13mm Housing ID Bearings

Smoother than smooth—the balls inside these bearings roll nearly friction-free. You’ll often find them on rapidly rotating parts, from the whirring chuck on a power drill to the spinning shaft on an electric motor.

Open—With no rubber seal to block airflow, these bearings dissipate heat quickly, extending the life of the lubricant and reducing friction over time.

Shielded—The balls are covered just enough to keep out large particles while allowing air to pass through and dissipate heat.

Sealed—The best choice for dirty environments. A barrier seals out dust so it won't gunk up or wear down the balls. However, these bearings retain the most heat since air can't flow through.

Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.

Corrosion-Resistant 440C Stainless Steel—Combine the strength of steel with the corrosion resistance of stainless steel. These bearings won't degrade from water or mild chemicals, such as the ammonia in cleaning solutions. However, they'll weaken when exposed to salt water and harsh chemicals, such as bleach.

Highly-Corrosion-Resistant 316 Stainless Steel—The most corrosion-resistant metal bearings we offer. They won't pit or weaken from salt water or harsh chemicals, such as bleach and chlorine found in cleaning solutions.

ABEC Rating—Bearings with an ABEC rating meet industry tolerance standards established by the Annular Bearing Engineers Committee (ABEC). They're rated on a scale from 1 to 9. The higher the rating, the tighter the tolerance. Bearings rated ABEC 1 or 3 are precise enough for most applications. If your application consistently runs at high speeds or requires high accuracy, consider bearings rated ABEC 5 or higher, since they generate less friction and heat.

							Temp. Range, ° F
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	ABEC Rating	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Min.	Max.	Inner Ring Type	Bearing Trade No.		Each
Open







				Highly-Corrosion-Resistant 316 Stainless Steel

				4	13	5	Not Rated	75	2,300	-40	140	Standard	624	00000000	000000


				Shielded







								Steel

								4	13	5	3	210	53,000	-20	230	Standard	624-2Z	0000000	00000




										Corrosion-Resistant 440C Stainless Steel

										4	13	5	5	290	48,000	-40	240	Standard	624-2Z	00000000	0000


										5	13	4	5	240	50,000	-40	240	Standard	695-2Z	00000000	0000
										6	13	5	5	240	48,000	-40	240	Standard	686-2Z	00000000	0000


										Sealed







														Steel

														4	13	5	3	210	32,000	-30	210	Standard	624-2RS	0000000	00000

Permanently Lubricated Ball Bearings

Install and forget these self-lubricating bearings. Their lubricant is a solid material that fills the space between the balls and releases oil over time, so you'll never need to add more.

Open—With no rubber seal to block airflow, these bearings dissipate heat quickly, extending the life of the lubricant and reducing friction over time.

Sealed—The best choice for dirty environments. A barrier seals out dust so it won't gunk up or wear down the balls. However, these bearings retain the most heat since air can't flow through.

							Temp. Range, ° F
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	ABEC Rating	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Min.	Max.	Inner Ring Type	Bearing Trade No.		Each
Open







				Corrosion-Resistant 440C Stainless Steel

				3	13	5	1	220	37,000	-10	200	Standard	633	00000000	000000


				5	13	4	1	180	33,000	-10	200	Standard	695	00000000	00000
				6	13	3.5	1	180	31,000	-10	200	Standard	686	00000000	00000


				Sealed







								Corrosion-Resistant 440C Stainless Steel

								3	13	5	1	220	37,000	-10	200	Standard	633-2RS	00000000	00000


								4	13	5	1	220	35,000	-10	200	Standard	624-2RS	00000000	00000
								5	13	4	1	180	33,000	-10	200	Standard	695-2RS	00000000	00000
								6	13	5	1	180	31,000	-10	200	Standard	686-2RS	00000000	00000

Flanged Ball Bearings

Install these bearings inside a housing and they won't budge. The flange presses against the housing wall, so vibration and other sudden forces parallel to the shaft (thrust loads) won't knock them off-kilter.

Open—With no rubber seal to block airflow, these bearings dissipate heat quickly, extending the life of the lubricant and reducing friction over time.

Shielded—The balls are covered just enough to keep out large particles while allowing air to pass through and dissipate heat.

Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.

