Color Color |
|---|
 | Black |
 | Black/Fluorescent Green |
 | Blue |
 | Fluorescent Green |
 | Fluorescent Pink |
 | Fluorescent Red |
 | Fluorescent Yellow |
 | Green |
 | Orange |
| Red |
 | White |
 | Yellow |
System of Measurement System of Measurement |
|---|
|
Mount Type Mount Type |
|---|
 |  |
| Adhesive | Wraparound |
Visibility Visibility |
|---|
|
Message Type Message Type |
|---|
 |  |
| Blank | Identification |
For Surface Texture For Surface Texture |
|---|
|
Flow-Direction Arrow Flow-Direction Arrow |
|---|
|
Message Contains Message Contains |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
Specifications Met Specifications Met |
|---|
|
About Selecting Pipe Markers
More
Floor Marking Arrows
Glow-in-the-Dark Floor Marking Arrow Tape
Direct traffic and identify safety zones in the dark for up to six hours.
| Wd. | Thick. | For Use Outdoors | For Surface Texture | Material | Color | Each | |
15 ft. | |||||||
|---|---|---|---|---|---|---|---|
| 2" | 0.01" | Yes | Smooth | Polyester | Black/Fluorescent Green | 00000000 | 000000 |
| 3" | 0.01" | Yes | Smooth | Polyester | Black/Fluorescent Green | 00000000 | 00000 |
30 ft. | |||||||
| 2" | 0.01" | Yes | Smooth | Polyester | Black/Fluorescent Green | 00000000 | 00000 |
| 3" | 0.01" | Yes | Smooth | Polyester | Black/Fluorescent Green | 00000000 | 00000 |
Choose-a-Color Arrow Labels
Point to small areas on equipment such as circuit boards. These labels can be used for color coding.
| Ht. | Wd. | Thick. | Mount Type | Material | Choose a Color | Pkg. Qty. | Pkg. | |
Paper | ||||||||
|---|---|---|---|---|---|---|---|---|
| 1/8" | 3/16" | 0.006" | Adhesive Back | Paper | 1,000 | 00000000 | 00000 | |
| 3/16" | 1/4" | 0.006" | Adhesive Back | Paper | 1,000 | 00000000 | 0000 | |
| 1/4" | 3/8" | 0.006" | Adhesive Back | Paper | 1,000 | 00000000 | 0000 | |
| 5/16" | 3/4" | 0.006" | Adhesive Back | Paper | 1,000 | 00000000 | 0000 | |
Vinyl Plastic | ||||||||
| 1/8" | 3/16" | 0.005" | Adhesive Back | Vinyl Plastic | 1,000 | 00000000 | 0000 | |
| 3/16" | 1/4" | 0.005" | Adhesive Back | Vinyl Plastic | 1,000 | 00000000 | 0000 | |
| 1/4" | 3/8" | 0.005" | Adhesive Back | Vinyl Plastic | 1,000 | 00000000 | 0000 | |
| 5/16" | 3/4" | 0.005" | Adhesive Back | Vinyl Plastic | 1,000 | 00000000 | 0000 | |
Adhesive-Back Pipe Markers
Apply directly onto clean, dry pipes for clear identification of contents.
ANSI/ASME 13.1 requires that, for a given pipe OD, markers have a minimum character height, identify contents with a message, indicate flow direction with an arrow, and designate hazard classifications with a specific marker color. For messages with multiple marker color options, choose the color that best identifies the hazardous properties of the contents according to the ANSI/ASME designations.
Style D have arrows that repeat continuously so you can wrap them all the way around the pipe.
