Insert your stripped cable into the compression nut and tighten; no crimping or heat is required. Typically used on threaded terminals, they secure to the terminal with a nut (not included). All have universal polarity, so they fit both negative and positive terminals.

When heat is applied, the flux and solder mixture creates a metallic bond with your cable that is nearly twice as strong as crimping or compression connections. Typically used on threaded terminals, these lugs secure to the terminal with a nut (not included). All have universal polarity, so they fit both negative and positive terminals.

For technical drawings and 3-D models, click on a part number.

Tighten the screws to clamp down onto wire. These clamps accommodate a wide range of wire sizes to meet the needs of your application.

Clamps with universal polarity fit both negative and positive terminals.

Side-post clamps attach to internally threaded side terminals.

Tie-bolt clamps tighten around cable for complete wire contact.

For technical drawings and 3-D models, click on a part number.

When heat is applied, the flux and solder mixture creates a metallic bond with your cable that is nearly twice as strong as crimping or compression connections. These clamps secure to unthreaded battery terminals by tightening the included nut and bolt.

For technical drawings and 3-D models, click on a part number.