				Flange, mm					Temp. Range, ° F
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	OD	Thk.	ABEC Rating	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Min.	Max.	Inner Ring Type	Bearing Trade No.		Each
Open







				Steel

				6	13	3.5	15	1	3	240	56,000	-50	300	Standard	686	000000000	000000




						Corrosion-Resistant 440C Stainless Steel

						4	13	5	15	1	3	230	60,000	-50	300	Standard	624	000000000	00000


						5	13	4	15	1	3	190	59,000	-50	300	Standard	695	000000000	00000


						Shielded







										Steel

										5	13	4	15	1	3	240	50,000	-50	300	Standard	695-2Z	000000000	00000


										6	13	5	15	1.1	3	240	48,000	-50	300	Standard	686-2Z	000000000	00000




												Corrosion-Resistant 440C Stainless Steel

												4	13	5	15	1	3	240	51,000	-50	300	Standard	624-2Z	000000000	00000


												5	13	4	15	1	3	190	50,000	-50	300	Standard	695-2Z	000000000	00000
												5	13	4	15	1	5	240	50,000	-20	250	Standard	695-2Z	00000000	00000
												6	13	5	15	1.1	3	190	48,000	-50	300	Standard	686-2Z	000000000	00000
												6	13	5	15	1.1	5	240	48,000	-20	250	Standard	686-2Z	00000000	00000

High-Precision Ball Bearings

Open

Shielded

The most precise bearings we offer, with tolerances tighter than a speck of dust. Rated ABEC 7 out of 9, they meet strict tolerance standards established by the Annular Bearing Engineers Committee (ABEC). You'll find them in equipment that requires both high speed and pinpoint accuracy, such as gyroscopes.

Open—With no rubber seal to block airflow, these bearings dissipate heat quickly, extending the life of the lubricant and reducing friction over time.

Shielded—The balls are covered just enough to keep out large particles while allowing air to pass through and dissipate heat.

							Temp. Range, ° F
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	ABEC Rating	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Min.	Max.	Inner Ring Type		Each
Open







				Corrosion-Resistant 440C Stainless Steel

				4	13	5	7	205	44,000	-30	280	Standard	0000000	000000


				6	13	3.5	7	160	42,000	-30	280	Standard	0000000	00000


				Shielded







								Corrosion-Resistant 440C Stainless Steel

								5	13	4	7	185	44,000	-30	280	Standard	0000000	00000


								6	13	5	7	160	42,000	-30	280	Standard	0000000	00000

Dry-Running Flanged Sleeve Bearings

Made of naturally slippery plastic so you’ll never have to add lubricant. They’re ideal for clean environments where you need to prevent oil drips or graphite flakes. Compared to metal bearings, they are lighter and will never rust.

Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

Nylon—The most popular choice, nylon is wear resistant yet economical. Keep in mind, though, that it will swell and weaken when exposed to moisture.

Ultra-Chemical-Resistant PTFE—The most chemical-resistant bearings we offer. PTFE is unaffected by the harsh fluids that other plastics can't handle, including all strong acids and bases. PTFE also reduces friction better than nylon but is not as strong.

High-Load Moisture-Resistant Rulon LR—Won’t swell in wet or humid places, similar to acetal, but can support higher loads. These bearings also operate smoothly from cryogenic to oven-like temperatures.

Ultra-Low-Friction Rulon J—These bearings glide effortlessly for applications with frequent starts and stops, such as conveyor systems.

Moisture-Resistant Ultra-Low-Friction Plastic Blend—These bearings won't warp or swell from humidity or direct contact with water. They glide effortlessly for applications with frequent starts and stops, such as conveyor systems.

	For Housing ID, mm	Lg., mm	Flange OD, mm	Flange Thk., mm	Dynamic Radial Load Cap. @ Speed	Dynamic Thrust Load Cap. @ Speed	Color	Temp. Range, ° F	Specs. Met		Each
Nylon



	10	13	10	16	1.5	37 lb. @ 120 rpm	28 lb. @ 120 rpm	White	-20 to 210	—	00000000	00000


	10	13	20	16	1.5	75 lb. @ 120 rpm	28 lb. @ 120 rpm	White	-20 to 210	—	00000000	0000


	Ultra-Chemical-Resistant PTFE



			10	13	12	16	1.5	15 lb. @ 120 rpm	9.5 lb. @ 120 rpm	White	-200 to 450	FDA Compliant 21 CFR 177.1550	00000000	00000


			10	13	16	16	1.5	20 lb. @ 120 rpm	9.5 lb. @ 120 rpm	White	-200 to 450	FDA Compliant 21 CFR 177.1550	00000000	00000


