Abrasive Material Abrasive Material |
---|
|
For Finish For Finish |
---|
|
Individual/Set Individual/Set |
---|
|
Lubrication Lubrication |
---|
|
Container Type Container Type |
---|
|
More
Maintain tools, molds, and dies. These stones can be used by hand or in power tools with a compatible holder. Choose the shape that best matches the contour of your work surface.
Novaculite stones have extremely fine grains that cut very slowly for the most control over finishing. Also known as Arkansas stones. Grit is approximate. We recommend using a water-soluble or oil-based lubricant.
Stones | Hand-Held Stone Holders | ||||||||
---|---|---|---|---|---|---|---|---|---|
Grit (For Finish) | Lg. | Wd. | Thick. | Color | Lubrication | Each | Each | ||
Novaculite—For Use On Steel | |||||||||
800 (Polished) | 4" | 1/4" | 1/4" | Gray | Recommended | 0000000 | 000000 | 00000000 | 00000 |
800 (Polished) | 4" | 3/8" | 3/8" | Gray | Recommended | 0000000 | 00000 | 000000 | 00 |
800 (Polished) | 4" | 1/2" | 1/2" | Gray | Recommended | 0000000 | 00000 | 000000 | 00 |
800 (Polished) | 6" | 3/8" | 3/8" | Gray | Recommended | 0000000 | 00000 | 000000 | 00 |
800 (Polished) | 6" | 1/2" | 1/2" | Gray | Recommended | 0000000 | 00000 | 000000 | 00 |
Grit (For Finish) | Lg. | Wd. | Color | Lubrication | Each | |
Novaculite—For Use On Steel | ||||||
---|---|---|---|---|---|---|
800 (Polished) | 4" | 1/4" | Gray | Recommended | 0000000 | 000000 |
800 (Polished) | 4" | 3/8" | Gray | Recommended | 0000000 | 00000 |
800 (Polished) | 4" | 1/2" | Gray | Recommended | 0000000 | 00000 |
800 (Polished) | 6" | 3/8" | Gray | Recommended | 0000000 | 00000 |
800 (Polished) | 6" | 1/2" | Gray | Recommended | 0000000 | 00000 |
Grit (For Finish) | Lg. | Wd. | Thick. | Color | Lubrication | Each | |
Novaculite—For Use On Steel | |||||||
---|---|---|---|---|---|---|---|
800 (Polished) | 4" | 1/2" | 3/16" | Gray | Recommended | 0000000 | 000000 |
Grit (For Finish) | Lg. | Wd. | Thick. | Color | Lubrication | Each | |
Novaculite—For Use On Steel | |||||||
---|---|---|---|---|---|---|---|
800 (Polished) | 4" | 1/2" | 3/16" | Gray | Recommended | 0000000 | 000000 |
Grit (For Finish) | Lg. | Wd. | Thick. | Color | Lubrication | Each | |
Novaculite—For Use On Steel | |||||||
---|---|---|---|---|---|---|---|
800 (Polished) | 4" | 1/2" | 3/16" | Gray | Recommended | 0000000 | 000000 |
Grit (For Finish) | Lg. | Wd. | Thick. | Color | Lubrication | Each | |
Novaculite—For Use On Steel | |||||||
---|---|---|---|---|---|---|---|
800 (Polished) | 4" | 1/2" | 3/16" | Gray | Recommended | 0000000 | 000000 |
Grit (For Finish) | Lg. | Wd. | Thick. | Color | Lubrication | Each | |
Novaculite—For Use On Steel | |||||||
---|---|---|---|---|---|---|---|
800 (Polished) | 3" | 1" | 1/8"-1/4" | Gray | Recommended | 0000000 | 000000 |
Grit (For Finish) | Lg. | Dia. | Color | Lubrication | Each | |
Novaculite—For Use On Steel | ||||||
---|---|---|---|---|---|---|
800 (Polished) | 3" | 1/32"-5/16" | Gray | Recommended | 0000000 | 000000 |
Maintain tools, molds, and dies. These stones can be used by hand or in power tools with a compatible holder. Choose the shape that best matches the contour of your work surface. We recommend using a water-soluble or oil-based lubricant.
Novaculite stones have extremely fine grains that cut very slowly for the most control over finishing. Also known as Arkansas stones. Grit is approximate.
