Band Heaters | McMaster-Carr

Clear All

	Heater Type Heater Type	Show

Band

	Heater Type Heater Type	Hide

	Voltage Voltage

120V AC

240V AC

480V AC

	System of Measurement System of Measurement

Inch

	For Barrel OD For Barrel OD

	Electrical Connection Type Electrical Connection Type


Hardwire	Plug

	Width Width

1 1/2"

2 1/2"

	For Container Capacity For Container Capacity

	Maximum Heat Output Maximum Heat Output

	Wattage Wattage

Less than 10,000 W

	Temperature Control Type Temperature Control Type

None

Adjustable Thermostat

Nonadjustable Thermostat

Time-Cycle Controller

Time-Frequency Controller

	For Surface Material For Surface Material

	Current Current

	Material Material

	Overall Length Overall Length

	Overall Width Overall Width

	Electrical Phase Electrical Phase

Single

Three

	NEMA Style NEMA Style


5-15	5-20	6-15

L5-15	L6-20	L15-20

L16-20

	Power Source Power Source

Electric

	DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense Acquisition Regulations Supplement)

DFARS Specialty Metals
COTS-Exempt

	For Nozzle OD For Nozzle OD

1 1/2"

2 1/2"

	RoHS (Restriction of Hazardous Substances) RoHS (Restriction of Hazardous Substances)

RoHS Compliant

RoHS Compliant with
Exemptions

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

	Wire Connection Type Wire Connection Type


Wire Leads	Screw Terminals

Forward

How can we improve?

148 Products

Wrap-Around Heaters for Pails and Drums

With Plug

With Wire Leads

5-15

Also known as band heaters, these wrap around containers to warm contents without direct contact. An adjustable thermostat automatically turns the heater on when the temperature drops below your set temperature and off when it rises above your set temperature. Adjust the set temperature with the dial. The spring-loaded clamp closure allows heaters to expand to fit around slightly larger container diameters. Do not use these heaters with flammable materials or in hazardous areas.

9 1/2" wide heaters maximize surface area contact and heat distribution.

Expansion straps for 9 1/2" wide heaters (not included) allow the heaters to fit around containers 1 1/2" to 11" larger in diameter. Two expansion straps are required for each heater.

