Ultraviolet light won’t cause this tubing to degrade or deteriorate.

Designed for high-purity applications, this hard tubing is cleaned and bagged to prevent dirt and moisture from contaminating the inside. It is free of plasticizers like DEHP, so it won’t impart tastes or odors to the fluid running through it.

Polished to a 10 Ra finish on the inside, this tubing has the smoothest interior of any tubing we offer. It is commonly used in semiconductor applications.

This Type L tubing has thicker walls than Type M tubing. It withstands pressures up to 1,500 psi.

Also known as instant fittings, these connect to tubing with a push, and an internal gripping ring and O-ring hold the tubing tight. Use in applications up to 150 psi.

Tube supports slip inside tubing to prevent the walls from collapsing.

These fittings keep their strength in moist environments and meet NSF/ANSI 61 for drinking water. Also known as instant fittings.

Create a push-to-connect junction in equipment with these fittings. To install, drill a stepped hole in your surface, push the fitting components into place, then insert your tubing.

Connect these fittings to tubing with a ring and a crimping tool (both sold separately). Safe to use with drinking water, these fittings meet the strict standards of NSF/ANSI 61.

Use these fittings at pressures up to 9,700 psi. Also known as instrumentation fittings, they are made to tight tolerances for use in high-precision applications. They are compatible with Swagelok®, Let-Lok, and Parker A-Lok fittings.

These fittings have the highest pressure rating of all the Yor-Lok tube fittings we offer.

Butt-weld fittings allow for a smooth, flush connection that provides maximum flow.

Polished to a 20 Ra finish, these fittings have an extra-smooth interior that prevents product buildup and inhibits bacteria growth.

Solder these fittings to tubing for a permanent, leak-tight connection. They are also known as sweat fittings.

A nut with two sleeves (ferrules) gives these fittings extra gripping power. The sleeves bite into tubing as you tighten the nut, creating a strong seal.

Use these sleeves with Yor-Lok nuts and fittings to create an extra-strong seal on copper tubing.

Crimp these fittings to copper tubing with a crimping tool for a leak-tight connection that doesn’t require heat or soldering. They are comparable to Viega ProPress fittings.

Made of plastic, these fittings are lightweight compared to our brass push-to-connect fittings.

These fittings have two sleeves for extra gripping power. They bite into steel tubing as you tighten the nut to form a strong seal.

With the best corrosion resistance of any metal fitting we offer, these Hastelloy fittings will stand up to aggressive chemicals and are resistant to pitting and stress cracking. Also known as instrumentation fittings, they include a nut with two sleeves.

Certified to meet NSF/ANSI 61, this hose is safe for use in drinking water systems.

Keep your water running in temperatures down to -20° F.

Safely suction, transfer, and dispense drinking water.

Certified to meet NSF/ANSI 61, this discharge hose is safe for use with drinking water. It lays flat when not in use, so you can roll it up for easy transport and storage.

Move milk, syrup, meat, and other wet-food and drink products through lines connected by cam-and-groove fittings.

Also known as ball-seat hose nipples, these fittings consist of a barbed shaft with a rounded end that sits inside a female threaded nut. When mated with a male threaded fitting, the rounded end presses tightly against the inside of the male threads for a better seal than a single-piece fitting. Once assembled, insert the barbed end into hose and secure with a clamp or a crimp-on hose ferrule.

Metal cam-and-groove couplings have better durability than plastic cam-and-groove couplings.

Low-profile barbs and a longer first barb allow for a smoother, easier installation than other barbed fittings. Slide the barbed end into hose and secure with a clamp.

These fittings are FDA compliant, so they’re suitable for food and beverage applications and won’t impart tastes or odors to the product. Secure barbed ends into plastic or rubber hose with a clamp.

Couplings are made of FDA listed materials, so they’re suitable for food and beverage applications and won’t impart tastes or odors to the product. They consist of a plug and a socket that connect and disconnect quickly. Use them if you need frequent access to a line. To connect, insert the plug into the socket and push the levers down.

Typically used with standard-wall and low-pressure stainless steel unthreaded pipe fittings.

Typically used with low-pressure stainless steel threaded pipe fittings.

Typically used with low-pressure stainless steel threaded pipe fittings.

Typically used with low-pressure aluminum threaded pipe fittings.

Also known as Schedule 40, this steel pipe is designed for low-pressure applications.

For extra leak protection in low-pressure lines, the threads of this Schedule 40 pipe have sealant already applied.

A plastic sleeve prevents destructive corrosion when connecting different metals.

The acrylic sealant on this pipe offers extra protection against leaks. Also known as schedule 40 pipe, this pipe is designed for use in low-pressure environments.

Typically used with medium-pressure galvanized iron and steel threaded pipe fittings. Also known as Schedule 80.

Typically used with high-pressure iron and steel threaded pipe fittings. Also known as Schedule 160.

Typically used with high-pressure brass and bronze threaded pipe fittings.

Keep various lengths of brass pipe on hand for applications requiring good corrosion resistance.

Connect this pipe to standard-wall plastic pipe fittings for a variety of residential and commercial low-pressure plumbing and water supply applications.

Connect to thick-wall plastic pipe fittings for use in heavy duty industrial plumbing and water supply applications, such as water processing, waste water treatment, and irrigation. Pipe can handle pressures up to 900 psi.

Connect to barbed plastic pipe fittings with a clamp. Pipe isn't as bendable as soft tubing, but can still bend around objects, resulting in fewer connection points in your line. Fewer connection points not only shortens installation time, but also allows for smoother flow through the line.

This polypropylene pipe resists the damaging effects of ultraviolet light, so it’s suitable for outdoor use. It has the chemical resistance to withstand acids, solvents, and other harsh substances.

Join pieces of conduit.

Connect to the end of conduit or a fitting to protect wires from abrasion when being pulled.

Create a permanent seal without applying heat. This tubing is also known as cold-shrink tubing.