Bearing Blocks | McMaster-Carr

Synthetic grease enables these bearings to operate in temperatures up to 400° F—nearly double the maximum temperature of standard mounted ball bearings.

Compact-Base Mounted Ball Bearings

Also known as tapped-base bearings, these ball bearings mount to surfaces from the bottom through threaded holes. Because of their narrow profile, they’re commonly used in tight-clearance spaces, including systems where multiple shafts are mounted close together.

Washdown Compact-Base
Mounted Ball Bearings

Mounting with threaded holes in their base and IP69K certified for washdown environments, these bearings fit in tight spaces and are used in food-, beverage-, pharmaceutical-, and chemical-processing plants. They’re also known as tapped-base mounted ball bearings.

Permanently Lubricated Washdown
Compact-Base Mounted Ball Bearings

These bearings are rated IP69K as able to withstand washdown environments such as food, pharmaceutical, and chemical plants. Their fluoropolymer-coated housing is as corrosion resistant as 304 steel and safe for contact with food.

Mounted Sleeve Bearings

Dry-Running Mounted
Sleeve Bearings

Made from slippery materials, these bearings reduce friction without the oily mess.

Corrosion-Resistant Dry-Running
Mounted Sleeve Bearings

Use these UHMW bearings in wet, corrosive environments.

Dry-Running Mounted Sleeve
Bearings for Extreme Misalignment

These nylon bearings swivel inside their housing to compensate for over 20° of shaft misalignment.

Extreme-Temperature Dry-Running
Mounted Sleeve Bearings

Capable of handling temperatures from -400° to 750° F, these graphalloy bearings withstand the widest temperature range of any of our mounted bearings.

High-Speed Dry-Running
Mounted Sleeve Bearings

Made of acetal blended with PTFE, these bearings handle speeds twice as fast as standard sleeve bearings.

Oil-Embedded Mounted
Sleeve Bearings

Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface.

Vibration-Damping Oil-Embedded
Mounted Sleeve Bearings

With a flexible layer of neoprene sandwiched between an oil-embedded bronze bearing and rigid steel shell, these bearings reduce wear and machinery noise.

High-Speed Oil-Embedded
Mounted Sleeve Bearings

A strong steel housing allows these bearings to handle higher speeds than standard oil-embedded mounted sleeve bearings.

Mounted Sleeve Bearings

A reliable classic—these babbitt bearings are strong and corrosion resistant.

Mounted Roller Bearings

Roller bearings have a thinner profile and larger contact area than ball bearings, making them stronger and more space-efficient than ball bearings.

Mounted Bearings with Two-Bolt Flange

Mounted Ball Bearings
with Two-Bolt Flange

Ball bearings operate with less friction than other bearings, so you can run them at higher speeds.

Low-Profile Mounted Ball
Bearings with Two-Bolt Flange

Designed with a thin, compact housing, these bearings are good for space-constrained applications.

Light Duty Mounted Ball
Bearings with Two-Bolt Flange

Use these bearings for light loads and small shafts. The closed backing blocks out dust and other contaminants.

Ultra-Corrosion-Resistant Mounted
Ball Bearings with Two-Bolt Flange

Use these bearings in corrosive environments and under water.

Food Industry Mounted Ball
Bearings with Two-Bolt Flange

The lubricant in these mounted ball bearings is suitable for incidental contact with food.

High-Temperature Mounted Ball
Bearings with Two-Bolt Flange

Synthetic grease enables these bearings to operate in temperatures up to 400° F—nearly double the maximum temperature of standard mounted ball bearings with two-bolt flange.

High-Speed Mounted Ball
Bearings with Two-Bolt Flange

These bearings have the highest speed ratings of any mounted ball bearing in our offering.

Dry-Running Mounted Sleeve
Bearings with Two-Bolt Flange

Embedded lubricant particles increase the load capacity of these bearings while also making them slippery.

Light Duty Dry-Running Mounted
Sleeve Bearings with Two-Bolt Flange

Use these nylon or acetal bearings for light loads. The closed backing blocks out dust and other contaminants.

