These abrasives penetrate deep and work fast for rapid and aggressive removal.

Often used as the final step after other media, this type of media is also good for use on fragile parts and won't contaminate nonferrous materials.

Produce a shiny surface on most metals.

This nonabrasive media leaves a very shiny surface.

Often used as the final step after other media to create an extremely shiny finish.

Often used to create bearings, silicon-nitride ceramic is harder than many types of bearing steel but is lightweight and can be easily polished. It also withstands high temperatures.

Also called Pyrex and Schott glass, these glass balls resist clouding and pitting and are highly chemical and heat resistant.

With a diameter that’s held to a close tolerance, this material is hardened for increased wear and abrasion resistance.

The addition of molybdenum gives 316 stainless steel excellent corrosion resistance. Use it in a variety of marine and chemical-processing applications.

Also known as chrome steel, 52100 is an extremely hard and wear-resistant material. These balls are often used in bearings.

Also known as mild steel, use these low-carbon steel balls in parts that don't require high strength.

Hollow construction reduces weight and allows these balls to float.

The most formable brass we offer, 260 offers better weldability than 300 series brass but it’s not as machinable. Sometimes called cartridge brass, it's commonly used for ammunition casings, radiator components, and decorative door hardware.

Grade 5 is the strongest of all the titanium alloys thanks to its higher aluminum and vanadium content. It offers a versatile mix of good corrosion resistance, weldability, and formability.

This S2 tool steel has been hardened for excellent strength and impact resistance. It has a tough core that resists breaking under shock loads.

Add color when making plastic parts.

These pellets resist swelling when exposed to water, making them suitable for use in wet environments. Melt and mold them into desired shapes.

Delrin® acetal resin, also known as acetal homopolymer, is stronger and stiffer than acetal copolymer.

Practically nonabsorbent, HDPE won't swell when exposed to moisture. It is denser and more rigid than LDPE, plus it's more chemical resistant.

Among the strongest plastic materials we offer, Torlon PAI has a slippery surface that resists wear. Use it to make high-friction compressor parts, bearings, and seals.

At only half the weight of glass, polycarbonate maintains excellent impact resistance across a wide temperature range. It's comparable to Lexan, Hyzod, Tuffak, and Makrolon.

Nickel plating gives these magnets good corrosion resistance.

Clean screens in vibrating sifters with the bounce of these balls, or use them as seals in pumps and check valves.

Use these polyurethane balls as seals in pumps and check valves or let them bounce inside of vibrating sifters for an effective screen cleaner. They are made of polyurethane, which combines the shock absorbing qualities of rubber with the strength of plastic.

Safely use these balls in food and pharmaceutical environments to clean screens in vibrating sifters or to act as a seal in pumps and check valves.

Loosen fine particles from the grip of vibrating-sifter screens with the bounce of rubber balls. Also use them as seals in pumps and check valves. They’re made from FDA-listed materials for use with food and beverage.