Roll | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | For Pipe OD | Ht. | Wd. | Thick. | Lg., ft. | ID | Flow-Direction Arrow | Material | Temp. Range, °F | Pkg. Qty. | Pkg. | |
Arrow Blue with White Message | ||||||||||||
| D | 3/4"-18" | __ | 2" | 0.004" | 30 | 3" | Yes | Vinyl Plastic | -40° to 170° | 1 | 000000000 | 000000 |
| D | 3/4"-18" | __ | 2" | 0.004" | 54 | 3" | Yes | Vinyl Plastic | -40° to 170° | 1 | 000000000 | 00000 |
| D | 3/4"-18" | __ | 2" | 0.004" | 90 | 3" | Yes | Vinyl Plastic | -40° to 170° | 1 | 00000000 | 00000 |
| E | 3/4"-2" | 1 1/8" | 7" | 0.004" | __ | __ | Yes | Vinyl Plastic | -40° to 170° | 20 | 000000000 | 00000 |
| E | 2 1/4"-6" | 2 1/4" | 7" | 0.004" | __ | __ | Yes | Vinyl Plastic | -40° to 170° | 10 | 000000000 | 00000 |
Arrow Green with White Message | ||||||||||||
| D | 3/4"-18" | __ | 2" | 0.004" | 30 | 3" | Yes | Vinyl Plastic | -40° to 170° | 1 | 000000000 | 00000 |
| D | 3/4"-18" | __ | 2" | 0.004" | 54 | 3" | Yes | Vinyl Plastic | -40° to 170° | 1 | 000000000 | 00000 |
| D | 3/4"-18" | __ | 2" | 0.004" | 90 | 3" | Yes | Vinyl Plastic | -40° to 170° | 1 | 00000000 | 00000 |
| E | 3/4"-2" | 1 1/8" | 7" | 0.004" | __ | __ | Yes | Vinyl Plastic | -40° to 170° | 20 | 000000000 | 00000 |
| E | 2 1/4"-6" | 2 1/4" | 7" | 0.004" | __ | __ | Yes | Vinyl Plastic | -40° to 170° | 10 | 000000000 | 00000 |
Arrow Red with White Message | ||||||||||||
| D | 3/4"-18" | __ | 2" | 0.004" | 30 | 3" | Yes | Vinyl Plastic | -40° to 170° | 1 | 000000000 | 00000 |
| D | 3/4"-18" | __ | 2" | 0.004" | 54 | 3" | Yes | Vinyl Plastic | -40° to 170° | 1 | 000000000 | 00000 |
| D | 3/4"-18" | __ | 2" | 0.004" | 90 | 3" | Yes | Vinyl Plastic | -40° to 170° | 1 | 00000000 | 00000 |
| E | 3/4"-2" | 1 1/8" | 7" | 0.004" | __ | __ | Yes | Vinyl Plastic | -40° to 170° | 20 | 000000000 | 00000 |
| E | 2 1/4"-6" | 2 1/4" | 7" | 0.004" | __ | __ | Yes | Vinyl Plastic | -40° to 170° | 10 | 000000000 | 00000 |
Arrow Yellow with Black Message | ||||||||||||
| D | 3/4"-18" | __ | 2" | 0.004" | 30 | 3" | Yes | Vinyl Plastic | -40° to 170° | 1 | 000000000 | 00000 |
| D | 3/4"-18" | __ | 2" | 0.004" | 54 | 3" | Yes | Vinyl Plastic | -40° to 170° | 1 | 000000000 | 00000 |
| D | 3/4"-18" | __ | 2" | 0.004" | 90 | 3" | Yes | Vinyl Plastic | -40° to 170° | 1 | 00000000 | 00000 |
| E | 3/4"-2" | 1 1/8" | 7" | 0.004" | __ | __ | Yes | Vinyl Plastic | -40° to 170° | 20 | 000000000 | 00000 |
| E | 2 1/4"-6" | 2 1/4" | 7" | 0.004" | __ | __ | Yes | Vinyl Plastic | -40° to 170° | 10 | 000000000 | 00000 |
Write-On Adhesive-Back Pipe Markers
Use a permanent marker to label the contents of a pipe. Apply directly onto clean, dry pipes.
ANSI/ASME 13.1 requires that, for a given pipe OD, markers have a minimum character height, identify contents with a message, indicate flow direction with an arrow, and designate hazard classifications with a specific marker color. For messages with multiple marker color options, choose the color that best identifies the hazardous properties of the contents according to the ANSI/ASME designations. Pair blank markers with adhesive-back arrow pipe markers to help meet ANSI/ASME standards.
