Filter by
Specifications Met
System of Measurement
Threading
Material
Export Control Classification Number (ECCN)
DFARS Specialty Metals
Tensile Strength
Hardness
About Tapping Screws
More
About Hex Head Screws and Bolts
More
Steel Hex Head Screws for Wood
These steel screws have corrosion-resistant finishes. Also known as lag bolts, they have a hex head for a secure grip with a wrench. They press threads into material for a tight, secure hold. To prevent splitting, drill a pilot hole slightly smaller than the screw. Length is measured from under the head.
Hot-dipped galvanized steel screws have a thick coating for better corrosion resistance than zinc-plated steel screws. They're a good choice for ACQ-treated (arsenic-free) lumber.
For technical drawings and 3-D models, click on a part number.
Head | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Ht. | Approximate Threads per Inch | Threading | Minimum Thread Lg. | Specifications Met | Pkg. Qty. | Pkg. | |
Hot-Dipped Galvanized Steel | |||||||||
1/4"  | |||||||||
| 1" | 0.438" | 0.172" | 10 | Partially Threaded | 0.667" | ASME B18.2.1, ASTM A307, SAE J429 | 100 | 000000000 | 000000 |
| 1 1/4" | 0.438" | 0.172" | 10 | Partially Threaded | 0.833" | ASME B18.2.1, ASTM A307, SAE J429 | 100 | 000000000 | 00000 |
| 1 1/2" | 0.438" | 0.172" | 10 | Partially Threaded | 1" | ASME B18.2.1, ASTM A307, SAE J429 | 100 | 000000000 | 00000 |
| 2" | 0.438" | 0.172" | 10 | Partially Threaded | 1.333" | ASME B18.2.1, ASTM A307, SAE J429 | 100 | 000000000 | 00000 |
| 2 1/2" | 0.438" | 0.172" | 10 | Partially Threaded | 1.667" | ASME B18.2.1, ASTM A307, SAE J429 | 50 | 000000000 | 00000 |
| 3" | 0.438" | 0.172" | 10 | Partially Threaded | 2" | ASME B18.2.1, ASTM A307, SAE J429 | 50 | 000000000 | 00000 |
| 3 1/2" | 0.438" | 0.172" | 10 | Partially Threaded | 2.333" | ASME B18.2.1, ASTM A307, SAE J429 | 50 | 000000000 | 00000 |
| 4" | 0.438" | 0.172" | 10 | Partially Threaded | 2.667" | ASME B18.2.1, ASTM A307, SAE J429 | 50 | 000000000 | 00000 |
| 4 1/2" | 0.438" | 0.172" | 10 | Partially Threaded | 3" | ASME B18.2.1, ASTM A307, SAE J429 | 25 | 000000000 | 00000 |
| 5" | 0.438" | 0.172" | 10 | Partially Threaded | 3.333" | ASME B18.2.1, ASTM A307, SAE J429 | 25 | 000000000 | 00000 |
| 5 1/2" | 0.438" | 0.172" | 10 | Partially Threaded | 3 1/2" | ASME B18.2.1, ASTM A307, SAE J429 | 25 | 000000000 | 00000 |
| 6" | 0.438" | 0.172" | 10 | Partially Threaded | 4" | ASME B18.2.1, ASTM A307, SAE J429 | 25 | 000000000 | 00000 |
5/16" | |||||||||
| 1" | 0.5" | 0.219" | 9 | Partially Threaded | 0.667" | ASME B18.2.1, ASTM A307, SAE J429 | 50 | 000000000 | 00000 |