			High-Load Moisture-Resistant Rulon LR



					10	13	12	16	1.5	150 lb. @ 120 rpm	95 lb. @ 120 rpm	Maroon	-400 to 500	—	00000000	00000


					Ultra-Low-Friction Rulon J



							9	13	10	17	2	90 lb. @ 120 rpm	85 lb. @ 120 rpm	Gold	-400 to 500	—	00000000	00000


							Moisture-Resistant Ultra-Low-Friction Plastic Blend



									11	13	5	18	1	60 lb. @ 120 rpm	105 lb. @ 120 rpm	Yellow	-50 to 190	—	00000000	0000

Ball Bearings for Food and Beverage

Sealed

Food production rolls along smoothly on these bearings. Greased with FDA-compliant lubricant, they’re safe to install on food-processing equipment, such as conveyor belts, so long as they don’t directly touch the food. The lubricant is a solid material that fills the space between the balls and releases oil over time, so you'll never need to add more.

Sealed—The best choice for dirty environments. A barrier seals out dust so it won't gunk up or wear down the balls. However, these bearings retain the most heat since air can't flow through.

							Temp. Range, ° F
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	ABEC Rating	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Min.	Max.	Inner Ring Type	Food Industry Std.	Bearing Trade No.		Each
Sealed







				Corrosion-Resistant 440C Stainless Steel

				4	13	5	1	290	35,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	624-2RS	00000000	000000


				5	13	4	1	240	33,000	-40	200	Standard	FDA Compliant 21 CFR 178.3570	695-2RS	00000000	00000
				6	13	5	1	240	31,500	-40	200	Standard	FDA Compliant 21 CFR 178.3570	686-2RS	00000000	00000

Dry-Running Ball Bearings

Made of naturally slippery plastic so there's no lubricant to maintain or make a mess. These bearings are ideal for spic-and-span spaces since oil won't drip off, wash out, or collect dust over time. They won't rust or warp from moisture, so they stand up to thorough cleanings.

Open—With no rubber seal to block airflow, these bearings dissipate heat quickly, reducing wear and extending the life of the bearing.

Acetal—The most common choice for plastic bearings, acetal is economical yet still stands up to daily wear and tear.

316 Stainless Steel Balls—Won't corrode from salt water or harsh chemicals, such as bleach and chlorine found in cleaning solutions.

						Temp. Range, ° F				316 Stainless Steel Balls
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Min.	Max.	ABEC Rating	Bearing Trade No.		Each
Open







				Acetal

				4	13	5	15	3,100	-40	180	Not Rated	624	0000000	00000

Needle-Roller Bearings

Also known as drawn-cup roller bearings, these are our thinnest roller bearings. The outer ring is drawn out to form a lip that holds the bearing together. Bearings take on the shape of their housing and may be oblong prior to installation.

Open Bearing—Open bearings dissipate heat more efficiently than sealed bearings.

				Radial Load Cap., lb.
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	Dynamic	Static	Max. Rotation Speed, rpm	Lubrication	For Shaft Surface Smoothness, Ra, μin	Temp. Range, ° F	Specs. Met		Each
For Radial Load—Open with Steel Ring



		9	13	8	750	800	26,500	Required	8	-20 to 280	DIN 618, ISO 3245	00000000	00000


		9	13	10	960	1,050	26,500	Required	8	-40 to 280	DIN 618, ISO 3245	00000000	0000
		9	13	12	1,150	1,400	26,500	Required	8	-20 to 280	DIN 618, ISO 3245	00000000	0000

Oil-Embedded Flanged Sleeve Bearings

Install and forget these self-lubricating bearings. All are made from porous metal and saturated with oil to reduce maintenance and downtime. A good all-around choice, they are used in everything from palm-sized fans in electronics to tire-sized pulleys. Although these bearings will work in most conditions, oil may drip away if temperatures get too high. Consider a graphite-lubricated bearing for higher temperatures or places where you can’t afford the mess. All are fabricated, lubricated, and inspected in the U.S.

841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.

High-Load 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.

Mineral Oil Base—Mineral oil consistently lubricates at most temperatures but doesn’t last as long as synthetic oil.

Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.