Food Industry Dry-Running Mounted
Sleeve Bearings with Two-Bolt Flange

Made of FDA listed PEEK, these bearings are suitable for direct contact with food. The closed backing blocks out dust and other contaminants.

Extreme-Temperature
Dry-Running Mounted Sleeve
Bearings with Two-Bolt Flange

Capable of handling temperatures from -400° to 750° F, these graphalloy bearings have the widest temperature range of any of our mounted bearings.

High-Speed Dry-Running Mounted
Sleeve Bearings with Two-Bolt Flange

Handling speeds twice as fast as standard mounted sleeve bearings while limiting wear on your system, these bearings are made of PTFE-filled acetal.

High-Speed Light Duty
Dry-Running Mounted Sleeve
Bearings with Two-Bolt Flange

Made of acetal with a PTFE filling, these light duty bearings handle speeds twice as fast as standard acetal bearings can.

Oil-Embedded Mounted Sleeve
Bearings with Two-Bolt Flange

Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface.

Mounted Roller Bearings
with Two-Bolt Flange

These roller bearings handle extremely high speeds for their small size.

Mounted Bearings with Four-Bolt Flange

Mounted Ball Bearings
with Four-Bolt Flange

A bolt in each corner makes for a secure, even hold.

Food Industry Mounted Ball
Bearings with Four-Bolt Flange

The lubricant in these mounted ball bearings is suitable for incidental contact with food.

High-Speed Mounted Ball
Bearings with Four-Bolt Flange

These bearings have the highest speed ratings of any mounted ball bearing in our offering.

Ultra-Corrosion-Resistant Mounted
Ball Bearings with Four-Bolt Flange

Use these bearings in corrosive environments and under water.

High-Temperature Mounted Ball
Bearings with Four-Bolt Flange

Synthetic grease enables these bearings to operate in temperatures up to 400° F—nearly double the maximum temperature of standard mounted ball bearings with four-bolt flange.

Mounted Roller Bearings
with Four-Bolt Flange

The tapered rollers in these bearings support large shafts at high static loads.

Mounted Sleeve Bearings
with Four-Bolt Flange

With no moving parts, sleeve bearings are better for dirty environments than ball and roller bearings.

Mounted Bearings with Three-Bolt Flange

Mounted Bearings
with Three-Bolt Flange

With all three mounting holes on one side, you can position the bearing above or below the mounting surface.

Insert Bearings

Swap out worn inserts instead of replacing the entire mounted unit.

Thread-Mount Bearings

Combine with threaded pipe to mount these bearings in a variety of positions without the need for a flat mounting surface.

Bearing Housings

Use one of these base-mount housings with your own bearing to create a custom mounted bearing.

Bearing Housings
with Two-Bolt Flange

Create a custom mounted bearing by adding your own bearing to these flanged housings.

Ready-Mount Bearing Housings

Mount bearings quickly by using these precision housings, which don’t require any machining.

Ready-Mount Bearing
Housings with Two-Bolt Flange

Quickly mount bearings in these precision-flanged housings, no machining required.

Mounted Linear Bearings

Mounted Linear Ball Bearings

Choose ball bearings for debris-free environments and when speed is a necessity. They operate with less friction than sleeve bearings, so you can run them at higher speeds.

High-Load Mounted
Linear Ball Bearings

Designed to handle heavy loads, these bearings have the highest load capacities of any mounted linear ball bearings we offer.

Adjustable Mounted
Linear Ball Bearings

Use the adjustment screw in the housing to tighten or loosen the snugness (also known as preload) of the bearing to your shaft.

Corrosion-Resistant Mounted
Linear Ball Bearings

Outdoor as well as mild chemical environments are no problem for these bearings. They have stainless steel balls for corrosion resistance.

Mounted Linear Sleeve Bearings

Virtually maintenance free, these bearings have slippery, chemical-resistant liners that don't require added lubrication.

Sleeve Bearing Blocks for
Washdown Environments

Made from a single piece of slippery UHMW plastic, these bearings have no cracks or crevices so they’re easy to clean.

