Made of SBR-coated polyester, these aprons repel water and other nonhazardous liquids. They have a tie in the back.

Rubber coatings keep oil, water, and other liquids from penetrating these aprons. They tie in the back.

Acrylic/Buna-N blend won’t crack in cold conditions. These aprons provide good abrasion resistance and have a soft polyester/cotton backing.

Buna-N coated cotton/polyester is durable, yet more flexible than Buna-N coated polyester. These aprons also withstand solvents.

Buna-N coated polyester is thicker than Buna-N coated cotton/polyester for added durability. In addition to resisting oil, these aprons withstand some solvents.

PVC-coated polyester withstands some exposure to diluted acids in addition to oil but is not recommended for use with chemicals. Aprons with a reinforced stomach have an extra layer of fabric over the stomach for added protection.

Neoprene-coated nylon aprons also resist fats, grease, and some solvents. With long sleeves, these aprons provide more coverage than other aprons so they're often used in transferring liquids and food processing. They have elastic cuffs to keep splashes out.

Made of Kevlar aramid, these aprons protect against incidental contact with hot surfaces. They have an adjustable strap at the neck and waist; each strap snaps onto the apron on one side, allowing for quick removal.

Keep workers clean and protected from spills and splashes on food processing lines while reducing the risk of contaminating the food. These aprons contain metal and chemical additives that will set off metal detectors and show up on X-ray machines if they—or any piece of them—fall into your line. They’re also bright blue, making them easy to spot. Use these aprons to help you comply with Hazard Analysis and Critical Control Point (HACCP) programs for food safety.

Made of thermoplastic polyurethane (TPU), these aprons repel water, chemicals, and oil, including vegetable oil and animal fats. They also resist tears and abrasion, and will remain flexible in low temperatures. They can be machine washed and reused multiple times.

Sleeved aprons provide better coverage than bib aprons, so they’re often used in applications with higher risk of splashes.

Made of 99% polyester and 1% carbon fiber, these coats repel liquids. These knee-length coats are also known as barrier coats. They have knit cuffs to keep liquid from splashing into sleeves.

When measuring chest size, measure around the fullest part of your chest. Take all measurements over clothing you expect to wear under the coat.

Protect the front of your body from dirt, grime, and other materials. These aprons tie in the back.

Polypropylene offers economical protection in environments where liquid splashes and abrasion resistance are not a concern.

Polyolefin provides excellent resistance against acids and chemical splashes. It is abrasion resistant and holds up to occasional contact with nonhazardous liquids, such as water and paint spray.

Polyethylene is made of FDA listed materials, so it’s often used in food preparation. It holds up to occasional contact with nonhazardous liquids. Some polyethylene aprons are metal detectable—they have a metal additive that sets off metal detectors if a piece of the apron falls into your line. They’re also blue, so it’s easy to find and remove the piece. They help you comply with Hazard Analysis and Critical Control Point (HACCP) programs to keep contaminated food from leaving your facility.

Tyvek polyethylene provides better tear and abrasion resistance than polypropylene, polyolefin, and polyethylene. It holds up to occasional contact with nonhazardous liquids, such as water and paint spray. It is made of heat- and pressure-bonded fibers for a material that’s soft yet strong.

Comformax/polyester blend is a specially treated wood pulp and fabric blend material that repels liquids, including blood and other bodily fluids. It has good tear resistance and offers some breathability.

Protect your torso and thighs when welding.

Cotton is treated to protect against low radiant heat and minor sparks. These aprons tie in the back.

Leather protects against radiant heat, flames, and welding sparks. It’s flexible and resists cuts and abrasion better than cotton. These aprons tie in the back.

Carbon/aramid blend protects against radiant heat, flames, and welding sparks, while providing better breathability than leather. It is stitched with Nomex threads for added durability. These aprons have an adjustable waist strap with a buckle for a quick release.

These aprons extend to the ankles and wrap around each leg, providing better coverage and allowing for better mobility than other aprons.

Cotton is treated to protect against low radiant heat and minor sparks. It’s lightweight and breathable to keep you cool. These aprons have a tie on the neck, waist, and on each leg.

Leather protects against radiant heat, flames, and welding sparks. It’s flexible and resists cuts and abrasion better than cotton. These aprons have adjustable neck, waist, and leg straps. A buckle on the waist and leg straps allows for a quick release. Aprons have two chest pockets.

Cover your waist and the top of your legs when welding. Made of leather, these aprons protect against radiant heat, flames, and welding sparks. They’re flexible and resist cuts and abrasion.

Designed to meet clean room standards, these aprons prevent pollutants from contaminating the space. Aprons resist spills and splashes from acids, alkalies, and other chemicals. They have sleeves with elastic cuffs to help keep liquids from splashing in. They are disposable.

Often used in steel mills and glass plants, aluminized clothing reflects radiant heat and protects against sparks and splashes. These aprons have no pockets so they won’t trap hot particles. They have adjustable neck and waist straps to modify the fit. The straps snap on and off so you can remove them quickly.

Rayon provides good radiant-heat protection as well as moderate spark protection.

Kevlar aramid/fiberglass blend combines good heat resistance with excellent abrasion and cut resistance.

PBI/Kevlar aramid blend is lighter than other Kevlar blends. It provides excellent heat and abrasion resistance without weighing you down.

Carbon/Kevlar aramid blend is a heavyweight fabric that lasts longer than other Kevlar blends. It holds up in higher temperatures than other materials while providing excellent abrasion and cut resistance.

Rated ANSI level A9, these aprons meet the highest standards for cut resistance. They provide cut and puncture protection against sharp, heavy materials such as metal, glass, wood, and wire. They’re made with two layers of polyester for strong, durable protection that won't weigh you down. They have adjustable neck and waist straps with a buckle in the back.

Style M and Style P have a magnetic panel on the front that can hold bits and fasteners for easy access.

Style R comes with a belt that fits waist sizes 26"-52".