	For Housing ID, mm	Lg., mm	Flange OD, mm	Flange Thk., mm	Dynamic Radial Load Cap. @ Speed	Dynamic Thrust Load Cap. @ Speed	Base Oil	Temp. Range, ° F		Each
841 Bearing Bronze



	10	13	6	16	1.5	185 lb. @ 120 rpm	370 lb. @ 120 rpm	Mineral Oil	-35 to 300	00000000	00000


	10	13	8	16	1.5	245 lb. @ 120 rpm	370 lb. @ 120 rpm	Mineral Oil	10 to 220	00000000	0000
	10	13	10	16	1.5	310 lb. @ 120 rpm	370 lb. @ 120 rpm	Mineral Oil	10 to 220	00000000	0000
	10	13	12	16	1.5	370 lb. @ 120 rpm	370 lb. @ 120 rpm	Synthetic Oil	-35 to 300	00000000	0000
	10	13	16	16	1.5	490 lb. @ 120 rpm	370 lb. @ 120 rpm	Synthetic Oil	-35 to 300	00000000	0000
	10	13	20	17	2.5	620 lb. @ 120 rpm	450 lb. @ 120 rpm	Mineral Oil	10 to 220	00000000	0000


	High-Load 863 Iron Copper



			10	13	12	16	1.5	520 lb. @ 120 rpm	330 lb. @ 120 rpm	Synthetic Oil	-15 to 300	00000000	0000


			10	13	16	16	1.5	700 lb. @ 120 rpm	330 lb. @ 120 rpm	Synthetic Oil	-15 to 300	00000000	0000

Oil-Embedded Sleeve Bearings

With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.

	For Housing ID, mm	Lg., mm	Dynamic Radial Load Cap. @ Speed	Base Oil	Temp. Range, ° F		Each
841 Bearing Bronze



	10	13	10	310 lb. @ 120 rpm	Synthetic Oil	-35 to 300	00000000	00000


	10	13	12	370 lb. @ 120 rpm	Synthetic Oil	-35 to 300	00000000	0000
	10	13	16	490 lb. @ 120 rpm	Synthetic Oil	-35 to 300	00000000	0000
	10	13	20	620 lb. @ 120 rpm	Synthetic Oil	-35 to 300	00000000	0000


	High-Load 863 Iron Copper



			10	13	10	430 lb. @ 120 rpm	Synthetic Oil	-15 to 300	00000000	0000


			10	13	16	700 lb. @ 120 rpm	Synthetic Oil	-15 to 300	00000000	0000

Flanged Sleeve Bearings

These bearings don’t come with a lubricant, so you can select the oil that meets the needs of your application. You’ll need to refill the oil, so make sure the bearing is located where you can access it. All are fabricated and inspected in the U.S.

High-Load 932 Bearing Bronze—These bearings are strong enough for sudden starts and stops, plus they resist wear and tear. They are cast from an alloy of leaded tin bronze for uniform rigidity and strength. Also known as 660 leaded bronze bearings.

	For Housing ID, mm	Lg., mm	Flange OD, mm	Flange Thk., mm	Dynamic Radial Load Cap. @ Speed	Dynamic Thrust Load Cap. @ Speed	Temp. Range, ° F		Each
High-Load 932 Bearing Bronze



	10	13	6	16	1.5	370 lb. @ 120 rpm	710 lb. @ 120 rpm	-350 to 450	0000000	00000


	10	13	10	16	1.5	620 lb. @ 120 rpm	710 lb. @ 120 rpm	-350 to 450	000000	0000
	10	13	12	16	1.5	740 lb. @ 120 rpm	710 lb. @ 120 rpm	-350 to 450	00000000	0000
	10	13	16	16	1.5	990 lb. @ 120 rpm	710 lb. @ 120 rpm	-350 to 450	00000000	0000

Ultra-Low-Friction Oil-Embedded Sleeve Bearings

Our slipperiest metal bearings, these are ideal for machinery with frequent starts and stops, such as conveyors. With nonstick PTFE particles added to the oil, they reduce friction to minimize wear and heat, so equipment runs more efficiently and lasts longer. All are fabricated, lubricated, and inspected in the U.S.

With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.

	For Housing ID, mm	Lg., mm	Dynamic Radial Load Cap. @ Speed	Base Oil	Lubricant Additive	Temp. Range, ° F	Specs. Met		Each
841 Bearing Bronze



	10	13	10	300 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	00000000	00000


	10	13	16	490 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	00000000	0000


	High-Load 863 Iron Copper



			10	13	10	430 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	—	00000000	0000


			10	13	16	700 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	—	00000000	0000

Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings

841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.