High-Speed Mounted
Linear Sleeve Bearings

A ceramic coating makes high speeds as well as rapid acceleration and deceleration possible.

Frictionless-Motion Mounted
Linear Air Bearings

Float bearings on air for precise, frictionless movement. Unlike traditional bearings that can wear your shaft down, these bearings are suspended using pressurized air for linear and rotary motion.

Flange-Mounted Linear Ball Bearings

The flanged housing makes these bearings a good solution for vertical linear motion applications.

Corrosion-Resistant Flange-Mounted
Linear Ball Bearings

The shell, housing, and balls of these bearings are stainless steel for excellent corrosion resistance.

High-Speed Flange-Mounted
Linear Sleeve Bearings

A ceramic coating makes high speeds as well as rapid acceleration and deceleration possible.

Chemical-Resistant Flange-Mounted
Linear Sleeve Bearings

The Frelon liner on these bearings allows them to stand up to a wider range of chemicals than other flange-mounted linear sleeve bearings.

Mounted Linear Bearings for Support Rail Shafts

High-Load Mounted Linear Ball
Bearings for Support Rail Shafts

Designed to handle heavy loads, these bearings have higher load capacities than comparable standard mounted linear ball bearings for support rail shafts.

Mounted Linear Ball Bearings
for Support Rail Shafts

Mount these bearings on a support rail shaft for applications requiring maximum rigidity.

Corrosion-Resistant Mounted Linear
Ball Bearings for Support Rail Shafts

Outdoor as well as mild chemical environments are no problem for these bearings. They have stainless steel balls for corrosion resistance.

Mounted Linear Sleeve
Bearings for Support Rail Shafts

Virtually maintenance free, these bearings have slippery, chemical-resistant liners that don't require added lubrication.

High-Speed Mounted Linear Sleeve
Bearings for Support Rail Shafts

A ceramic coating makes high speeds as well as rapid acceleration and deceleration possible.

High-Load Mounted Linear Sleeve
Bearings for Support Rail Shafts

With two bearings mounted in one housing, these sleeve bearings withstand heavy loads. Use them on round support rail shafts for applications that require maximum rigidity.

Mounted Linear Bearings for Spline Shafts

Mounted Linear Bearings
for Spline Shafts

A flanged housing with mounting holes connects these bearings directly to your system. They have a grooved inner diameter that's designed to work with spline shafts. Together, they transmit rotary power while allowing the bearing to move freely along the length of the shaft.

Linear Bearing Housings

Slide up to two linear ball or sleeve bearings into these housings and secure them with the included internal retaining rings.

Flange-Mounted Linear
Bearing Housings

Slide up to two linear ball or sleeve bearings into these housings and secure them with the included internal retaining rings.

Linear Bearings

Linear Ball Bearings

Use ball bearings in debris-free environments and when speed is a necessity. They operate with less friction than sleeve bearings, so you can run them at higher speeds.

Linear and Rotary Ball Bearings

Engineered for simultaneous linear and rotary motion, these bearings are used with round end-supported shafts.

High-Temperature
Linear Ball Bearings

The choice for low-friction motion in high-temperature environments.

High-Load Linear Ball Bearings

Designed to handle heavy loads, these bearings have higher load capacities than comparable standard linear ball bearings.

Dust-Resistant Linear
Sleeve Bearings

Ridges on the inside of these bearings wipe away dust and debris as the bearing travels on a shaft.

Food Industry Linear Sleeve Bearings

Made of FDA-listed materials for use in food applications, these bearings also have excellent chemical and corrosion resistance.

Linear Sleeve Bearings

Because they usually do not require lubrication, linear sleeve bearings outperform linear ball bearings in dirty environments.

Electrical-Insulating
Linear Sleeve Bearings

These fiberglass bearings are lightweight, nonmagnetic, and won’t conduct electricity.

High-Speed Linear Sleeve Bearings

A ceramic coating makes high speeds as well as rapid acceleration and deceleration possible.

Linear Ball Bearings
for Support Rail Shafts

Ball bearings create less friction than sleeve bearings, so they require less force to operate.

