120 mm Housing ID Bearings

Smoother than smooth—the balls inside these bearings roll nearly friction-free. You’ll often find them on rapidly rotating parts, from the whirring chuck on a power drill to the spinning shaft on an electric motor.

Open—With no rubber seal to block airflow, these bearings dissipate heat quickly, extending the life of the lubricant and reducing friction over time.

Shielded—The balls are covered just enough to keep out large particles while allowing air to pass through and dissipate heat.

Sealed—The best choice for dirty environments. A barrier seals out dust so it won't gunk up or wear down the balls. However, these bearings retain the most heat since air can't flow through.

Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.

Corrosion-Resistant 440C Stainless Steel—Combine the strength of steel with the corrosion resistance of stainless steel. These bearings won't degrade from water or mild chemicals, such as the ammonia in cleaning solutions. However, they'll weaken when exposed to salt water and harsh chemicals, such as bleach.

ABEC Rating—Bearings with an ABEC rating meet industry tolerance standards established by the Annular Bearing Engineers Committee (ABEC). They're rated on a scale from 1 to 9. The higher the rating, the tighter the tolerance. Bearings rated ABEC 1 or 3 are precise enough for most applications. If your application consistently runs at high speeds or requires high accuracy, consider bearings rated ABEC 5 or higher, since they generate less friction and heat.

							Temp. Range, ° F
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	ABEC Rating	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Min.	Max.	Inner Ring Type	Bearing Trade No.		Each
Open







				Steel

				55	120	29	1	17,100	8,500	-20	230	Standard	6311	00000000	000000


				85	120	18	1	7,150	6,300	-50	130	Standard	6917	00000000	000000


				Shielded







								Steel

								55	120	29	1	16,000	5,600	-20	230	Standard	6311-2Z	00000000	00000


								55	120	29	3	16,650	6,300	-20	230	Standard	6311-2Z	0000000	000000
								65	120	23	3	13,150	6,000	-20	230	Standard	6213-2Z	0000000	000000


								Sealed







												Steel

												55	120	29	1	17,100	3,500	-20	230	Standard	6311-2RS	0000000	00000


												55	120	29	3	16,650	3,800	-30	210	Standard	6311-2RS	0000000	000000
												65	120	23	3	13,150	3,600	-30	210	Standard	6213-2RS	0000000	000000




														Corrosion-Resistant 440C Stainless Steel

														55	120	29	1	16,100	3,500	-20	210	Standard	6311-2RS	00000000	000000


														65	120	23	1	12,900	3,500	-20	210	Standard	6213-2RS	00000000	000000

High-Load Face-Mount Crossed-Roller Bearings

With thicker inner and outer raceways, these bearings can handle heavier loads than thin-profile crossed roller bearings. Mounting holes on the inner and outer rings allow for fastening onto hollow joints and shafts. The rollers face in alternating directions to allow for rigid, accurate motion under any combination of radial, thrust, and moment (twisting) loads. Use in applications where highly accurate motion is necessary, such as machine tools and industrial robots.

Open Bearing—Open bearings dissipate heat more efficiently than sealed bearings.

Sealed Bearing—Sealed bearings block out dust and other contaminants better than open bearings, but retain more heat.

				Combined Load Cap., lbf
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	Dynamic	Static	Max. Rotation Speed, rpm	Lubrication	Temp. Range, ° F	Features		Each
For Combined Radial, Thrust, and Moment Load—Open with Steel Ring



		55	120	15	4,500	6,200	850	Required	0 to 230	Lubrication Groove, Two Lubrication Holes	0000000	0000000


		For Combined Radial, Thrust, and Moment Load—Sealed with Steel Ring



				55	120	15	4,500	6,200	650	Lubricated	0 to 210	Lubrication Groove, Two Lubrication Holes	0000000	000000

Self-Aligning Ball Bearings

Open

Misalignments correct themselves on the fly in these bearings. Two rows of balls have separate raceways in the inner ring and a shared raceway in the outer ring, so the balls rock back and forth to compensate for misalignment. This construction also reduces noise and vibration.

Open—With no rubber seal to block airflow, these bearings dissipate heat quickly, extending the life of the lubricant and reducing friction over time.

Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.

								Temp. Range
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	ABEC Rating	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Misalignment Capability	Min.	Max., ° F	Inner Ring Type	Bearing Trade No.		Each
Open







				Steel

				55	120	43	1	17,150	4,800	4°	Not Rated	210	Standard	2311	00000000	0000000


				65	120	31	1	9,750	4,800	4°	Not Rated	210	Standard	2213	00000000	000000

Spherical-Roller Bearings

Two rows of rollers give these bearings dynamic radial load capacities over five times higher than comparably sized tapered-roller bearings. Also known as rock crusher bearings, they handle heavy shock loads and are used for metal milling machinery, mining and oil field equipment, and in paper mills.

						Combined Load Cap., lbf
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	Bearing Trade No.	Ring Material	Dynamic	Static	Max. Rotation Speed, rpm	Lubrication	Max. Temp., ° F		Each
Open Bearing



		65	120	31	22213	Steel	49,500	51,500	4,300	Required	390	000000	0000000

Permanently Lubricated Ball Bearings

Install and forget these self-lubricating bearings. Their lubricant is a solid material that fills the space between the balls and releases oil over time, so you'll never need to add more.

Open—With no rubber seal to block airflow, these bearings dissipate heat quickly, extending the life of the lubricant and reducing friction over time.

Sealed—The best choice for dirty environments. A barrier seals out dust so it won't gunk up or wear down the balls. However, these bearings retain the most heat since air can't flow through.

Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.

							Temp. Range, ° F
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	ABEC Rating	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Min.	Max.	Inner Ring Type	Bearing Trade No.		Each
Open







				Steel

				55	120	29	1	13,100	3,300	10	200	Standard	6311	00000000	0000000


				Sealed







								Steel

								55	120	29	1	13,100	3,300	10	200	Standard	6311-2RS	00000000	000000

High-Load Crossed-Roller Bearings

The thicker inner and outer raceways on these bearings can handle heavier loads than the thin-profile crossed-roller bearings. The rollers face in alternating directions to allow for rigid, accurate motion under any combination of radial, thrust, and moment (twisting) loads. Use in applications where highly accurate motion is necessary, such as machine tools and industrial robots.

Open Bearing—Open bearings dissipate heat more efficiently than sealed bearings.

Sealed Bearing—Sealed bearings block out dust and other contaminants better than open bearings, but retain more heat.

				Combined Load Cap., lbf
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	Dynamic	Static	Max. Rotation Speed, rpm	Lubrication	Temp. Range, ° F	Features		Each
For Combined Radial, Thrust, and Moment Load—Open with Steel Ring



		80	120	16	7,200	9,700	750	Required	0 to 230	Lubrication Groove, Two Lubrication Holes	0000000	0000000


		For Combined Radial, Thrust, and Moment Load—Sealed with Steel Ring



				80	120	16	7,200	9,700	600	Lubricated	0 to 210	Lubrication Groove, Two Lubrication Holes	0000000	000000