	For Housing ID, mm	Lg., mm	Flange OD, mm	Flange Thk., mm	Dynamic Radial Load Cap. @ Speed	Dynamic Thrust Load Cap. @ Speed	Base Oil	Lubricant Additive	Temp. Range, ° F	Specs. Met		Each
841 Bearing Bronze



	10	13	12	16	1.5	370 lb. @ 120 rpm	370 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	00000000	00000


	10	13	16	16	1.5	490 lb. @ 120 rpm	370 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	00000000	0000


	High-Load 863 Iron Copper



			10	13	12	16	1.5	520 lb. @ 120 rpm	330 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	—	00000000	0000


			10	13	16	16	1.5	700 lb. @ 120 rpm	330 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	—	00000000	0000

Dry-Running Sleeve Bearings

With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

Nylon—The most popular choice, nylon is wear resistant yet economical. Keep in mind, though, that it will swell and weaken when exposed to moisture.

Ultra-Low-Friction Rulon J—These bearings glide effortlessly for applications with frequent starts and stops, such as conveyor systems.

								Each
	For Shaft Dia., mm	For Housing ID, mm	Lg., mm	Dynamic Radial Load Cap. @ Speed	Color	Temp. Range, ° F		1-24	25-99	100-Up
Nylon



		10	13	10	31 lb. @ 120 rpm	Off-White	-10 to 220	00000000	000000	00000	00000


		10	13	12	37 lb. @ 120 rpm	Off-White	-10 to 220	00000000	00000	0000	0000
		10	13	20	60 lb. @ 120 rpm	Off-White	-10 to 220	00000000	00000	00000	0000


		Ultra-Low-Friction Rulon J



				9	13	10	90 lb. @ 120 rpm	Gold	-400 to 550	00000000	00000	00000	00000

High-Temperature Graphite-Lubricated Flanged Sleeve Bearings

Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. High-Temperature Graphite-Lubricated Flanged Sleeve Bearings.

Made of a graphite and metal alloy, these bearings stay slippery at high temperatures where oil burns off and other bearings fail. With no need for refills, they require little to no maintenance. You’ll find them in pumps, propellers, and mixers that spin near steam or inside ovens. However, graphite may eventually flake off, dropping flecks and leaving smudges. If you need a spic-and-span space, consider dry-running bearings made of slippery plastic instead. All are fabricated, lubricated, and inspected in the U.S.

	For Housing ID, mm	Lg., mm	Flange OD, mm	Flange Thk., mm	Dynamic Radial Load Cap. @ Speed	Dynamic Thrust Load Cap. @ Speed	Temp. Range, ° F		Each
High-Load 932 Bearing Bronze



	10	13	12	16	1.5	740 lb. @ 120 rpm	710 lb. @ 120 rpm	-350 to 450	00000000	000000


	10	13	16	16	1.5	990 lb. @ 120 rpm	710 lb. @ 120 rpm	-350 to 450	00000000	00000

Oil-Embedded Sleeve Bearings for Food and Beverage

These lead-free bearings are infused with a food-grade oil that is odorless, colorless, tasteless, and safe for unintended contact with food. They’re often used in food and beverage processing, packing, and handling equipment. All are made from porous metal and saturated with oil to reduce maintenance and downtime. If you need a bearing rated for contact with food, consider dry-running sleeve bearings for food and beverage. All are fabricated, lubricated, and inspected in the U.S.

With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.

	For Housing ID, mm	Lg., mm	Dynamic Radial Load Cap. @ Speed	Base Oil	Temp. Range, ° F	Specs. Met		Each
841 Bearing Bronze



	10	13	10	310 lb. @ 120 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570	00000000	00000


	10	13	16	490 lb. @ 120 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570	00000000	0000

Oil-Embedded Flanged Sleeve Bearings for Food and Beverage

These lead-free bearings are infused with a food-grade oil that is odorless, colorless, tasteless, and safe for incidental contact with food. They’re often used in food and beverage processing, packing, and handling equipment. All are made from porous metal and saturated with oil to reduce maintenance and downtime. If you need a bearing rated for direct contact with food, consider dry-running flanged sleeve bearings for food and beverage. All are fabricated, lubricated, and inspected in the U.S.

841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.

	For Housing ID, mm	Lg., mm	Flange OD, mm	Flange Thk., mm	Dynamic Radial Load Cap. @ Speed	Dynamic Thrust Load Cap. @ Speed	Base Oil	Temp. Range, ° F	Specs. Met		Each
841 Bearing Bronze



	10	13	12	16	1.5	370 lb. @ 120 rpm	370 lb. @ 120 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570	0000000	00000