High-Load Linear Ball Bearings
for Support Rail Shafts

Designed to handle heavy loads, these bearings have higher load capacities than comparable standard linear ball bearings for support rail shafts.

High-Temperature Linear Ball
Bearings for Support Rail Shafts

The choice for low-friction motion in high-temperature environments.

Linear Sleeve Bearings
for Support Rail Shafts

Sleeve bearings outperform ball bearings in dirty environments. Use them for low speed applications.

Food Industry Linear Sleeve
Bearings for Support Rail Shafts

Made of FDA-listed materials for use in food applications, these bearings also have excellent chemical and corrosion resistance.

Linear Bearings for Spline Shafts

With a grooved inner diameter, these bearings are designed to work with splined shafts. Together, they transmit rotary power while allowing the bearing to move freely along the length of the shaft. All are for use where shaft misalignment is unlikely.

Ball Bearing Carriages and Guide Rails

Ball Bearing Carriages
and Guide Rails

These carriages and guide rails are steel.

Corrosion-Resistant Ball Bearing
Carriages and Guide Rails

Made of stainless steel, these carriages and guide rails are more corrosion resistant than steel carriages and guide rails.

Horizontal-Mount Ball Bearing
Carriages and Guide Rails

Designed specifically for use on horizontal surfaces, the contact angle of the ball bearings on the rail allows these carriages to last longer than other carriages.

Maintenance-Free Ball Bearing
Carriages and Guide Rails

These carriages and guide rails are steel.

Corrosion-Resistant
Maintenance-Free Ball
Bearing Carriages and Guide Rails

Made of stainless steel, these carriages and guide rails are more corrosion resistant than steel carriages and guide rails.

Horizontal-Mount Quiet-Ride Ball
Bearing Carriages and Guide Rails

Designed for use on horizontal surfaces, the contact angle of the ball bearings on the rail allows these carriages to last longer than other carriages.

High-Cycle Ball Bearing
Carriages and Guide Rails

A plastic cage surrounds the ball bearings and keeps them from colliding, so these carriages run for many cycles without needing maintenance.

Clean Room Ball Bearing
Carriages and Guide Rails

Suitable for clean room use, these carriages and guide rails are made entirely of stainless steel.

Miniature Ball Bearing
Carriages and Guide Rails

These tiny carriages and guide rails are sized for electronic and other precision applications.

Extra-Wide Ball Bearing
Carriages and Guide Rails

With a wide base and low-profile design, these carriages and guide rails stabilize moment (twisting) and off-center loads better than other carriages and rails. They're good for use in areas where multiple carriages or rails won't fit.

High-Cycle Extra-Wide Ball
Bearing Carriages and Guide Rails

With a plastic cage that surrounds the ball bearings to prevent them from colliding, these extra-wide carriages run quietly for many cycles without needing maintenance. All of these carriages have a wide base and low-profile design to stabilize moment (twisting) and off-center loads better than other carriages.

High-Cycle Low-Profile Ball
Bearing Carriages and Guide Rails

Run many cycles in tight spaces before replacing or re-greasing carriages.

Side-Mount Ball Bearing
Carriages and Guide Rails

Mount to vertical surfaces for applications where tight tolerances aren't required.

Sleeve Bearing Carriages and Guide Rails

Sleeve Bearing Carriages
and Guide Rails

With fewer moving parts and no need for lubrication, sleeve bearing carriages perform better in dusty and wet environments than ball and roller bearing carriages. They're also better at handling impact and vibration.

High-Temperature Sleeve Bearing
Carriages and Guide Rails

Use these carriages and guide rails in temperatures up to 300° F.

Locking Sleeve Bearing
Carriages and Guide Rails

A handle on the side of the carriage locks the carriage in place.

Locking Extra-Wide Sleeve
Bearing Carriages and Guide Rails

A handle on the side of the carriage locks the carriage in place.

Square Sleeve Bearing
Carriages and Guide Rails

The square profile prevents loads from twisting and rotating.

