These include a barrel and a screw.

Pair these screws with a barrel you already have or couple with a different barrel to create a custom fastener. Made from 18-8 stainless steel, they are chemical resistant.

These include a barrel and a screw with an extra-wide (truss) head. Made from 316 stainless steel, they have excellent chemical resistance and can be used in saltwater environments.

These include a barrel and a screw.

Designed with a shoulder for the strength to handle side and shear loads.

Use these hex drive screws and binding barrels as a low-profile alternative to standard nut and bolt combinations.

Stainless steel binding barrels and screws have excellent corrosion resistance in most environments.

One-third the weight of steel, aluminum binding barrels and screws resist corrosion in wet environments.

Brass binding barrels and screws are corrosion resistant in wet environments and electrically conductive.

Plastic binding barrels and caps are chemical resistant, nonconductive, and lightweight.

Angled under the head for a flush finish in countersunk holes.

Install these binding barrels and screws with a standard slotted screwdriver. They require a special tool to remove.

More corrosion resistant than 18-8 stainless steel binding barrels and screws, these have excellent resistance to chemicals and salt water.

Slide the bolt and drop the knob into the notch to secure.

No hands needed—step on the top cap to latch the bolt; retract it by pressing the side release button.

Also known as cane bolts, these latches have the added height that's needed to bridge large vertical gaps. Install them at the top or bottom of swinging doors and gates to hold them in an open or closed position.

The strike has angled ends so these latches can accept their bolt even when doors become misaligned.

Pull the chain-grip to unlatch hard-to-reach doors and panels.

A large handle makes gripping these latches easier than other lift-and-drop barrel padlockable slide-bolt latches.

These padlockable latches are reversible for right- and left-hand mounting.

These padlockable latches are often used on 2" and 3" track to keep garage and other sectional overhead doors closed.

Choose these locks if you need locks that each open with a different key.