Rectangle markers with a flow-direction arrow are perforated so you can turn the arrow to match your system's flow direction.
| Message Contains | Message Color | For Pipe OD | Shape | Ht. | Wd. | Thick. | Material | Temp. Range, °F | Specifications Met | Pkg. Qty. | Pkg. | |
Blue | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Symbols | White | 1/4"-3/4" | Square | 3" | 3" | 0.003" | Vinyl Plastic | -40° to 170° | __ | 5 | 000000000 | 00000 |
| Symbols | White | 3/4"-2" | Rectangle | 1" | 8" | 0.005" | Vinyl Plastic | 32° to 140° | ANSI/ASME 13.1 | 10 | 000000000 | 0000 |
| Symbols | White | 2 1/4"-7 7/8" | Rectangle | 2" | 12" | 0.005" | Vinyl Plastic | 32° to 140° | ANSI/ASME 13.1 | 10 | 000000000 | 0000 |
Green | ||||||||||||
| Symbols | White | 1/4"-3/4" | Square | 3" | 3" | 0.003" | Vinyl Plastic | -40° to 170° | __ | 5 | 000000000 | 0000 |
| Symbols | White | 3/4"-2" | Rectangle | 1" | 8" | 0.005" | Vinyl Plastic | 32° to 140° | ANSI/ASME 13.1 | 10 | 000000000 | 0000 |
| Symbols | White | 2 1/4"-7 7/8" | Rectangle | 2" | 12" | 0.005" | Vinyl Plastic | 32° to 140° | ANSI/ASME 13.1 | 10 | 000000000 | 0000 |
Orange | ||||||||||||
| Symbols | Black | 1/4"-3/4" | Square | 3" | 3" | 0.003" | Vinyl Plastic | -40° to 170° | __ | 5 | 000000000 | 0000 |
| Symbols | Black | 3/4"-2" | Rectangle | 1" | 8" | 0.005" | Vinyl Plastic | 32° to 140° | ANSI/ASME 13.1 | 10 | 000000000 | 0000 |
| Symbols | Black | 2 1/4"-7 7/8" | Rectangle | 2" | 12" | 0.005" | Vinyl Plastic | 32° to 140° | ANSI/ASME 13.1 | 10 | 000000000 | 0000 |
Red | ||||||||||||
| Symbols | White | 1/4"-3/4" | Square | 3" | 3" | 0.003" | Vinyl Plastic | -40° to 170° | __ | 5 | 000000000 | 0000 |
| Symbols | White | 3/4"-2" | Rectangle | 1" | 8" | 0.005" | Vinyl Plastic | 32° to 140° | ANSI/ASME 13.1 | 10 | 000000000 | 0000 |
| Symbols | White | 2 1/4"-7 7/8" | Rectangle | 2" | 12" | 0.005" | Vinyl Plastic | 32° to 140° | ANSI/ASME 13.1 | 10 | 000000000 | 0000 |
Yellow | ||||||||||||
| Symbols | Black | 1/4"-3/4" | Square | 3" | 3" | 0.003" | Vinyl Plastic | -40° to 170° | __ | 5 | 000000000 | 0000 |
| Symbols | Black | 3/4"-2" | Rectangle | 1" | 8" | 0.005" | Vinyl Plastic | 32° to 140° | ANSI/ASME 13.1 | 10 | 000000000 | 0000 |
| Symbols | Black | 2 1/4"-7 7/8" | Rectangle | 2" | 12" | 0.005" | Vinyl Plastic | 32° to 140° | ANSI/ASME 13.1 | 10 | 000000000 | 0000 |
Write-On Washdown Pipe Markers
Use a permanent marker to label the contents of a pipe. These fade-resistant pipe markers withstand detergents used in high-pressure cleaning. Wrap them around a pipe and seal in place with the adhesive strip.
