For Use Outdoors	For Use On	Choose a Color		Each



1/2	Water Based	48	25 ft² @ 30 mil	Yes	3:1	45	300	50 to 100	ADA Compliant, ASTM D3960	Yes	Aluminum, Steel, Iron, Concrete, Wood	Semi-Gloss Black , Semi-Gloss Gray , Semi-Gloss Red , Semi-Gloss Yellow	6454T31	000000


1	Water Based	48	50 ft² @ 30 mil	Yes	3:1	45	300	50 to 100	ADA Compliant, ASTM D3960	Yes	Aluminum, Steel, Iron, Concrete, Wood	Semi-Gloss Black , Semi-Gloss Gray , Semi-Gloss Red , Semi-Gloss Yellow	6454T32	000000

Vehicle-Grade Antislip Protective Coatings

Designed for use in areas with heavy vehicular traffic, these coatings are highly resistant to wear. They contain grit to provide traction to your surface. Apply with a notched trowel, roller, or sprayer. The size listed is the combined total of the two parts. They cannot be sold to the regions listed because they exceed local regulatory limits on VOCs (volatile organic compounds).

Epoxy—Can

		Dry Time
Container Size, gal.	Solution Type	Touch, hr.	Overall, day	Approx. Coverage @ Thk.	Mixing Req.	Application Time After Mixing, hr.	Max. Temp., ° F	Application Temp. Range, ° F	Specs. Met	For Use Outdoors	For Use On	Cannot Be Sold To	Choose a Color		Each



	1	Solvent Based	12	3	40 ft² @ 2 mil	Yes	4	160	50 to 130	ADA Compliant, ASTM F609	Yes	Aluminum, Steel, Iron, Fiberglass, Concrete, Wood	Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA	Flat Black , Flat Dark Gray	7887T21	0000000

Epoxy—Pail

Coatings in a pail have a resin and a hardener in separate containers that can be mixed in the pail.

		Dry Time
Container Size, gal.	Solution Type	Touch, hr.	Overall, day	Approx. Coverage @ Thk.	Mixing Req.	Application Time After Mixing, hr.	Max. Temp., ° F	Application Temp. Range, ° F	Specs. Met	For Use Outdoors	For Use On	Cannot Be Sold To	Choose a Color		Each



	5	Solvent Based	12	3	200 ft² @ 2 mil	Yes	4	160	50 to 130	ADA Compliant, ASTM F609	Yes	Aluminum, Steel, Iron, Fiberglass, Concrete, Wood	Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA	Flat Black , Flat Dark Gray	7887T22	0000000

Antislip Floor Coating Additives

Consisting of small, spherical particles, add these to water- or solvent-based floor coatings to create a slip-resistant surface that’s easier to clean than sand-textured surfaces. Additives won’t change the coating’s color.

3.2 fl. oz. Container—Use 3.2 fl. oz. bottle with one gallon of floor coating.

16 fl. oz. Container—Use 16 fl. oz. bottle with five gallons of floor coating.

For Topcoat Composition	Container Size, fl. oz.	For Container Size, gal.		Each
Solvent Based, Water Based	3.2	1	2562N21	00000
Solvent Based, Water Based	16	5	2562N22	00000

Flexible Rubber Protective Coatings for Metal

These flexible, slip-resistant silicone coatings resist chemicals, block UV light, and encapsulate lead paint. They withstand temperatures up to 320° F. Apply with a brush, roller, or sprayer.

Silicone Rubber—Jug

		Dry Time
Container Size, gal.	Solution Type	Touch, min.	Overall, hr.	Approx. Coverage @ Thk.	Mixing Req.	Max. Temp., ° F	Application Temp. Range, ° F	For Use Outdoors	For Use On	Choose a Color		Each



	1	Solvent Based	60	24	100 ft² @ 10 mil	Yes	320	40 to 80	Yes	Steel, Iron, Composite, Wood	Semi-Gloss Light Gray , Semi-Gloss White	7825T2	0000000

Protective Coatings

Used to insulate, create grips, and color-code components, these coatings resist high temperatures, light abrasion, and corrosion.

Rubber—Aerosol Can

Rubber coatings withstand salt and acids.