Extra-Wide Sleeve Bearing
Carriages and Guide Rails

With a wide base, these sleeve bearing carriages stabilize moment (twisting) and off-center loads better than standard carriages. Use in areas where multiple carriages or rails won't fit.

Low-Profile Sleeve Bearing
Carriages and Guide Rails

For applications with low clearance, these carriages protrude less than 5 mm above their rails.

Heavy Duty Sleeve Bearing
Carriages for T-Slotted Framing

Threaded inserts secure the bearing to the carriage and prevent it from loosening due to frequent starts and stops.

Sleeve Bearing Carriages
for T-Slotted Framing

Mate with a T-slotted rail to add linear motion to your assembly.

Heavy Duty Side-Mount Sleeve
Bearing Carriages
for T-Slotted Framing

Threaded inserts secure the bearing to the carriage and prevent it from loosening due to frequent starts and stops.

Side-Mount Sleeve Bearing
Carriages for T-Slotted Framing

Fasten loads on the side of these carriages and add linear motion to a T-slot assembly.

Side-Mount Sleeve Bearing
Carriages and Guide Rails

C-shaped guide rails grip the carriage around the outside to support linear motion along walls and other vertical surfaces.

Track Roller Carriages and Guide Rails

High-Load Track Roller
Carriages and Guide Rails

Needle-roller bearings give these track roller carriages higher load capacities than other track roller carriages.

Side-Mount Track Roller
Carriages for T-Slotted Framing

Combine with a T-slotted rail to add linear motion to your assembly.

Locking High-Load Track Roller
Carriages and Guide Rails

A handle on the side of the carriage locks the carriage in place.

Light Duty Track Roller
Carriages and Guide Rails

Nylon rollers provide low-friction movement for light loads and corrosive environments.

High-Temperature Track Roller
Carriages and Guide Rails

High-temperature PTFE-thickened grease enables these carriages to operate in temperatures up to 500° F, higher than any other carriage that we offer.

Track Roller Carriages
and Guide Rails

V-shaped rollers and rails allow these carriages to operate well in dirty environments because the debris won't get trapped on the rail.

Side-Mount Track Roller
Carriages and Guide Rails

Mount along a wall or other vertical surface.

Corrosion-Resistant Side-Mount Track
Roller Carriages and Guide Rails

These track roller carriages and guide rails are stainless steel for use in wet, corrosive environments.

Self-Aligning Side-Mount Track
Roller Carriages and Guide Rails

Create a self-aligning carriage and guide rail system to compensate for mounting surfaces that aren't parallel.

Light Duty Side-Mount Track
Roller Carriages and Guide Rails

Use these carriages and guide rails for light loads where precise movement is not required.

Roller Bearing Carriages and Guide Rails

Roller Bearing Carriages
and Guide Rails

Roller bearing carriages handle heavier loads than ball bearing and track roller carriages.

Track Rollers and Guide Rails

Corrosion-Resistant Track
Rollers and Guide Rails

Made of stainless steel, these track rollers and guide rails are more corrosion resistant than steel rollers and rails.

Track Rollers and Guide Rails

These steel track rollers and guide rails support loads up to 300 lbs.

Light Duty Track
Rollers and Guide Rails

Nylon rollers and aluminum rails make these good for light duty applications.

Positioning Slides

High-Load Positioning Slides

Made with Frelon bearings, these slides have over four times the load capacity of standard positioning slides.

Positioning Slides

Use these slides in a variety of manual-positioning applications for laboratory and production equipment as well as for positioning parts for drilling, fastening, assembly, and measuring.

Precision Positioning Slides

A linear scale and micrometer-like hand wheel measure travel distance in increments of 0.001".

Locking Positioning
Tables with Micrometer

A thumb screw locks the slide to prevent movement in systems where vibration is present.

Positioning Tables with Micrometer

A micrometer handle ensures accurate, repeatable positioning along a single axis—good for positioning parts, such as measuring and inspecting equipment, that are part of a larger automated system.

Locking Two-Axis Positioning
Tables with Micrometers

A thumb screw locks the slide to prevent movement in systems where vibration is present.