For Container		O'all
Cap., gal.	Dia.	Lg.	Wd.	Wattage, W	Watt Density, W/sq. in.	Voltage	Electrical Phase	Current, A	Thick.	Electrical Connection Type	NEMA Style	Wire Lead Lg.	Material		Each
For Metal Containers
50° to 425° F Temp. Control Range
5	11 1/8"	35"	4"	550	4	120V AC	Single	4.6	0.125"	Plug	5-15	__	Silicone Rubber	0000000	0000000
5	11 1/4"	31"	3"	300	4.1	120V AC	Single	2.5	0.095"	Plug	5-15	__	Silicone Rubber	0000000	000000
15	14"	44"	4"	700	4	120V AC	Single	5.8	0.125"	Plug	5-15	__	Silicone Rubber	0000000	000000
15	14"	44"	4"	700	4	240V AC	Single	2.9	0.125"	Hardwire	__	72"	Silicone Rubber	0000000	000000
15	14 1/2"	38"	3"	500	4.7	120V AC	Single	4.2	0.095"	Plug	5-15	__	Silicone Rubber	0000000	000000
30	18 1/4"	52"	3"	750	5.9	120V AC	Single	6.3	0.095"	Plug	5-15	__	Silicone Rubber	0000000	000000
30	18 9/16"	58 1/2"	4"	1,000	4	120V AC	Single	8.3	0.125"	Plug	5-15	__	Silicone Rubber	0000000	000000
30	18 9/16"	58 1/2"	4"	1,000	4	240V AC	Single	4.2	0.125"	Hardwire	__	72"	Silicone Rubber	0000000	000000
55	22 3/8"	70"	4"	1,200	4	120V AC	Single	10	0.125"	Plug	5-15	__	Silicone Rubber	0000000	000000
55	22 3/8"	70"	4"	1,200	4	240V AC	Single	5	0.125"	Hardwire	__	72"	Silicone Rubber	0000000	000000
55	22 1/2"	64"	3"	1,000	6.4	120V AC	Single	8.3	0.095"	Plug	5-15	__	Silicone Rubber	0000000	000000
55	22 1/2"	64"	3"	1,000	6.4	240V AC	Single	4.2	0.095"	Hardwire	__	72"	Silicone Rubber	0000000	000000
For Metal, Plastic, or Fiberglass Containers
70° to 140° F Temp. Control Range
5	11 1/2"	35"	9 1/2"	300	1.04	120V AC	Single	2.5	0.11"	Plug	5-15	__	Silicone Rubber	0000000	000000
55	22 1/2"	70 9/16"	9 1/2"	750	1.2	120V AC	Single	6.3	0.11"	Plug	5-15	__	Silicone Rubber	0000000	000000
70° to 190° F Temp. Control Range
5	11 1/2"	35"	9 1/2"	1,000	2.95	120V AC	Single	8.3	0.11"	Plug	5-15	__	Silicone Rubber	0000000	000000
15	13 1/2"	43 1/2"	9 1/2"	1,000	2.42	120V AC	Single	8.3	0.11"	Plug	5-15	__	Silicone Rubber	0000000	000000
55	22 1/2"	70 9/16"	9 1/2"	1,500	2.39	120V AC	Single	12.5	0.11"	Plug	5-15	__	Silicone Rubber	0000000	000000
For Plastic Containers
50° to 160° F Temp. Control Range
5	11 1/8"	35"	4"	150	1	120V AC	Single	1.3	0.125"	Plug	5-15	__	Silicone Rubber	00000000	000000
15	14"	44"	4"	200	1	120V AC	Single	1.7	0.125"	Plug	5-15	__	Silicone Rubber	00000000	000000
15	14"	45"	4"	200	1	240V AC	Single	0.8	0.125"	Hardwire	__	72"	Silicone Rubber	00000000	000000
30	18 9/16"	58 1/2"	4"	250	1	120V AC	Single	2.1	0.125"	Plug	5-15	__	Silicone Rubber	00000000	000000
30	18 9/16"	58 1/2"	4"	250	1	240V AC	Single	1	0.125"	Hardwire	__	72"	Silicone Rubber	00000000	000000
55	22 3/8"	70"	4"	300	1	120V AC	Single	2.5	0.125"	Plug	5-15	__	Silicone Rubber	00000000	000000
55	22 3/8"	70"	4"	300	1	240V AC	Single	1.3	0.125"	Hardwire	__	72"	Silicone Rubber	00000000	000000

Expansion Straps for 9 1/2" Wide Heaters

0000000

Each

000000

Adjustable-Diameter Wrap-Around Heaters for Pails and Drums

With Wire Leads

With Plug

Nonstandard-size containers are no problem—use the hook-and-loop closure to adjust these heaters to fit a range of diameters. They wrap around containers to heat contents without direct contact. All require a temperature switch or controller (sold separately) to regulate heat output. Do not use with flammable materials or in hazardous areas.