| 1 1/4" | 0.5" | 0.219" | 9 | Partially Threaded | 0.833" | ASME B18.2.1, ASTM A307, SAE J429 | 50 | 000000000 | 00000 |
| 1 1/2" | 0.5" | 0.219" | 9 | Partially Threaded | 1" | ASME B18.2.1, ASTM A307, SAE J429 | 50 | 000000000 | 00000 |
| 2" | 0.5" | 0.219" | 9 | Partially Threaded | 1.333" | ASME B18.2.1, ASTM A307, SAE J429 | 50 | 000000000 | 00000 |
| 2 1/2" | 0.5" | 0.219" | 9 | Partially Threaded | 1.667" | ASME B18.2.1, ASTM A307, SAE J429 | 50 | 000000000 | 00000 |
| 3" | 0.5" | 0.219" | 9 | Partially Threaded | 2" | ASME B18.2.1, ASTM A307, SAE J429 | 50 | 000000000 | 00000 |
| 3 1/2" | 0.5" | 0.219" | 9 | Partially Threaded | 2.333" | ASME B18.2.1, ASTM A307, SAE J429 | 25 | 000000000 | 00000 |
| 4" | 0.5" | 0.219" | 9 | Partially Threaded | 2.667" | ASME B18.2.1, ASTM A307, SAE J429 | 25 | 000000000 | 00000 |
| 4 1/2" | 0.5" | 0.219" | 9 | Partially Threaded | 3" | ASME B18.2.1, ASTM A307, SAE J429 | 25 | 000000000 | 00000 |
| 5" | 0.5" | 0.219" | 9 | Partially Threaded | 3.333" | ASME B18.2.1, ASTM A307, SAE J429 | 25 | 000000000 | 00000 |
| 6" | 0.5" | 0.219" | 9 | Partially Threaded | 4" | ASME B18.2.1, ASTM A307, SAE J429 | 25 | 000000000 | 00000 |
3/8" | |||||||||
| 1" | 0.563" | 0.25" | 7 | Partially Threaded | 5/8" | ASME B18.2.1, ASTM A307, SAE J429 | 50 | 000000000 | 00000 |
| 1 1/4" | 0.563" | 0.25" | 7 | Partially Threaded | 0.833" | ASME B18.2.1, ASTM A307, SAE J429 | 50 | 000000000 | 00000 |
| 1 1/2" | 0.563" | 0.25" | 7 | Partially Threaded | 1" | ASME B18.2.1, ASTM A307, SAE J429 | 50 | 000000000 | 00000 |
| 1 3/4" | 0.563" | 0.25" | 7 | Partially Threaded | 1.167" | ASME B18.2.1, ASTM A307, SAE J429 | 50 | 000000000 | 00000 |
| 2" | 0.563" | 0.25" | 7 | Partially Threaded | 1.333" | ASME B18.2.1, ASTM A307, SAE J429 | 50 | 000000000 | 00000 |
| 2 1/2" | 0.563" | 0.25" | 7 | Partially Threaded | 1.667" | ASME B18.2.1, ASTM A307, SAE J429 | 25 | 000000000 | 00000 |
| 3" | 0.563" | 0.25" | 7 | Partially Threaded | 2" | ASME B18.2.1, ASTM A307, SAE J429 | 25 | 000000000 | 00000 |
| 3 1/2" | 0.563" | 0.25" | 7 | Partially Threaded | 2.333" | ASME B18.2.1, ASTM A307, SAE J429 | 25 | 000000000 | 00000 |
| 4" | 0.563" | 0.25" | 7 | Partially Threaded | 2.667" | ASME B18.2.1, ASTM A307, SAE J429 | 25 | 000000000 | 00000 |
| 4 1/2" | 0.563" | 0.25" | 7 | Partially Threaded | 3" | ASME B18.2.1, ASTM A307, SAE J429 | 10 | 000000000 | 00000 |
| 5" | 0.563" | 0.25" | 7 | Partially Threaded | 3.333" | ASME B18.2.1, ASTM A307, SAE J429 | 10 | 000000000 | 00000 |