Three-Axis Positioning
Tables with Micrometers

Three micrometer handles ensure accurate, repeatable positioning along three axes—good for positioning parts, such as measuring and inspecting equipment, that are part of a larger automated system.

Two-Axis Positioning
Tables with Micrometers

Two micrometer handles ensure accurate, repeatable positioning along two axes—good for positioning parts, such as measuring and inspecting equipment, that are part of a larger automated system.

Motor-Mount Positioning Slides

Connect to an electric motor with the included NEMA mounting flange.

Telescoping Slides

High-Load Low-Friction
Telescoping Slides

With a row of crossed-roller bearings on each side of the rail, these slides have over twice the load capacity of standard low-friction slides and are better for handling shock loads.

Low-Friction Telescoping Slides

Slides have a row of ball bearings on each side of the rail.

Telescoping Slides

Good for use in pick-and-place applications, machine tool doors, and telescopic press arms, these rugged slides are designed to carry heavy loads.

Telescoping Rail Sets

Create your own positioning table or telescoping slide. Sets include four rails, two roller bearing cages, and eight end stops.

End Supports for Lead Screws and Ball Screws

End Supports for Lead
Screws and Ball Screws

A set of ball bearings reduces friction and secures the end of a ball or lead screw.

Metric End Supports for Lead
Screws and Ball Screws

A set of ball bearings reduces friction and secures the end of a metric ball or lead screw.

Air Slides

Rodless Air Slides

With no external moving parts, these air slides provide a long stroke, but have a static footprint—only the carriage on top moves.

Air Slides

Convenient for use with devices such as grippers and printing heads, these air slides have a nonrotating head that provides steady motion and a large mounting area.

Positioning Slides for Universal Robots

Positioning Slides
for Universal Robots

Extend the horizontal reach of your Universal Robots arm to operate your robot at multiple positions along an assembly line, or transport workpieces from a conveyor to your CNC.