	O'all
For Container Dia.	Lg.	Wd.	Wattage, W	Watt Density, W/sq. in.	Voltage	Electrical Phase	Current, A	Thick.	Max. Heat Output, °F	For Surface Material	Material		Each
With Wire Leads
2" to 4"	20"	4"	200	2.5	240V AC	Single	0.9	0.07"	375°	Fiberglass, Metal	Silicone Rubber	00000000	0000000
6" to 8"	32"	4 7/8"	400	2.5	240V AC	Single	1.8	0.07"	375°	Fiberglass, Metal	Silicone Rubber	00000000	000000
10" to 12"	50"	5 7/8"	575	2.5	240V AC	Single	2.6	0.07"	375°	Fiberglass, Metal	Silicone Rubber	00000000	000000
14" to 16"	65"	8"	1,300	2.5	240V AC	Single	5.9	0.07"	375°	Fiberglass, Metal	Silicone Rubber	00000000	000000
18" to 20"	82"	10"	2,000	2.5	240V AC	Single	9	0.07"	375°	Fiberglass, Metal	Silicone Rubber	00000000	000000
With Plug
2" to 4"	20"	4"	200	2.5	120V AC	Single	1.7	0.07"	375°	Fiberglass, Metal	Silicone Rubber	00000000	000000
6" to 8"	32"	4 7/8"	400	2.5	120V AC	Single	3.3	0.07"	375°	Fiberglass, Metal	Silicone Rubber	00000000	000000
10" to 12"	50"	5 7/8"	575	2.5	120V AC	Single	4.8	0.07"	375°	Fiberglass, Metal	Silicone Rubber	00000000	000000
14" to 16"	65"	8"	1,300	2.5	120V AC	Single	10.8	0.07"	375°	Fiberglass, Metal	Silicone Rubber	00000000	000000
18" to 20"	82"	10"	2,000	2.5	120V AC	Single	16.7	0.07"	375°	Fiberglass, Metal	Silicone Rubber	00000000	000000

Heavy Duty Wrap-Around Heaters for Pails and Drums

With One Output Setting

With Three Output Settings

5-15

5-20

6-15

For applications requiring high heat over long periods of time, these aluminized steel heaters warm up faster and are more durable than silicone rubber heaters. They wrap around containers to heat contents without direct contact. Heaters should be positioned at the base of the pail or drum. The spring-loaded clamp closure allows heaters to expand to fit around slightly larger container diameters. Heaters are not for use with flammable materials or in hazardous areas.

Heaters with three output settings have a dial to select low, medium, or high watt density.

Nonadjustable thermostat automatically turns the heater on when the temperature drops below the factory-set temperature and off when it rises above the factory-set temperature. The thermostat keeps the heater temperature at or below 165° F. Adjustable thermostats automatically turn the heater on when the temperature drops below your set temperature and off when it rises above your set temperature. Adjust the set temperature with the dial.

Time-cycle controllers constantly cycle on and off to maintain your set temperature with less fluctuation than thermostats. Turn the dial to adjust the ratio of on to off time. Controllers require a thermometer (sold separately) for calibration and temperature monitoring.