| 5 1/2" | 0.563" | 0.25" | 7 | Partially Threaded | 3 1/2" | ASME B18.2.1, ASTM A307, SAE J429 | 10 | 000000000 | 00000 |
| 6" | 0.563" | 0.25" | 7 | Partially Threaded | 4" | ASME B18.2.1, ASTM A307, SAE J429 | 10 | 000000000 | 00000 |
| 7" | 0.563" | 0.25" | 7 | Partially Threaded | 4.667" | ASME B18.2.1, ASTM A307, SAE J429 | 10 | 000000000 | 00000 |
| 8" | 0.563" | 0.25" | 7 | Partially Threaded | 5.333" | ASME B18.2.1, ASTM A307, SAE J429 | 10 | 000000000 | 00000 |
| 9" | 0.563" | 0.25" | 7 | Partially Threaded | 5.333" | ASME B18.2.1, ASTM A307, SAE J429 | 5 | 000000000 | 00000 |
| 10" | 0.563" | 0.25" | 7 | Partially Threaded | 4" | ASME B18.2.1, ASTM A307, SAE J429 | 5 | 000000000 | 00000 |
| 12" | 0.563" | 0.25" | 7 | Partially Threaded | 4" | ASME B18.2.1, ASTM A307, SAE J429 | 5 | 000000000 | 00000 |
1/2" | |||||||||
| 2" | 0.75" | 0.344" | 6 | Partially Threaded | 1.333" | ASME B18.2.1, ASTM A307, SAE J429 | 10 | 000000000 | 0000 |
| 2 1/2" | 0.75" | 0.344" | 6 | Partially Threaded | 1.667" | ASME B18.2.1, ASTM A307, SAE J429 | 10 | 000000000 | 00000 |
| 3" | 0.75" | 0.344" | 6 | Partially Threaded | 2" | ASME B18.2.1, ASTM A307, SAE J429 | 10 | 000000000 | 00000 |
| 3 1/2" | 0.75" | 0.344" | 6 | Partially Threaded | 2.333" | ASME B18.2.1, ASTM A307, SAE J429 | 10 | 000000000 | 00000 |
| 4" | 0.75" | 0.344" | 6 | Partially Threaded | 2.667" | ASME B18.2.1, ASTM A307, SAE J429 | 10 | 000000000 | 00000 |
| 4 1/2" | 0.75" | 0.344" | 6 | Partially Threaded | 3" | ASME B18.2.1, ASTM A307, SAE J429 | 10 | 000000000 | 00000 |
| 5" | 0.75" | 0.344" | 6 | Partially Threaded | 3.333" | ASME B18.2.1, ASTM A307, SAE J429 | 10 | 000000000 | 00000 |
| 5 1/2" | 0.75" | 0.344" | 6 | Partially Threaded | 3 1/2" | ASME B18.2.1, ASTM A307, SAE J429 | 5 | 000000000 | 00000 |
| 6" | 0.75" | 0.344" | 6 | Partially Threaded | 4" | ASME B18.2.1, ASTM A307, SAE J429 | 5 | 000000000 | 00000 |
| 7" | 0.75" | 0.344" | 6 | Partially Threaded | 4.667" | ASME B18.2.1, ASTM A307, SAE J429 | 5 | 000000000 | 00000 |
| 8" | 0.75" | 0.344" | 6 | Partially Threaded | 5.333" | ASME B18.2.1, ASTM A307, SAE J429 | 5 | 000000000 | 00000 |
| 9" | 0.75" | 0.344" | 6 | Partially Threaded | 5.333" | ASME B18.2.1, ASTM A307, SAE J429 | 1 | 000000000 | 0000 |
| 10" | 0.75" | 0.344" | 6 | Partially Threaded | 4" | ASME B18.2.1, ASTM A307, SAE J429 | 1 | 000000000 | 0000 |
| 12" | 0.75" | 0.344" | 6 | Partially Threaded | 4" | ASME B18.2.1, ASTM A307, SAE J429 | 1 | 000000000 | 0000 |
5/8" | |||||||||
| 2 1/2" | 0.938" | 0.422" | 5 | Partially Threaded | 1.667" | ASME B18.2.1, ASTM A307, SAE J429 | 5 | 000000000 | 00000 |