Terms and Conditions and Privacy Policy

Shoulder Screws

Carriage Bolts

Mounted Ball Bearings

Mounted Ball Bearings

Low-Profile Mounted Ball Bearings

Permanently LubricatedMounted Ball Bearings

Ultra-Corrosion-ResistantMounted Ball Bearings

Food Industry Mounted Ball Bearings

High-Speed Mounted Ball Bearings

High-TemperatureMounted Ball Bearings

Compact-Base Mounted Ball Bearings

Washdown Compact-BaseMounted Ball Bearings

Permanently Lubricated WashdownCompact-Base Mounted Ball Bearings

Mounted Sleeve Bearings

Dry-Running MountedSleeve Bearings

Corrosion-Resistant Dry-RunningMounted Sleeve Bearings

Dry-Running Mounted SleeveBearings for Extreme Misalignment

Extreme-Temperature Dry-RunningMounted Sleeve Bearings

High-Speed Dry-RunningMounted Sleeve Bearings

Oil-Embedded MountedSleeve Bearings

Vibration-Damping Oil-EmbeddedMounted Sleeve Bearings

High-Speed Oil-EmbeddedMounted Sleeve Bearings

Mounted Sleeve Bearings

Mounted Roller Bearings

Mounted Roller Bearings

Mounted Bearings with Two-Bolt Flange

Mounted Ball Bearingswith Two-Bolt Flange

Low-Profile Mounted BallBearings with Two-Bolt Flange

Light Duty Mounted BallBearings with Two-Bolt Flange

Ultra-Corrosion-Resistant MountedBall Bearings with Two-Bolt Flange

Food Industry Mounted BallBearings with Two-Bolt Flange

High-Temperature Mounted BallBearings with Two-Bolt Flange

High-Speed Mounted BallBearings with Two-Bolt Flange

Dry-Running Mounted SleeveBearings with Two-Bolt Flange

Light Duty Dry-Running MountedSleeve Bearings with Two-Bolt Flange

Food Industry Dry-Running MountedSleeve Bearings with Two-Bolt Flange

Extreme-TemperatureDry-Running Mounted Sleeve Bearings with Two-Bolt Flange

High-Speed Dry-Running MountedSleeve Bearings with Two-Bolt Flange

High-Speed Light DutyDry-Running Mounted Sleeve Bearings with Two-Bolt Flange

Oil-Embedded Mounted SleeveBearings with Two-Bolt Flange

Mounted Roller Bearingswith Two-Bolt Flange

Mounted Bearings with Four-Bolt Flange

Mounted Ball Bearingswith Four-Bolt Flange

Food Industry Mounted BallBearings with Four-Bolt Flange

High-Speed Mounted BallBearings with Four-Bolt Flange

Ultra-Corrosion-Resistant MountedBall Bearings with Four-Bolt Flange

High-Temperature Mounted BallBearings with Four-Bolt Flange

Mounted Roller Bearingswith Four-Bolt Flange

Mounted Sleeve Bearingswith Four-Bolt Flange

Mounted Bearings with Three-Bolt Flange

Mounted Bearingswith Three-Bolt Flange

Insert Bearings

Insert Bearings

Thread-Mount Bearings

Thread-Mount Bearings

Bearing Housings

Bearing Housings

Bearing Housingswith Two-Bolt Flange

Ready-Mount Bearing Housings

Ready-Mount BearingHousings with Two-Bolt Flange

Mounted Linear Bearings

Mounted Linear Ball Bearings

High-Load MountedLinear Ball Bearings

Adjustable MountedLinear Ball Bearings

Corrosion-Resistant MountedLinear Ball Bearings

Mounted Linear Sleeve Bearings

Sleeve Bearing Blocks forWashdown Environments

High-Speed MountedLinear Sleeve Bearings

Frictionless-Motion MountedLinear Air Bearings

Flange-Mounted Linear Ball Bearings

Corrosion-Resistant Flange-MountedLinear Ball Bearings

High-Speed Flange-MountedLinear Sleeve Bearings

Chemical-Resistant Flange-MountedLinear Sleeve Bearings

Mounted Linear Bearings for Support Rail Shafts

High-Load Mounted Linear BallBearings for Support Rail Shafts

Mounted Linear Ball Bearingsfor Support Rail Shafts

Corrosion-Resistant Mounted LinearBall Bearings for Support Rail Shafts

Mounted Linear SleeveBearings for Support Rail Shafts

High-Speed Mounted Linear SleeveBearings for Support Rail Shafts

High-Load Mounted Linear SleeveBearings for Support Rail Shafts

Mounted Linear Bearings for Spline Shafts

Mounted Linear Bearingsfor Spline Shafts

Permanently Lubricated
Mounted Ball Bearings

Ultra-Corrosion-Resistant
Mounted Ball Bearings

High-Temperature
Mounted Ball Bearings

Washdown Compact-Base
Mounted Ball Bearings

Permanently Lubricated Washdown
Compact-Base Mounted Ball Bearings

Dry-Running Mounted
Sleeve Bearings