For Container		O'all
Cap., gal.	Dia.	Lg.	Wd.	Wattage, W	Watt Density, W/sq. in.	Voltage	Electrical Phase	Current, A	Thick.	NEMA Style	For Surface Material		Each
Nonadjustable Thermostat—With One Output Setting
165° F Max. Heat Output
55	22 1/2"	67 5/8"	9 1/4"	800	1.71	120V AC	Single	6.6	3/16"	5-15	Plastic	0000000	0000000
Adjustable Thermostat—With Three Output Settings
200° to 400° F Temp. Control Range
5	11 1/4"	33 3/8"	5"	1,500	3 6 12	120V AC	Single	12.5	11/16"	5-15	Metal	0000000	000000
16	14 1/2"	43 1/2"	5"	1,500	2.35 4.69 9.38	120V AC	Single	12.5	11/16"	5-15	Metal	0000000	000000
30	18 1/2"	54 7/8"	5"	1,920	2.4 4.8 9.6	120V AC	Single	16	11/16"	5-20	Metal	0000000	000000
55	22 1/2"	67 5/8"	5"	1,750	1.69 3.37 6.73	120V AC	Single	14.6	11/16"	5-15	Metal	0000000	000000
55	22 1/2"	67 5/8"	5"	1,920	1.85 3.7 7.4	120V AC	Single	16	11/16"	5-20	Metal	0000000	000000
55	22 1/2"	67 5/8"	5"	3,000	2.88 5.77 11.54	240V AC	Single	12.5	11/16"	6-15	Metal	0000000	000000
60° to 250° F Temp. Control Range
5	11 1/4"	33 3/8"	5"	1,500	3 6 12	120V AC	Single	12.5	11/16"	5-15	Metal	0000000	000000
16	14 1/2"	43 1/2"	5"	1,500	2.35 4.69 9.38	120V AC	Single	12.5	11/16"	5-15	Metal	0000000	000000
30	18 1/2"	54 7/8"	5"	1,920	2.4 4.8 9.6	120V AC	Single	16	11/16"	5-20	Metal	0000000	000000
55	22 1/2"	67 5/8"	5"	1,750	1.69 3.37 6.73	120V AC	Single	14.6	11/16"	5-15	Metal	0000000	000000
55	22 1/2"	67 5/8"	5"	1,920	1.85 3.7 7.4	120V AC	Single	16	11/16"	5-20	Metal	0000000	000000
55	22 1/2"	67 5/8"	5"	3,000	2.88 5.77 11.54	240V AC	Single	12.5	11/16"	6-15	Metal	0000000	000000
Time-Cycle Controller—With Three Output Settings
500° F Max. Heat Output
5	11 1/4"	33 3/8"	5"	1,500	3 6 12	120V AC	Single	12.5	11/16"	5-15	Metal	0000000	000000
16	14 1/2"	43 1/2"	5"	1,500	2.35 4.69 9.38	120V AC	Single	12.5	11/16"	5-15	Metal	0000000	000000
30	18 1/2"	54 7/8"	5"	1,750	2.18 4.38 8.75	120V AC	Single	14.6	11/16"	5-20	Metal	0000000	000000
55	22 1/2"	67 5/8"	5"	1,750	1.68 3.36 6.73	120V AC	Single	14.6	11/16"	5-20	Metal	0000000	000000
55	22 1/2"	67 5/8"	5"	3,000	2.88 5.77 11.54	240V AC	Single	12.5	11/16"	6-15	Metal	0000000	000000

Insulating Wrap-Around Heaters for Pails, Drums, and Totes

For 5-, 15-, 30-, and 55-Gallon Containers with Adjustable Thermostat

For 5- and 55-Gallon Containers

For 275- and 330-Gallon Containers

For 330-Gallon Containers with Adjustable Thermostat

For 355-, 415-, and 475-Gallon Containers with Time-Frequency Controller

Also known as heat blankets, these heaters completely surround containers for fast heating and increased heat retention in unheated and drafty areas. Do not use in hazardous areas.

Heaters with an adjustable thermostat automatically turn on when the temperature drops below your set temperature and off when it rises above your set temperature. Adjust the set temperature with the keypad. Those heaters for 56" high containers have an extended frame to fit pump housing, an opening for the pump equipment, and a cover with a flap to insulate the opening. Use them for epoxies, diesel exhaust fluid, water, chemicals, resins, rubber, and other materials with pumping applications.

Heaters without temperature control require a temperature switch or controller (sold separately) for regulating heat output. Some have a resettable fuse that opens if the heater temperature rises above the maximum heat output to prevent overheating. Once you set them up, there’s no need to monitor these heaters because they have one consistent, safe temperature. There’s no risk of tampering with the temperature, which could damage containers and their contents. Add insulated expansion strips to make heaters for 22 1/2" dia. containers fit drums with a diameter up to 24.2". They’re also needed for these heaters to fit around drums with removable lids.

Add insulated top covers to reduce heat loss and speed up heating. Covers with a through-port access flap give you easy access and further minimize heat loss.