ANSI/ASME 13.1 requires that, for a given pipe OD, markers have a minimum character height, identify contents with a message, indicate flow direction with an arrow, and designate hazard classifications with a specific marker color. For messages with multiple marker color options, choose the color that best identifies the hazardous properties of the contents according to the ANSI/ASME designations.
| Message Contains | Message Color | For Pipe OD | Ht. | Wd. | Thick. | Flow-Direction Arrow | Material | Temp. Range, °F | Includes | Specifications Met | Each | |
Blue | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Symbols | White | 5/8"-1" | 5" | 8" | 0.007" | Yes | Polyester Plastic | -40° to 250° | Adhesive Strip | ANSI/ASME 13.1 | 00000000 | 00000 |
| Symbols | White | 1 1/8"-2 1/2" | 9" | 8" | 0.007" | Yes | Polyester Plastic | -40° to 250° | Adhesive Strip | ANSI/ASME 13.1 | 00000000 | 00000 |
| Symbols | White | 2 1/2"-4 3/4" | 17" | 12" | 0.007" | Yes | Polyester Plastic | -40° to 250° | Adhesive Strip | ANSI/ASME 13.1 | 00000000 | 00000 |
| Symbols | White | 5"-7 7/8" | 26" | 12" | 0.007" | Yes | Polyester Plastic | -40° to 250° | Adhesive Strip | ANSI/ASME 13.1 | 00000000 | 00000 |
Green | ||||||||||||
| Symbols | White | 5/8"-1" | 5" | 8" | 0.007" | Yes | Polyester Plastic | -40° to 250° | Adhesive Strip | ANSI/ASME 13.1 | 00000000 | 0000 |
| Symbols | White | 1 1/8"-2 1/2" | 9" | 8" | 0.007" | Yes | Polyester Plastic | -40° to 250° | Adhesive Strip | ANSI/ASME 13.1 | 00000000 | 00000 |
| Symbols | White | 2 1/2"-4 3/4" | 17" | 12" | 0.007" | Yes | Polyester Plastic | -40° to 250° | Adhesive Strip | ANSI/ASME 13.1 | 00000000 | 00000 |
| Symbols | White | 5"-7 7/8" | 26" | 12" | 0.007" | Yes | Polyester Plastic | -40° to 250° | Adhesive Strip | ANSI/ASME 13.1 | 00000000 | 00000 |
Orange | ||||||||||||
| Symbols | Black | 5/8"-1" | 5" | 8" | 0.007" | Yes | Polyester Plastic | -40° to 250° | Adhesive Strip | ANSI/ASME 13.1 | 00000000 | 0000 |
| Symbols | Black | 1 1/8"-2 1/2" | 9" | 8" | 0.007" | Yes | Polyester Plastic | -40° to 250° | Adhesive Strip | ANSI/ASME 13.1 | 00000000 | 00000 |
| Symbols | Black | 2 1/2"-4 3/4" | 17" | 12" | 0.007" | Yes | Polyester Plastic | -40° to 250° | Adhesive Strip | ANSI/ASME 13.1 | 00000000 | 00000 |
| Symbols | Black | 5"-7 7/8" | 26" | 12" | 0.007" | Yes | Polyester Plastic | -40° to 250° | Adhesive Strip | ANSI/ASME 13.1 | 00000000 | 00000 |
Red | ||||||||||||
| Symbols | White | 5/8"-1" | 5" | 8" | 0.007" | Yes | Polyester Plastic | -40° to 250° | Adhesive Strip | ANSI/ASME 13.1 | 00000000 | 0000 |
| Symbols | White | 1 1/8"-2 1/2" | 9" | 8" | 0.007" | Yes | Polyester Plastic | -40° to 250° | Adhesive Strip | ANSI/ASME 13.1 | 00000000 | 00000 |
| Symbols | White | 2 1/2"-4 3/4" | 17" | 12" | 0.007" | Yes | Polyester Plastic | -40° to 250° | Adhesive Strip | ANSI/ASME 13.1 | 00000000 | 00000 |
| Symbols | White | 5"-7 7/8" | 26" | 12" | 0.007" | Yes | Polyester Plastic | -40° to 250° | Adhesive Strip | ANSI/ASME 13.1 | 00000000 | 00000 |
