Specifications Met Specifications Met | Hide |
|---|
Material Material |
|---|
System of Measurement System of Measurement |
|---|
|
Inside Width Inside Width |
|---|
|
|
|
Hardness Rating Hardness Rating |
|---|
|
Inside Height Inside Height |
|---|
|
|
|
Tolerance Rating Tolerance Rating |
|---|
|
Appearance Appearance |
|---|
 | Plain |
Hardness Hardness |
|---|
|
Surface Resistivity Surface Resistivity |
|---|
|
Thermal Conductivity Thermal Conductivity |
|---|
|
Yield Strength Yield Strength |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
About Copper, Brass, and Bronze
More
Easy-to-Machine Architectural 385 Brass Bars
- Yield Strength: 16,000 psi
- Hardness: Rockwell B40 (Soft)
- Temper: See table
- Heat Treatable: No
- Specifications Met: ASTM B455
Often called architectural bronze, 385 brass is easy to machine and has excellent formability when heated. It is typically used for handrails, ornamental trim, and hardware, such as hinges and lock bodies.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
| Wd. | Temper | 2 ft. Lg. | 4 ft. Lg. | 6 ft. Lg. | |
1/8" Thick. (-0.01" to 0.01" Tolerance) | |||||
|---|---|---|---|---|---|
| 1/2" | H02 (1/2 Hard) | 0000000 | |||
| 3/4" | H02 (1/2 Hard) | 0000000 | |||
| 1" | H02 (1/2 Hard) | 0000000 | |||
| 1 1/4" | Not Rated | 0000000 | |||
| 1 1/2" | H02 (1/2 Hard) | 0000000 | |||
| 2" | H02 (1/2 Hard) | 0000000 | |||
3/16" Thick. (-0.01" to 0.01" Tolerance) | |||||
| 1" | H02 (1/2 Hard) | 0000000 | |||
1/4" Thick. (-0.045" to 0.045" Tolerance) | |||||
| 1/4" | H02 (1/2 Hard) | 0000000 | |||
1/4" Thick. (-0.01" to 0.01" Tolerance) | |||||
| 1/2" | H02 (1/2 Hard) | 0000000 | |||
| 1" | H02 (1/2 Hard) | 0000000 | |||
| 1 1/2" | H02 (1/2 Hard) | 0000000 | |||
| 2" | H02 (1/2 Hard) | 0000000 | |||
| 3" | H02 (1/2 Hard) | 0000000 | |||
3/8" Thick. (-0.01" to 0.01" Tolerance) | |||||
| 1/2" | H02 (1/2 Hard) | 0000000 | |||
| 3/4" | H02 (1/2 Hard) | 0000000 | |||
| 1" | H02 (1/2 Hard) | 0000000 | |||
| 2" | H02 (1/2 Hard) | 0000000 | |||
1/2" Thick. (-0.01" to 0.01" Tolerance) | |||||
| 1/2" | H02 (1/2 Hard) | 0000000 | |||
| 3/4" | H02 (1/2 Hard) | 0000000 | |||
| 1" | H02 (1/2 Hard) | 0000000 | |||
| 2" | H02 (1/2 Hard) | 0000000 | |||
3/4" Thick. (-0.01" to 0.01" Tolerance) | |||||
| 3/4" | H02 (1/2 Hard) | 0000000 | |||
| 1" | H02 (1/2 Hard) | 0000000 | |||
1" Thick. (-0.01" to 0.01" Tolerance) | |||||
| 1" | H02 (1/2 Hard) | 0000000 | |||
Easy-to-Machine Architectural 385 Brass 90° Angles
- Yield Strength: 16,000 psi
- Hardness: Rockwell B40 (Soft)
- Temper:
1/16" wall thick.: M30
All other sizes: H02 (1/2 Hard) - Heat Treatable: No
- Specifications Met: ASTM B455
Often called architectural bronze, 385 brass is easy to machine and has excellent formability when heated. It is typically used for handrails, ornamental trim, and hardware, such as hinges and lock bodies.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Outside | Inside | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Ht. | Ht. Tolerance | Wd. | Wd. Tolerance | Ht. | Wd. | 2 ft. Lg. | 4 ft. Lg. | 6 ft. Lg. | |
1/16" Wall Thick. (-0.0006" to 0.0006" Tolerance) | |||||||||