Heaters

5-15

6-15

For Container
Dia.	Wd.	Dp.	Ht.	Wattage, W	Watt Density, W/sq. in.	Voltage	Electrical Phase	Current, A	Max. Heat Output, °F	NEMA Style	For Surface Material	Material	Features		Each
For 5- Gallon Containers
With Adjustable Thermostat—50° to 450° F Temp. Control Range
11 1/8"	__	__	13"	550	__	120V AC	Single	4.6	450°	5-15	Metal	Silicone/Fiberglass Blend Fabric	__	0000000	0000000
Without Temperature Control
11 3/4"	__	__	18"	110	0.25	120V AC	Single	1	120°	5-15	Plastic	Vinyl Plastic	Overheat Protection	000000	000000
11 3/4"	__	__	18"	160	0.5	120V AC	Single	1.4	155°	5-15	Metal	Vinyl Plastic	Overheat Protection	000000	000000
For 15- Gallon Containers
With Adjustable Thermostat—50° to 450° F Temp. Control Range
14"	__	__	26"	870	__	120V AC	Single	7.3	450°	5-15	Metal	Silicone/Fiberglass Blend Fabric	__	0000000	000000
14"	__	__	26"	870	__	240V AC	Single	3.7	450°	6-15	Metal	Silicone/Fiberglass Blend Fabric	__	0000000	000000
For 30- Gallon Containers
With Adjustable Thermostat—50° to 450° F Temp. Control Range
18 5/8"	__	__	29"	1,160	__	120V AC	Single	9.7	450°	5-15	Metal	Silicone/Fiberglass Blend Fabric	__	0000000	000000
For 55- Gallon Containers
With Adjustable Thermostat—50° to 160° F Temp. Control Range
22 5/16"	__	__	34"	770	1	120V AC	Single	6.4	160°	5-15	Plastic	Silicone/Fiberglass Blend Fabric	__	0000000	000000
With Adjustable Thermostat—50° to 450° F Temp. Control Range
22 5/16"	__	__	34"	1,600	2	120V AC	Single	13.3	450°	5-15	Metal	Silicone/Fiberglass Blend Fabric	__	0000000	000000
22 5/16"	__	__	34"	1,600	2	240V AC	Single	6.7	450°	6-15	Metal	Silicone/Fiberglass Blend Fabric	__	0000000	000000
Without Temperature Control
22 1/2"	__	__	36"	470	0.25	120V AC	Single	3.6	80°	5-15	Foam	Vinyl Plastic	Overheat Protection	000000	000000
22 1/2"	__	__	36"	500	0.25	120V AC	Single	4	100°	5-15	Foam	Vinyl Plastic	Overheat Protection	000000	000000
22 1/2"	__	__	36"	540	0.25	120V AC	Single	5	120°	5-15	Plastic	Vinyl Plastic	Overheat Protection	000000	000000
22 1/2"	__	__	36"	780	0.5	120V AC	Single	7	155°	5-15	Metal	Vinyl Plastic	Overheat Protection	000000	000000
For 275- Gallon Containers
Without Temperature Control
__	40"	48"	46"	1,440	0.25	120V AC	Single	12	135°	5-15	Fiberglass, Metal, Plastic	Vinyl Plastic	Overheat Protection, Resettable Fuse	000000	00000000
For 330- Gallon Containers
Without Temperature Control
__	48"	40"	56"	1,440	0.25	120V AC	Single	12	135°	5-15	Fiberglass, Metal, Plastic	Vinyl Plastic	Overheat Protection	000000	00000000
With Adjustable Thermostat— -30° to 135° F
__	48"	40"	56"	1,440	0.25	120V AC	Single	12	135°	5-15	Metal, Plastic	Vinyl Plastic	Overheat Protection, Resettable Fuse	0000000	00000000
For 355- Gallon Containers
With Time-Frequency Controller
__	40"-48"	40"-48"	36"	1,440	__	120V AC	Single	12	160°	5-15	Metal, Plastic	Silicone/Fiberglass Blend Fabric	Overheat Protection	0000000	00000000
__	40"-48"	40"-48"	36"	2,880	__	240V AC	Single	12	160°	6-15	Metal, Plastic	Silicone/Fiberglass Blend Fabric	Overheat Protection	0000000	00000000
For 415- Gallon Containers
With Time-Frequency Controller
__	40"-48"	40"-48"	42"	1,440	__	120V AC	Single	12	160°	5-15	Metal, Plastic	Silicone/Fiberglass Blend Fabric	Overheat Protection	0000000	00000000
__	40"-48"	40"-48"	42"	2,880	__	240V AC	Single	12	160°	6-15	Metal, Plastic	Silicone/Fiberglass Blend Fabric	Overheat Protection	0000000	00000000
For 475- Gallon Containers
With Time-Frequency Controller
__	40"-48"	40"-48"	48"	1,440	__	120V AC	Single	12	160°	5-15	Metal, Plastic	Silicone/Fiberglass Blend Fabric	Overheat Protection	0000000	00000000