Cannot Be Sold Outside United States—Coatings that cannot be sold outside of the United States do not meet product labeling requirements. VOC (Volatile Organic Compounds) regulations restrict sales to the listed jurisdictions/areas.

Sealant Primers—Although sealant primer is not required for use on all materials, it can be used to prepare any surface to maximize the life of the coating. They cannot be sold outside of the United States due to product regulations.

Topcoats—Apply topcoat to give coated surfaces a glossy finish that resists fading. They cannot be sold outside of the United States due to product regulations.

Coatings																Sealant Primers			Topcoats
		Dry Time												Each
Container Net Wt., oz.	Solution Type	Touch, min.	Overall, hr.	Approx. Coverage @ Thk.	Mixing Req.	Max. Temp., ° F	Application Temp. Range, ° F	For Use Outdoors	For Use On	Primer Req. for Use On	Cannot Be Sold To	Choose a Color		1-5	6-Up	Cannot Be Sold To		Each		Each



	11	Solvent Based	40	24	6 ft² @ 5 mil	No	200	65 to 85	Yes	Steel, Iron, Plastic, Wood, Fabric	Steel, Iron	Outside United States	Semi-Gloss Black , Semi-Gloss Clear , Semi-Gloss Red , Semi-Gloss White	9560T4	000000	000000	Outside United States	9560T82	000000	9560T2	000000

Rubber—Can

Rubber coatings withstand salt and acids.

Coatings in a can can be dipped, brushed, or sprayed.

Topcoats—Apply topcoat to give coated surfaces a glossy finish that resists fading. They cannot be sold outside of the United States due to product regulations.

Coatings															Sealant Primers			Topcoats
		Dry Time
Container Size	Solution Type	Touch, min.	Overall, hr.	Approx. Coverage @ Thk.	Mixing Req.	Max. Temp., ° F	Application Temp. Range, ° F	For Use Outdoors	For Use On	Primer Req. for Use On	Cannot Be Sold To	Choose a Color		Each	Cannot Be Sold To		Each		Each



	14.5 fl. oz.	Solvent Based	40	24	10 ft² @ 5 mil	No	200	65 to 85	Yes	Steel, Iron, Plastic, Wood, Fabric	Steel, Iron	Outside United States	Semi-Gloss Black , Semi-Gloss Blue , Semi-Gloss Red , Semi-Gloss Yellow	9560T7	000000	Outside United States	9560T82	000000	9560T2	000000


	1 gal.	Solvent Based	20	4	90 ft² @ 5 mil	No	200	50 to 90	Yes	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Galvanized Iron, Galvanized Steel, Fiberglass, Ceramic, Glass, Masonry, Concrete, Stone, Asphalt, Drywall, Wood	—	—	Semi-Gloss Black , Semi-Gloss Blue , Semi-Gloss Red , Semi-Gloss Yellow	9560T45	000000	—	———	0	9560T2	00000

Antislip Coating Paint Primers for Concrete Floors

Use these paint primers on concrete floors before antislip coatings to maximize longevity. They do not contain grit. Apply with a brush or roller. The size listed is the combined total of the two parts.

Solution Type	Approx. Coverage @ Thk.	Application Time After Mixing, hr.	Color		Each



96	Solvent Based	200 in² @ 2 mil	1	Amber	6198T35	0000000

Antislip Coating Paint Primers for Metal

Use these paint primers on your surface before antislip coatings to maximize longevity. They do not contain grit. Apply with a brush, roller, or sprayer. The size listed is the combined total of the two parts.

Cannot Be Sold To—They cannot be sold to the regions listed because they exceed local regulatory limits on VOCs (volatile organic compounds).

			Dry Time
	Container Size, gal.	Solution Type	Touch, min.	Overall, hr.	Approx. Coverage @ Thk.	Application Time After Mixing, hr.	Max. Temp., ° F	For Topcoat Composition	For Use On	Color	Cannot Be Sold To		Each
Can—Epoxy



		1	Solvent Based	60	12	270 ft² @ 4 mil	4	160	Solvent Based	Aluminum, Steel, Iron	Gray	Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA	6506T67	0000000