Yellow | ||||||||||||
| Symbols | Black | 5/8"-1" | 5" | 8" | 0.007" | Yes | Polyester Plastic | -40° to 250° | Adhesive Strip | ANSI/ASME 13.1 | 00000000 | 0000 |
| Symbols | Black | 1 1/8"-2 1/2" | 9" | 8" | 0.007" | Yes | Polyester Plastic | -40° to 250° | Adhesive Strip | ANSI/ASME 13.1 | 00000000 | 00000 |
| Symbols | Black | 2 1/2"-4 3/4" | 17" | 12" | 0.007" | Yes | Polyester Plastic | -40° to 250° | Adhesive Strip | ANSI/ASME 13.1 | 00000000 | 00000 |
| Symbols | Black | 5"-7 7/8" | 26" | 12" | 0.007" | Yes | Polyester Plastic | -40° to 250° | Adhesive Strip | ANSI/ASME 13.1 | 00000000 | 00000 |
Write-On Reflective Pipe Markers
Use a permanent marker to label the contents of a pipe. They are reflective so they improve visibility in low-light conditions. Apply these adhesive-back markers directly onto clean, dry pipes. They have a removable arrow; apply the message to a pipe and then turn the arrow to match your system’s flow direction.
ANSI/ASME 13.1 requires that, for a given pipe OD, markers have a minimum character height, identify contents with a message, indicate flow direction with an arrow, and designate hazard classifications with a specific marker color. For messages with multiple marker color options, choose the color that best identifies the hazardous properties of the contents according to the ANSI/ASME designations.
| Message Contains | Message Color | For Pipe OD | Ht. | Wd. | Thick. | Flow-Direction Arrow | Material | Temp. Range, °F | Specifications Met | Pkg. Qty. | Pkg. | |
Blue | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Symbols | White | 3/4"-2" | 1" | 8" | 0.007" | Yes | Vinyl Plastic | -70° to 160° | ANSI/ASME 13.1 | 10 | 00000000 | 000000 |
| Symbols | White | 2 1/4"-7 7/8" | 2" | 12" | 0.007" | Yes | Vinyl Plastic | -70° to 160° | ANSI/ASME 13.1 | 10 | 00000000 | 00000 |
Green | ||||||||||||
| Symbols | White | 3/4"-2" | 1" | 8" | 0.007" | Yes | Vinyl Plastic | -70° to 160° | ANSI/ASME 13.1 | 10 | 00000000 | 00000 |
| Symbols | White | 2 1/4"-7 7/8" | 2" | 12" | 0.007" | Yes | Vinyl Plastic | -70° to 160° | ANSI/ASME 13.1 | 10 | 00000000 | 00000 |
Orange | ||||||||||||
| Symbols | Black | 3/4"-2" | 1" | 8" | 0.007" | Yes | Vinyl Plastic | -70° to 160° | ANSI/ASME 13.1 | 10 | 00000000 | 00000 |
| Symbols | Black | 2 1/4"-7 7/8" | 2" | 12" | 0.007" | Yes | Vinyl Plastic | -70° to 160° | ANSI/ASME 13.1 | 10 | 00000000 | 00000 |
Red | ||||||||||||
| Symbols | White | 3/4"-2" | 1" | 8" | 0.007" | Yes | Vinyl Plastic | -70° to 160° | ANSI/ASME 13.1 | 10 | 00000000 | 00000 |
| Symbols | White | 2 1/4"-7 7/8" | 2" | 12" | 0.007" | Yes | Vinyl Plastic | -70° to 160° | ANSI/ASME 13.1 | 10 | 00000000 | 00000 |
Yellow | ||||||||||||
| Symbols | Black | 3/4"-2" | 1" | 8" | 0.007" | Yes | Vinyl Plastic | -70° to 160° | ANSI/ASME 13.1 | 10 | 00000000 | 00000 |
| Symbols | Black | 2 1/4"-7 7/8" | 2" | 12" | 0.007" | Yes | Vinyl Plastic | -70° to 160° | ANSI/ASME 13.1 | 10 | 00000000 | 00000 |