Insulated Expansion Strips for Heaters for 22 1/2" Dia. Containers

Insulated Expansion Strip

Thick.	Lg.	Wd.	Material	Insulation Material		Each
1.2"	36"	6"	Silicone/Fiberglass Blend Fabric	Fiberglass	0000000	0000000

Insulated Top Covers

22-5/16" Dia. Insulated Top Cover

56" Lg. Insulated Top Cover with Access Flap

For Heaters for 55-Gallon Containers
Thick.	Dia.	Lg.	Wd.	Material	Insulation Material	Features		Each
1.2"	22 5/16"	__	__	Silicone/Fiberglass Blend Fabric	Fiberglass	__	0000000	0000000
For Heaters for 355-, 415-, and 475-Gallon Containers
0.4"	__	56"	48"	Silicone/Fiberglass Blend Fabric	Fiberglass	Through-Port Access Flap	0000000	000000

Noncontact Wrap-Around Heaters for Pails and Drums

For 5-Gallon Containers

For 55-Gallon Containers

5-15

L16-20

L6-20

L5-15

L15-20

To prevent hot spots that can damage heat-sensitive materials such as adhesives, sealants, and food, these heaters warm the air around containers without touching them. They provide uniform heat to 80% of the container. An adjustable thermostat automatically turns the heater on when the temperature drops below your set temperature and off when it rises above your set temperature. Adjust the set temperature with the dial. Do not use these heaters with flammable materials or in hazardous areas.

Heaters for 5-gallon containers do not open; set containers in from the top.

Heaters for 55-gallon containers close around containers. They are mounted on casters.

For 5-Gallon Containers
For Container Dia.	O'all Ht.	Wattage, W	Watt Density, W/sq. in.	Voltage	Electrical Phase	Current, A	OD	Max. Heat Output, °F	NEMA Style	Cord Lg., ft.	For Surface Material	Housing Material	Insulation Material		Each
60° to 250° F Temp. Control Range
12"	13"	1,350	81	120V AC	Single	15	22"	250°	5-15	8	Metal	Steel	Fiberglass	0000000	000000000
100° to 550° F Temp. Control Range
12"	13"	1,350	81	120V AC	Single	15	22"	550°	5-15	8	Metal	Steel	Fiberglass	0000000	00000000
12"	13"	1,350	81	240V AC	Single	6	22"	550°	L6-20	8	Metal	Steel	Fiberglass	0000000	00000000
For 55-Gallon Containers
60° to 250° F Temp. Control Range
23 3/4"	30 1/2"	1,500	92	120V AC	Single	15	35"	250°	L5-15	8	Metal	Steel	Fiberglass	0000000	00000000
23 3/4"	30 1/2"	4,400	270	240V AC	Three	12	35"	250°	L15-20	8	Metal	Steel	Fiberglass	0000000	00000000
23 3/4"	30 1/2"	4,400	270	480V AC	Three	6	35"	250°	L16-20	8	Metal	Steel	Fiberglass	0000000	00000000
23 3/4"	30 1/2"	4,400	337	240V AC	Single	20	35"	250°	L6-20	8	Metal	Steel	Fiberglass	0000000	00000000
100° to 550° F Temp. Control Range
23 3/4"	30 1/2"	4,400	270	240V AC	Three	12	35"	550°	L15-20	8	Metal	Steel	Fiberglass	000000	00000000
23 3/4"	30 1/2"	4,400	270	480V AC	Three	6	35"	550°	L16-20	8	Metal	Steel	Fiberglass	000000	00000000
23 3/4"	30 1/2"	4,400	337	240V AC	Single	20	35"	550°	L6-20	8	Metal	Steel	Fiberglass	000000	00000000

Heaters for Extrusion- and Injection-Molding Barrels

Heat resins, raw materials, and food with these heaters that fit around extrusion and injection-molding barrels. All require a temperature switch or controller (sold separately) to regulate heat output.

