Handle Style Handle Style |
---|
![]() | ![]() |
Screwdriver | Sliding T |
![]() | ![]() |
Thumb Screw | T |
![]() | |
Pliers |
Clamping Surface Type Clamping Surface Type |
---|
![]() | ![]() |
Fixed | Swivel Pad |
Clamping Surface Material Clamping Surface Material |
---|
|
Holding Capacity Holding Capacity |
---|
|
Handle Finish Handle Finish |
---|
|
Clamping Surface Finish Clamping Surface Finish |
---|
|
Body Finish Body Finish |
---|
|
Pull the lever to slide the clamping arm along the bar; release to lock in place. Use the handle for final tightening.
Opening | ||||||
---|---|---|---|---|---|---|
Max. | Min. | Reach | Holding Capacity, lbs. | Body Material | Each | |
6" | 0" | 3" | 1,000 | Steel | 0000000 | 000000 |
12" | 0" | 3" | 1,000 | Steel | 0000000 | 00000 |
12" | 0" | 5" | 1,200 | Steel | 0000000 | 00000 |
18" | 0" | 3" | 1,000 | Steel | 0000000 | 00000 |
18" | 0" | 5" | 1,200 | Steel | 0000000 | 00000 |
24" | 0" | 3" | 1,000 | Steel | 0000000 | 00000 |
24" | 0" | 5" | 1,200 | Steel | 0000000 | 00000 |
30" | 0" | 3" | 1,000 | Steel | 0000000 | 00000 |
31 1/2" | 0" | 5 1/2" | 1,200 | Steel | 0000000 | 00000 |
36" | 0" | 3" | 1,000 | Steel | 0000000 | 00000 |
39 3/8" | 0" | 5 1/2" | 1,200 | Steel | 0000000 | 00000 |
59" | 0" | 5 1/2" | 1,200 | Steel | 0000000 | 00000 |
The clamping arm slides freely along the bar for quick, one-handed positioning. Tighten the screw onto a workpiece and the arm locks in place. These clamps are also known as F- or L-clamps.
Opening | ||||||
---|---|---|---|---|---|---|
Max. | Min. | Reach | Holding Capacity, lbs. | Body Material | Each | |
4" | 0" | 2 1/4" | 400 | Zinc-Plated Steel | 0000000 | 000000 |
6" | 0" | 4 3/4" | 1,330 | Zinc-Plated Steel | 0000000 | 00000 |
8" | 0" | 5 1/2" | 2,660 | Zinc-Plated Steel | 0000000 | 00000 |
9" | 0" | 5 1/2" | 2,660 | Zinc-Plated Steel | 00000000 | 00000 |
10" | 0" | 4 3/4" | 1,000 | Zinc-Plated Steel | 00000000 | 00000 |
12" | 0" | 5 1/2" | 2,660 | Zinc-Plated Steel | 0000000 | 00000 |
12" | 0" | 8" | 1,700 | Zinc-Plated Steel | 0000000 | 000000 |
16" | 0" | 5 1/2" | 2,660 | Zinc-Plated Steel | 0000000 | 000000 |
18" | 0" | 4 3/4" | 1,980 | Zinc-Plated Steel | 00000000 | 000000 |
20" | 0" | 5 1/2" | 2,660 | Zinc-Plated Steel | 0000000 | 000000 |
24" | 0" | 5 1/2" | 2,660 | Zinc-Plated Steel | 0000000 | 000000 |
24" | 0" | 8" | 1,700 | Zinc-Plated Steel | 0000000 | 000000 |
36" | 0" | 5 1/2" | 2,800 | Zinc-Plated Steel | 0000000 | 000000 |
48" | 0" | 5 1/2" | 2,800 | Zinc-Plated Steel | 0000000 | 000000 |
60" | 0" | 5 1/2" | 2,800 | Zinc-Plated Steel | 0000000 | 000000 |
Each arm slides freely for quick, one-handed positioning. They lock when the screws are tightened onto a workpiece. Reverse the arms to use these clamps as spreaders.
Attach to your bar clamp to hold material on three sides. This adapter fits most standard bar clamps.
For Max. Bar Thick. | Holding Capacity | Body Material | Each | |
1/2" | Not Rated | Powder-Coated Iron | 0000000 | 000000 |
Also known as J-clamps, these provide additional clearance to reach around obstructions and clamp workpieces in recessed areas. The clamping arm slides freely along the bar for quick, one-handed positioning. Use the handle for final tightening.
The matching jaws are ground flat for a firm grip and even pressure when clamping smooth surfaces. The two screws turn independently to make small, individual adjustments to each jaw.
Slide the upper jaw to adjust the opening size. These clamps hold larger workpieces than other locking plier clamps of similar size. Squeeze the handle to lock the clamp and press the release trigger to open it. Turn the adjusting screw to change the angle of the jaws up to 7° to clamp tapered workpieces. The removable plastic pads prevent damage to material.