Attach these clamps to the flange of an beam, then hang a threaded rod from the threaded hole.

Also known as purlin clamps, these clamps are shaped to fit around beams that have a 45° or 90° lip.

For centered load distribution, these clamps grip both sides of the beam and hang threaded rod from the middle.

Suspend material at any angle from the beam. Clamps have a fixed jaw that secures to the beam and a hanger that swivels 360° to position material and accommodate for misalignment.

Support strut channel at a right angle to the beam.

Join two beams in a straight line.

A secure way to hang threaded rod from a pair of angles, such as those used in ceiling joists, without the need to drill or weld. These clamps are commonly used to suspend HVAC, conveyor, and other overhead systems.

Mount these beams across parallel roof joists to hang threaded rod and route pipe, duct, and other overhead systems in areas where there’s no anchoring point.

Attach to a threaded anchor or hole for support and use the loop to secure the suspended material.

Use the twin hooks to suspend items from two points and use the loop to secure the suspended material. For use with cable trays or signs.