Note: The heater must be sized to fit tightly around the barrel to prevent air gaps that lead to inefficient heating and premature failure.

For technical drawings and 3-D models, click on a part number.

						120V AC, Single Phase			240V AC, Single Phase
For Barrel OD	Wd.	Wattage, W	Max. Heat Output, °F	Wire Connection Type	Material	Current, A		Each	Current, A		Each
With Mica Insulation
3"	1 1/2"	400	900°	Screw Terminals	Steel	3.3	00000000	000000	1.7	00000000	000000
3 1/2"	1 1/2"	500	900°	Screw Terminals	Steel	4.2	00000000	00000	2.1	00000000	00000
3 1/2"	2"	650	900°	Screw Terminals	Steel	5.4	00000000	00000	2.7	00000000	00000
4"	1"	400	900°	Screw Terminals	Steel	3.3	00000000	00000	1.7	00000000	00000
4"	2"	550	900°	Screw Terminals	Steel	4.6	00000000	00000	2.3	00000000	00000
4"	4"	1,250	900°	Screw Terminals	Steel	10.4	00000000	000000	5.2	00000000	000000
4 1/2"	2 1/2"	1,000	900°	Screw Terminals	Steel	8.3	00000000	00000	4.2	00000000	00000
5"	1 1/2"	700	900°	Screw Terminals	Steel	5.8	00000000	00000	2.9	00000000	00000
6"	1 1/2"	850	900°	Screw Terminals	Steel	7.1	00000000	00000	3.5	00000000	00000
6"	2"	1,200	900°	Screw Terminals	Steel	10	00000000	00000	5	00000000	00000
7"	1 1/2"	1,000	900°	Screw Terminals	Steel	8.3	00000000	00000	4.2	00000000	00000
8"	2"	1,500	900°	Screw Terminals	Steel	12.5	00000000	000000	6.3	00000000	000000
9"	1 1/2"	1,200	900°	Screw Terminals	Steel	10	00000000	000000	__	000000	00
9"	1 1/2"	1,800	900°	Screw Terminals	Steel	__	000000	00	5	00000000	000000
10"	1 1/2"	1,300	900°	Screw Terminals	Steel	10.8	00000000	000000	5.4	0000000	000000
12"	2"	1,700	900°	Screw Terminals	Steel	14.2	00000000	000000	__	000000	00
12"	2"	2,300	900°	Screw Terminals	Steel	__	000000	00	7.1	00000000	000000
14"	1 1/2"	1,600	900°	Screw Terminals	Steel	13.3	00000000	000000	__	000000	00
14"	1 1/2"	1,900	900°	Screw Terminals	Steel	__	000000	00	7.9	00000000	000000

Heaters for Nozzles

With Mica Insulation

With Mineral Insulation

Often used with extrusion, injection, and blow-molding machinery, these heaters clamp around nozzles to keep material warm for consistent discharge. They require a temperature switch or controller (sold separately) to regulate heat output.

Heaters with mineral insulation heat up faster than heaters with mica insulation.

Note: The heater must be sized to fit tightly around the barrel to prevent air gaps that lead to inefficient heating and premature failure.

For technical drawings and 3-D models, click on a part number.