| 3/4" | -0.008" to 0.008" | 3/4" | -0.008" to 0.008" | 11/16" | 11/16" | 0000000 | |||
1/8" Wall Thick. (-0.0013" to 0.0013" Tolerance) | |||||||||
| 1/2" | -0.005" to 0.005" | 1/2" | -0.005" to 0.005" | 3/8" | 3/8" | 0000000 | |||
| 3/4" | -0.008" to 0.008" | 3/4" | -0.008" to 0.008" | 5/8" | 5/8" | 0000000 | |||
| 1" | -0.01" to 0.01" | 3/4" | -0.008" to 0.008" | 7/8" | 5/8" | 0000000 | |||
| 1" | -0.01" to 0.01" | 1" | -0.01" to 0.01" | 7/8" | 7/8" | 0000000 | |||
| 1 1/4" | -0.013" to 0.013" | 1 1/4" | -0.013" to 0.013" | 1 1/8" | 1 1/8" | 0000000 | |||
| 1 1/2" | -0.015" to 0.015" | 1 1/2" | -0.015" to 0.015" | 1 3/8" | 1 3/8" | 0000000 | |||
| 2" | -0.02" to 0.02" | 2" | -0.02" to 0.02" | 1 7/8" | 1 7/8" | 0000000 | |||
3/16" Wall Thick. (-0.0019" to 0.0019" Tolerance) | |||||||||
| 1" | -0.01" to 0.01" | 1" | -0.01" to 0.01" | 13/16" | 13/16" | 0000000 | |||
| 1 1/4" | -0.013" to 0.013" | 1 1/4" | -0.013" to 0.013" | 1 1/16" | 1 1/16" | 0000000 | |||
| 1 1/2" | -0.015" to 0.015" | 1 1/2" | -0.015" to 0.015" | 1 5/16" | 1 5/16" | 0000000 | |||
| 2" | -0.02" to 0.02" | 2" | -0.02" to 0.02" | 1 13/16" | 1 13/16" | 0000000 | |||
1/4" Wall Thick. (-0.0025" to 0.0025" Tolerance) | |||||||||
| 1 1/2" | -0.015" to 0.015" | 1 1/2" | -0.015" to 0.015" | 1 1/4" | 1 1/4" | 0000000 | |||
| 2" | -0.02" to 0.02" | 2" | -0.02" to 0.02" | 1 3/4" | 1 3/4" | 0000000 | |||
| 3" | -0.03" to 0.03" | 3" | -0.03" to 0.03" | 2 3/4" | 2 3/4" | 0000000 | |||
Easy-to-Machine Architectural 385 Brass Rods
- Yield Strength:
Inch sizes: 16,000 psi
Metric sizes: 21,000 psi - Hardness:
Inch sizes: Rockwell B40 (Soft)
Metric sizes: Rockwell B55 (Soft) - Temper:
Inch sizes: H02 (1/2 Hard)
Metric sizes: 1/2 Hard - Heat Treatable: No
- Specifications Met:
Inch sizes: ASTM B455
Metric Sizes: European Standard EN 12164
Often called architectural bronze, 385 brass is easy to machine and has excellent formability when heated. It is typically used for handrails, ornamental trim, and hardware, such as hinges and lock bodies.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Easy-to-Machine Architectural 385 Brass U-Channels
- Yield Strength: 16,000 psi
- Hardness: Rockwell B40 (Soft)
- Temper: H02 (1/2 Hard)
- Heat Treatable: No
- Specifications Met: ASTM B455
Often called architectural bronze, 385 brass is easy to machine and has excellent formability when heated. It is typically used for handrails, ornamental trim, and hardware, such as hinges and lock bodies.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Outside | Inside | |||||||
|---|---|---|---|---|---|---|---|---|
| Ht. | Ht. Tolerance | Wd. | Wd. Tolerance | Ht. | Wd. | 4 ft. Lg. | 6 ft. Lg. | |
0.093" Wall Thick. (-0.0009" to 0.0009" Tolerance) | ||||||||
| 1/2" | -0.005" to 0.005" | 1/2" | -0.005" to 0.005" | 0.407" | 0.314" | 0000000 | ||
| 3/4" | -0.008" to 0.008" | 1/2" | -0.005" to 0.005" | 0.657" | 0.314" | 0000000 | ||
1/8" Wall Thick. (-0.0013" to 0.0013" Tolerance) | ||||||||
| 3/4" | -0.008" to 0.008" | 3/4" | -0.008" to 0.008" | 5/8" | 1/2" | 0000000 | ||
| 1" | -0.001" to 0.001" | 1" | -0.001" to 0.001" | 7/8" | 3/4" | 0000000 | ||
| 1 1/4" | -0.001" to 0.001" | 1 1/4" | -0.001" to 0.001" | 1 1/8" | 1" | 0000000 | ||