Corrosion-Resistant Dry-Running
Mounted Sleeve Bearings

Dry-Running Mounted Sleeve
Bearings for Extreme Misalignment

Extreme-Temperature Dry-Running
Mounted Sleeve Bearings

High-Speed Dry-Running
Mounted Sleeve Bearings

Oil-Embedded Mounted
Sleeve Bearings

Vibration-Damping Oil-Embedded
Mounted Sleeve Bearings

High-Speed Oil-Embedded
Mounted Sleeve Bearings

Mounted Ball Bearings
with Two-Bolt Flange

Low-Profile Mounted Ball
Bearings with Two-Bolt Flange

Light Duty Mounted Ball
Bearings with Two-Bolt Flange

Ultra-Corrosion-Resistant Mounted
Ball Bearings with Two-Bolt Flange

Food Industry Mounted Ball
Bearings with Two-Bolt Flange

High-Temperature Mounted Ball
Bearings with Two-Bolt Flange

High-Speed Mounted Ball
Bearings with Two-Bolt Flange

Dry-Running Mounted Sleeve
Bearings with Two-Bolt Flange

Light Duty Dry-Running Mounted
Sleeve Bearings with Two-Bolt Flange

Food Industry Dry-Running Mounted
Sleeve Bearings with Two-Bolt Flange

Extreme-Temperature
Dry-Running Mounted Sleeve
Bearings with Two-Bolt Flange

High-Speed Dry-Running Mounted
Sleeve Bearings with Two-Bolt Flange

High-Speed Light Duty
Dry-Running Mounted Sleeve
Bearings with Two-Bolt Flange

Oil-Embedded Mounted Sleeve
Bearings with Two-Bolt Flange

Mounted Roller Bearings
with Two-Bolt Flange

Mounted Ball Bearings
with Four-Bolt Flange

Food Industry Mounted Ball
Bearings with Four-Bolt Flange

High-Speed Mounted Ball
Bearings with Four-Bolt Flange

Ultra-Corrosion-Resistant Mounted
Ball Bearings with Four-Bolt Flange

High-Temperature Mounted Ball
Bearings with Four-Bolt Flange

Mounted Roller Bearings
with Four-Bolt Flange

Mounted Sleeve Bearings
with Four-Bolt Flange

Mounted Bearings
with Three-Bolt Flange

Bearing Housings
with Two-Bolt Flange

Ready-Mount Bearing
Housings with Two-Bolt Flange

High-Load Mounted
Linear Ball Bearings

Adjustable Mounted
Linear Ball Bearings

Corrosion-Resistant Mounted
Linear Ball Bearings

Sleeve Bearing Blocks for
Washdown Environments

High-Speed Mounted
Linear Sleeve Bearings

Frictionless-Motion Mounted
Linear Air Bearings

Corrosion-Resistant Flange-Mounted
Linear Ball Bearings

High-Speed Flange-Mounted
Linear Sleeve Bearings

Chemical-Resistant Flange-Mounted
Linear Sleeve Bearings

High-Load Mounted Linear Ball
Bearings for Support Rail Shafts

Mounted Linear Ball Bearings
for Support Rail Shafts

Corrosion-Resistant Mounted Linear
Ball Bearings for Support Rail Shafts

Mounted Linear Sleeve
Bearings for Support Rail Shafts

High-Speed Mounted Linear Sleeve
Bearings for Support Rail Shafts

High-Load Mounted Linear Sleeve
Bearings for Support Rail Shafts

Mounted Linear Bearings
for Spline Shafts

Flange-Mounted Linear
Bearing Housings

High-Temperature
Linear Ball Bearings

Dust-Resistant Linear
Sleeve Bearings

Electrical-Insulating
Linear Sleeve Bearings

Linear Ball Bearings
for Support Rail Shafts

High-Load Linear Ball Bearings
for Support Rail Shafts

High-Temperature Linear Ball
Bearings for Support Rail Shafts

Linear Sleeve Bearings
for Support Rail Shafts

Food Industry Linear Sleeve
Bearings for Support Rail Shafts

Ball Bearing Carriages
and Guide Rails

Corrosion-Resistant Ball Bearing
Carriages and Guide Rails

Horizontal-Mount Ball Bearing
Carriages and Guide Rails

Maintenance-Free Ball Bearing
Carriages and Guide Rails

Corrosion-Resistant
Maintenance-Free Ball
Bearing Carriages and Guide Rails

Horizontal-Mount Quiet-Ride Ball
Bearing Carriages and Guide Rails

High-Cycle Ball Bearing
Carriages and Guide Rails

Clean Room Ball Bearing
Carriages and Guide Rails

Miniature Ball Bearing
Carriages and Guide Rails

Extra-Wide Ball Bearing
Carriages and Guide Rails

High-Cycle Extra-Wide Ball
Bearing Carriages and Guide Rails

High-Cycle Low-Profile Ball
Bearing Carriages and Guide Rails

Side-Mount Ball Bearing
Carriages and Guide Rails

Sleeve Bearing Carriages
and Guide Rails

High-Temperature Sleeve Bearing
Carriages and Guide Rails

Locking Sleeve Bearing
Carriages and Guide Rails

Locking Extra-Wide Sleeve
Bearing Carriages and Guide Rails