				Wire Lead
For Nozzle OD	Wd.	Wattage, W	Max. Heat Output, °F	Lg.	OD	Covering Material	Material	Current, A		Each
120V AC, Single Phase
With Mica Insulation
1"	1"	100	900°	12"	0.08"	Fiberglass	430 Stainless Steel	0.8	00000000	000000
1"	1 1/2"	150	900°	12"	0.08"	Fiberglass	430 Stainless Steel	1.3	00000000	00000
1"	2"	200	900°	12"	0.08"	Fiberglass	430 Stainless Steel	1.7	00000000	00000
1 1/2"	1"	150	900°	12"	0.08"	Fiberglass	430 Stainless Steel	1.3	00000000	00000
1 1/2"	1 1/2"	300	900°	12"	0.08"	Fiberglass	430 Stainless Steel	2.5	00000000	00000
1 1/2"	2"	300	900°	12"	0.08"	Fiberglass	430 Stainless Steel	2.5	00000000	00000
2"	1 1/2"	300	900°	12"	0.08"	Fiberglass	430 Stainless Steel	2.5	00000000	00000
2 1/2"	1 1/2"	350	900°	12"	0.08"	Fiberglass	430 Stainless Steel	2.9	00000000	00000
With Mineral Insulation
1"	1"	150	1200°	12"	0.22"	Stainless Steel	430 Stainless Steel	1.3	00000000	000000
1"	1 1/2"	200	1200°	12"	0.22"	Stainless Steel	430 Stainless Steel	1.7	00000000	000000
1 1/2"	1"	225	1200°	12"	0.22"	Stainless Steel	430 Stainless Steel	1.9	00000000	000000
1 1/2"	1 1/2"	350	1200°	12"	0.22"	Stainless Steel	430 Stainless Steel	2.9	00000000	000000
1 1/2"	2"	400	1200°	12"	0.22"	Stainless Steel	430 Stainless Steel	3.3	00000000	000000
2"	1 1/2"	425	1200°	12"	0.22"	Stainless Steel	430 Stainless Steel	3.5	00000000	000000
2 1/2"	1 1/2"	525	1200°	12"	0.22"	Stainless Steel	430 Stainless Steel	4.4	00000000	000000
240V AC, Single Phase
With Mica Insulation
1"	1"	100	900°	12"	0.08"	Fiberglass	430 Stainless Steel	0.4	00000000	00000
1"	1 1/2"	150	900°	12"	0.08"	Fiberglass	430 Stainless Steel	0.6	00000000	00000
1"	2"	200	900°	12"	0.08"	Fiberglass	430 Stainless Steel	0.8	00000000	00000
1 1/2"	1"	150	900°	12"	0.08"	Fiberglass	430 Stainless Steel	0.6	00000000	00000
1 1/2"	1 1/2"	300	900°	12"	0.08"	Fiberglass	430 Stainless Steel	1.3	00000000	00000
1 1/2"	2"	300	900°	12"	0.08"	Fiberglass	430 Stainless Steel	1.3	00000000	00000
2"	1 1/2"	300	900°	12"	0.08"	Fiberglass	430 Stainless Steel	1.3	00000000	00000
2 1/2"	1 1/2"	350	900°	12"	0.08"	Fiberglass	430 Stainless Steel	1.5	00000000	00000
With Mineral Insulation
1"	1 1/2"	200	1200°	12"	0.22"	Stainless Steel	430 Stainless Steel	0.8	00000000	000000
1 1/2"	1"	225	1200°	12"	0.22"	Stainless Steel	430 Stainless Steel	0.9	00000000	000000
1 1/2"	1 1/2"	350	1200°	12"	0.22"	Stainless Steel	430 Stainless Steel	1.5	00000000	000000
1 1/2"	2"	400	1200°	12"	0.22"	Stainless Steel	430 Stainless Steel	1.7	00000000	000000
2"	1 1/2"	425	1200°	12"	0.22"	Stainless Steel	430 Stainless Steel	1.8	00000000	000000
2 1/2"	1 1/2"	525	1200°	12"	0.22"	Stainless Steel	430 Stainless Steel	2.2	00000000	000000