No. of Pieces | Lg. | Includes | Stone Style | Grit (For Finish) | Color | Container Type | Each | |
Novaculite—For Use On Steel | ||||||||
---|---|---|---|---|---|---|---|---|
4 | 4" | One Square Stone—1/4" Wd. × 1/4" Thick. One Triangular Stone—1/4" Wd. One Round Stone—1/4" Dia. One Knife Stone—29/32" Wd. × 1/8"-1/4" Thick. | Straight | 900 (Polished) | Off-White | Box | 0000000 | 000000 |
4 | 6" | One Square Stone—3/8" Wd. × 3/8" Thick. One Triangular Stone—3/8" Wd. One Round Stone—3/8" Dia. One Knife Stone—29/32" Wd. × 1/8"-3/8" Thick. | Straight | 900 (Polished) | Off-White | Box | 0000000 | 00000 |
Quickly sharpen straight-blade tools.
Novaculite has extremely fine grains that cut very slowly for the most control over sharpening. Also known as Arkansas stones.
For stones that require lubrication, we recommend using a water-soluble or oil-based lubricant..
A different grit on each side enables two-step sharpening with one stone. First sharpen your blade with a lower grit, then sharpen again with a finer (higher) grit until the desired edge is achieved.
Aluminum oxide cuts more slowly than silicon carbide for finer control. Also known as India stones.
Novaculite has extremely fine grains that cut very slowly for the most control over sharpening. Also known as Arkansas stones.
For stones that require lubrication, we recommend using a water-soluble or oil-based lubricant.
Stone | ||||||
---|---|---|---|---|---|---|
Lg. | Wd. | Thick. | Grit (For Finish) | Lubrication | Each | |
Aluminum Oxide × Novaculite | ||||||
6" | 2" | 1" | 100 (Smooth) × 600 (Polished) | Oil Filled × Required | 0000000 | 000000 |
Novaculite × Novaculite | ||||||
4" | 2" | 1/2" | 400 (Extra Smooth) × 800 (Polished) | Required × Required | 0000000 | 00000 |
6" | 2" | 1/2" | 400 (Extra Smooth) × 800 (Polished) | Required × Required | 0000000 | 00000 |
8" | 2" | 1/2" | 400 (Extra Smooth) × 800 (Polished) | Required × Required | 0000000 | 00000 |
10" | 2" | 1/2" | 400 (Extra Smooth) × 800 (Polished) | Required × Required | 0000000 | 00000 |
These stones have extremely fine grains that cut very slowly for the most control over sharpening. Also known as Arkansas stones.
No. of Pieces | Lubrication | Includes | Each | |
Rectangular | ||||
---|---|---|---|---|
4 | Required | Polished-Finish (600 Grit) Pink Novaculite Stone for Straight Blades—4" Lg. × 1 5/8" Wd. × 1/2" Thick. Polished-Finish (800 Grit) Gray Novaculite Stone for Straight Blades—3" Lg. × 1" Wd. × 1/4" Thick. 3 oz. Oil 23° Angle Guide | 0000000 | 000000 |
Three separate grit surfaces enables multistep sharpening with one stone. First sharpen your blade with a lower grit, then sharpen again with progressively finer (higher) grits until the desired edge is achieved.
Stone | |||||||
---|---|---|---|---|---|---|---|
Lg. | Wd. | Thick. | Grit (For Finish) | Lubrication | Includes | Each | |
Rectangular | |||||||
Silicon Carbide × Novaculite × Novaculite | |||||||
6" | 1 5/8" | 1/2" | 150 (Smooth) × 600 (Smooth) × 800 (Extra Smooth) | Required × Required × Required | 1 oz. Oil | 0000000 | 000000 |
Diamond is extremely hard and long lasting. No lubricants needed—use these stones dry or with water. Rinse with water to clean.
No. of Pieces | Lubrication | Includes | Each | |
Rectangular | ||||
---|---|---|---|---|
4 | Not Required | Smooth-Finish (220 Grit) Diamond Stone for Straight Blades—3 3/8" Diamond Surface Lg. × 7/8" Diamond Surface Wd. × 4 1/4" O'all Lg. Extra-Smooth-Finish (325 Grit) Diamond Stone for Straight Blades—3 3/8" Diamond Surface Lg. × 7/8" Diamond Surface Wd. × 4 1/4" O'all Lg. Polished-Finish (600 Grit) Diamond Stone for Straight Blades—3 3/8" Diamond Surface Lg. × 7/8" Diamond Surface Wd. × 4 1/4" O'all Lg. Polished-Finish (1200 Grit) Diamond Stone for Straight Blades—3 3/8" Diamond Surface Lg. × 7/8" Diamond Surface Wd. × 4 1/4" O'all Lg. | 0000000 | 000000 |
Diamond is extremely hard and long lasting. No lubricants needed—use these stones dry or with water. Rinse with water to clean.
