Offering excellent antifriction qualities, 932 bronze also offers good strength and wear resistance. It's also known as SAE 660 and is often used for bearings, bushings, and thrust washers.

These rods are precision ground for a tight diameter tolerance of ±0.0005".

The thickness and width are oversized to allow for finishing.

Powdered bronze is pressed and then impregnated with SAE 30 oil to make this material self-lubricating.

An excellent alternative to oil-filled bronze, graphite-filled bronze provides dry lubrication in temperatures as high as 700° F.

Thickness and width are oversized to allow for finishing.

954 bronze contains a minimum of 10% aluminum for strength and weldability. It is also known as aluminum bronze. It's widely used for bearings, bushings, valve bodies, and worm gears.

Frequently called manganese brass, 863 bronze can handle heavy loads and high speeds when properly lubricated.

Frequently called manganese brass, 863 bronze can handle heavy loads and high speeds when properly lubricated. These bars are a higher-strength alternative to tight-tolerance 954 bearing bronze bars.

An easier-to-machine alternative to 932 bronze, 936 also has better corrosion resistance. It's also called modified SAE 64.

An easier-to-machine alternative to 932 bronze, 936 also has better corrosion resistance. It's also called modified SAE 64.

Also known as chrome-moly steel, these 4130 alloy steel round tubes have low carbon content for good weldability. They’re often used for roll cages and frames.

The diameter of these balls is held to a precise tolerance. They’re made from 52100 alloy steel, also known as chrome steel, which has high levels of carbon and chromium to make them extremely hard and resistant to wear.

Also known as chrome steel, 52100 is an extremely hard and wear-resistant material. It’s used for parts such as bearings, bushings, and punches.

With a diameter that’s held to a close tolerance, this material is hardened for increased wear and abrasion resistance.

440A stainless steel resists damage from impact and abrasion. It's often used for cutlery and valve components.

Lighter in weight than steel and stronger than plastic, these aluminum balls are widely used as bearings and in valves.

Comparable to Hastelloy C276, these balls resist corrosion from harsh chemicals, such as nitric acid, sulfuric acid, and hydrochloric acid. They’re often used in bearings and valves. This nickel alloy resists chloride pitting better than stainless steel, and it’s more corrosion resistant than nickel K500.