| 3" | 0.938" | 0.422" | 5 | Partially Threaded | 2" | ASME B18.2.1, ASTM A307, SAE J429 | 5 | 000000000 | 00000 |
| 4" | 0.938" | 0.422" | 5 | Partially Threaded | 2.667" | ASME B18.2.1, ASTM A307, SAE J429 | 5 | 000000000 | 00000 |
| 4 1/2" | 0.938" | 0.422" | 5 | Partially Threaded | 3" | ASME B18.2.1, ASTM A307, SAE J429 | 5 | 000000000 | 00000 |
| 5" | 0.938" | 0.422" | 5 | Partially Threaded | 3.333" | ASME B18.2.1, ASTM A307, SAE J429 | 5 | 000000000 | 00000 |
| 6" | 0.938" | 0.422" | 5 | Partially Threaded | 4" | ASME B18.2.1, ASTM A307, SAE J429 | 1 | 000000000 | 0000 |
| 7" | 0.938" | 0.422" | 5 | Partially Threaded | 4.667" | ASME B18.2.1, ASTM A307, SAE J429 | 1 | 000000000 | 0000 |
| 8" | 0.938" | 0.422" | 5 | Partially Threaded | 5.333" | ASME B18.2.1, ASTM A307, SAE J429 | 1 | 000000000 | 0000 |
| 10" | 0.938" | 0.422" | 5 | Partially Threaded | 6.667" | ASME B18.2.1, ASTM A307, SAE J429 | 1 | 000000000 | 0000 |
| 12" | 0.938" | 0.422" | 5 | Partially Threaded | 4" | ASME B18.2.1, ASTM A307, SAE J429 | 1 | 000000000 | 00000 |
| 16" | 0.938" | 0.422" | 5 | Partially Threaded | 4" | ASME B18.2.1, ASTM A307, SAE J429 | 1 | 000000000 | 00000 |
3/4" | |||||||||
| 4" | 1.125" | 0.5" | 4.5 | Partially Threaded | 2.667" | ASME B18.2.1, ASTM A307, SAE J429 | 1 | 000000000 | 0000 |
| 5" | 1.125" | 0.5" | 4.5 | Partially Threaded | 3.333" | ASME B18.2.1, ASTM A307, SAE J429 | 1 | 000000000 | 0000 |
| 6" | 1.125" | 0.5" | 4.5 | Partially Threaded | 4" | ASME B18.2.1, ASTM A307, SAE J429 | 1 | 000000000 | 0000 |
| 7" | 1.125" | 0.5" | 4.5 | Partially Threaded | 4.667" | ASME B18.2.1, ASTM A307, SAE J429 | 1 | 000000000 | 0000 |
| 8" | 1.125" | 0.5" | 4.5 | Partially Threaded | 5.333" | ASME B18.2.1, ASTM A307, SAE J429 | 1 | 000000000 | 00000 |
| 10" | 1.125" | 0.5" | 4.5 | Partially Threaded | 4" | ASME B18.2.1, ASTM A307, SAE J429 | 1 | 000000000 | 00000 |
| 12" | 1.125" | 0.5" | 4.5 | Partially Threaded | 4" | ASME B18.2.1, ASTM A307, SAE J429 | 1 | 000000000 | 00000 |
Steel Flanged Hex Head Screws for Wood
These steel screws are hot-dipped galvanized to resist corrosion in wet environments and are a good choice for ACQ-treated (arsenic-free) lumber. The flange reduces the risk of crushing material and the hex head provides a secure grip with a wrench. They press threads into material for a tight, secure hold. To prevent splitting, drill a pilot hole slightly smaller than the screw. Head height includes the flange. Length is measured from under the head.
For technical drawings and 3-D models, click on a part number.