No. of Pieces | Lubrication | Includes | Handle Material | Each | |
Rectangular | |||||
---|---|---|---|---|---|
6 | Not Required | 4" Lg. Coarse Diamond Stone (325 Grit) for Straight Blades 4" Lg. Fine Diamond Stone (600 Grit) for Straight Blades 4" Lg. Fine Diamond Stone (600 Grit) for Serrated Blades 4" Lg. Extra-Fine Diamond Stone (1200 Grit) for Straight Blades Adjustable-Angle Guide Blade Holder | Plastic | 0000000 | 000000 |
For holes up to 1/4", these laps include an expander tool to increase the size to fit a slightly larger ID. Use them with lapping paste to precisely size or polish the inside of the hole.
No. of Pieces | Includes | Material | Each | |
For Open-End Holes | ||||
---|---|---|---|---|
18 | Lap for 0.032" ID—2 1/2" O'all Lg. × 3/8" Barrel Lg. Lap for 0.036" ID—2 1/2" O'all Lg. × 3/8" Barrel Lg. Lap for 0.04" ID—2 1/2" O'all Lg. × 3/8" Barrel Lg. Lap for 0.046" ID—2 1/2" O'all Lg. × 3/8" Barrel Lg. Lap for 0.054" ID—2 1/2" O'all Lg. × 3/8" Barrel Lg. Lap for 0.062" ID—3" O'all Lg. × 1/2" Barrel Lg. Lap for 0.07" ID—3" O'all Lg. × 1/2" Barrel Lg. Lap for 0.079" ID—3" O'all Lg. × 1/2" Barrel Lg. Lap for 0.09" ID—3" O'all Lg. × 1/2" Barrel Lg. Lap for 0.104" ID—3 1/4" O'all Lg. × 5/8" Barrel Lg. Lap for 0.12" ID—3 7/8" O'all Lg. × 7/8" Barrel Lg. Lap for 0.135" ID—3 1/4" O'all Lg. × 3/4" Barrel Lg. Lap for 0.155" ID—3 1/4" O'all Lg. × 1" Barrel Lg. Lap for 0.17" ID—4 1/4" O'all Lg. × 1" Barrel Lg. Lap for 0.187" ID—4" O'all Lg. × 7/8" Barrel Lg. Lap for 0.218" ID—4 1/8" O'all Lg. × 1 1/4" Barrel Lg. Lap for 0.25" ID—4" O'all Lg. × 1 1/2" Barrel Lg. Expander Tool | Steel | 0000000 | 000000 |
For holes up to 1/4", these laps include an expander tool to increase the size to fit a slightly larger ID. Use them with lapping paste to precisely size or polish the inside of the hole.
For ID | Overall Lg. | Barrel Lg. | Material | Includes | Pkg. Qty. | Pkg. | |
For Open-End Holes | |||||||
---|---|---|---|---|---|---|---|
0.032" | 2 1/2" | 3/8" | Steel | Expander Tool | 12 | 0000000 | 00000 |
0.036" | 2 1/2" | 3/8" | Steel | Expander Tool | 12 | 0000000 | 0000 |
0.04" | 2 1/2" | 3/8" | Steel | Expander Tool | 12 | 0000000 | 0000 |
0.046" | 2 1/2" | 3/8" | Steel | Expander Tool | 12 | 0000000 | 0000 |
0.054" | 2 1/2" | 3/8" | Steel | Expander Tool | 12 | 0000000 | 0000 |
0.062" | 3" | 1/2" | Steel | Expander Tool | 12 | 0000000 | 0000 |
0.07" | 3" | 1/2" | Steel | Expander Tool | 12 | 0000000 | 0000 |
0.079" | 3" | 1/2" | Steel | Expander Tool | 12 | 0000000 | 0000 |
0.09" | 3" | 1/2" | Steel | Expander Tool | 12 | 0000000 | 00000 |
0.104" | 3 1/4" | 5/8" | Steel | Expander Tool | 12 | 0000000 | 00000 |
0.12" | 3 7/8" | 7/8" | Steel | Expander Tool | 12 | 0000000 | 00000 |
0.135" | 3 1/4" | 3/4" | Steel | Expander Tool | 12 | 0000000 | 00000 |
0.155" | 3 1/4" | 1" | Steel | Expander Tool | 12 | 0000000 | 00000 |
0.17" | 4 1/4" | 1" | Steel | Expander Tool | 12 | 0000000 | 00000 |
0.187" | 4" | 7/8" | Steel | Expander Tool | 12 | 0000000 | 00000 |
0.218" | 4 1/8" | 1 1/4" | Steel | Expander Tool | 12 | 0000000 | 00000 |
0.25" | 4" | 1 1/2" | Steel | Expander Tool | 12 | 0000000 | 00000 |