Also known as band heaters, these wrap around containers to warm contents without direct contact. An adjustable thermostat automatically turns the heater on when the temperature drops below your set temperature and off when it rises above your set temperature. Adjust the set temperature with the dial. The spring-loaded clamp closure allows heaters to expand to fit around slightly larger container diameters. Do not use these heaters with flammable materials or in hazardous areas.

9 1/2" wide heaters maximize surface area contact and heat distribution.

Expansion straps for 9 1/2" wide heaters (not included) allow the heaters to fit around containers 1 1/2" to 11" larger in diameter. Two expansion straps are required for each heater.

Nonstandard-size containers are no problem—use the hook-and-loop closure to adjust these heaters to fit a range of diameters. They wrap around containers to heat contents without direct contact. All require a temperature switch or controller (sold separately) to regulate heat output. Do not use with flammable materials or in hazardous areas.

Also known as heat blankets, these heaters completely surround containers for fast heating and increased heat retention in unheated and drafty areas. Do not use in hazardous areas.

Heaters with an adjustable thermostat automatically turn on when the temperature drops below your set temperature and off when it rises above your set temperature. Adjust the set temperature with the keypad. Those heaters for 56" high containers have an extended frame to fit pump housing, an opening for the pump equipment, and a cover with a flap to insulate the opening. Use them for epoxies, diesel exhaust fluid, water, chemicals, resins, rubber, and other materials with pumping applications.

Heaters without temperature control require a temperature switch or controller (sold separately) for regulating heat output. They have a resettable fuse that opens if the heater temperature rises above the maximum heat output to prevent overheating. Once you set them up, there’s no need to monitor these heaters because they have one consistent, safe temperature. There’s no risk of tampering with the temperature, which could damage containers and their contents. Add insulated expansion strips to make heaters for 22 1/2" dia. containers fit drums with a diameter up to 24.2". They’re also needed for these heaters to fit around drums with removable lids.

Add insulated top covers to reduce heat loss and speed up heating. Covers with a through-port access flap give you easy access and further minimize heat loss.