Head | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Ht. | Flange Dia. | Approximate Threads per Inch | Threading | Minimum Thread Lg. | Specifications Met | Pkg. Qty. | Pkg. | |
Hot-Dipped Galvanized Steel | ||||||||||
1/4" | ||||||||||
| 1" | 0.375" | 0.28" | 0.56" | 10 | Fully Threaded | 1/2" | ASTM A153 | 100 | 000000000 | 000000 |
| 1 1/2" | 0.375" | 0.28" | 0.56" | 10 | Partially Threaded | 3/4" | ASTM A153 | 50 | 000000000 | 00000 |
| 2" | 0.375" | 0.28" | 0.56" | 10 | Partially Threaded | 1" | ASTM A153 | 50 | 000000000 | 00000 |
| 2 1/2" | 0.375" | 0.28" | 0.56" | 10 | Partially Threaded | 1 1/4" | ASTM A153 | 50 | 000000000 | 00000 |
| 3" | 0.375" | 0.28" | 0.56" | 10 | Partially Threaded | 1 1/2" | ASTM A153 | 50 | 000000000 | 00000 |
5/16" | ||||||||||
| 1" | 0.5" | 0.32" | 0.68" | 9 | Fully Threaded | 1/2" | ASTM A153 | 50 | 000000000 | 00000 |
| 1 1/2" | 0.5" | 0.32" | 0.68" | 9 | Partially Threaded | 3/4" | ASTM A153 | 50 | 000000000 | 00000 |
| 2" | 0.5" | 0.32" | 0.68" | 9 | Partially Threaded | 1" | ASTM A153 | 50 | 000000000 | 00000 |
| 2 1/2" | 0.5" | 0.32" | 0.68" | 9 | Partially Threaded | 1 1/4" | ASTM A153 | 25 | 000000000 | 00000 |
3/8" | ||||||||||
| 1 1/2" | 0.563" | 0.39" | 0.81" | 7 | Fully Threaded | 3/4" | ASTM A153 | 25 | 000000000 | 00000 |
| 2" | 0.563" | 0.39" | 0.81" | 7 | Partially Threaded | 1" | ASTM A153 | 25 | 000000000 | 00000 |
| 2 1/2" | 0.563" | 0.39" | 0.81" | 7 | Partially Threaded | 1 1/4" | ASTM A153 | 25 | 000000000 | 00000 |
| 3" | 0.563" | 0.39" | 0.81" | 7 | Partially Threaded | 1 1/2" | ASTM A153 | 25 | 000000000 | 00000 |
| 4" | 0.563" | 0.39" | 0.81" | 7 | Partially Threaded | 2" | ASTM A153 | 10 | 000000000 | 00000 |
| 5" | 0.563" | 0.39" | 0.81" | 7 | Partially Threaded | 3" | ASTM A153 | 5 | 000000000 | 0000 |
| 6" | 0.563" | 0.39" | 0.81" | 7 | Partially Threaded | 3 1/2" | ASTM A153 | 5 | 000000000 | 00000 |
Wood Screw-Style Hangers
Drive these hangers into wood with an adjustable wrench, pliers, or a special driver bit (sold separately). They’re also known as eye lags.
Zinc- and zinc yellow-chromate plated steel hangers are corrosion resistant in wet environments. The zinc yellow-chromate plated steel hangers meet quality standards outlined in ASTM B633 and dimensional standards outlined in ASME B18.2.1.
For technical drawings and 3-D models, click on a part number.
Hangers | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Head | Driver Bits | |||||||||||||
| Screw Size | Lg. | Threading | Thread Lg. | Eye Dia. | Wd. | Thick. | Ht. | For Use In | Specifications Met | Pkg. Qty. | Pkg. | Each | ||
Zinc Yellow-Chromate Plated Steel | ||||||||||||||
| 1/4" | 3" | Partially Threaded | 1 1/2" | 3/16" | 13/32" | 3/32" | 23/32" | Wood | ASME B18.2.1, ASTM B633 | 50 | 000000000 | 000000 | 0000000 | 00000 |
| 1/4" | 4" | Partially Threaded | 1 1/2" | 3/16" | 13/32" | 3/32" | 23/32" | Wood | ASME B18.2.1, ASTM B633 | 25 | 000000000 | 00000 | 0000000 | 0000 |
| 1/4" | 5" | Partially Threaded | 1 1/2" | 3/16" | 13/32" | 3/32" | 23/32" | Wood | ASME B18.2.1, ASTM B633 | 25 | 000000000 | 00000 | 0000000 | 0000 |
| 5/16" | 3 1/2" | Partially Threaded | 1 3/4" | 1/4" | 7/16" | 3/32" | 9/16" | Wood | ASME B18.2.1, ASTM B633 | 25 | 000000000 | 00000 | 0000000 | 0000 |