A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Because it's solid, the lubricant blocks out water and dust, extending the life of the bearing.

With a spherical raceway and two rows of balls, these bearings compensate for shaft misalignment.

Internal locking elements (sprags) lock to transmit torque in one direction while turning freely in the other direction.

Bearings are 440C stainless steel for good corrosion resistance.

Good for applications with incidental food contact, these 440C stainless steel bearings have a food-grade, solid polymer lubricant between the balls and race that eliminates the need for additional lubrication.

Made of slippery plastic, these bearings do not require lubrication and have excellent corrosion and chemical resistance.

Made of PVDF, these bearings resist moisture absorption, so they won’t warp in underwater applications.

These bearings have twice as many contact points as angular-contact ball bearings.

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.

With a flexible layer of rubber sandwiched between an oil-embedded bronze bearing and rigid metal shell, these bearings reduce wear and machinery noise.

The oil in these bearings is suitable for incidental contact with food.

Use these bearings for frequent starts and stops in high-load applications.

Use where high loads and speeds are not required.

Graphite provides a layer of dry lubrication that can operate in high-temperature environments.

These bearings stand up to a wider range of chemicals than other dry-running sleeve bearings.

Permanently and securely install these self-clinching bearings into panels, with no need for precision-bored holes or machined mounts.

A figure-8-shaped groove provides a flow path for lubricant, distributing it evenly along the bearing’s surface.

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.

The oil in these bearings is suitable for incidental contact with food.

With oil for reduced friction and iron for added strength, these bearings handle frequent stops and starts in high-load applications.

Use these bearings in applications with frequent starts and stops because they operate with very little friction.

Made of FDA listed materials for use in food applications, these bearings also withstand caustic and washdown environments.

Good for underwater applications, these bearings won’t swell or warp when wet.

Reinforced with polyester fabric, these plastic bearings have load and speed capabilities comparable to metal bearings.

The addition of iron and aluminum gives these aluminum-bronze bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.

For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.

The oil in these bearings is suitable for incidental contact with food.

Use these bearings for frequent starts and stops in high-load applications. For low friction coefficients, they release a thin layer of an embedded PTFE lubricant during startup friction.

Use these bearings in applications with frequent starts and stops because they operate with very little friction.

Made of FDA listed materials for use in food applications, these bearings also withstand caustic and washdown environments.

These leaded bronze bearings are strong, wear resistant, and excellent at handling shock loads.

Mounting holes on the inner and outer rings allow for fastening onto hollow joints and shafts.

A built-in thrust ball bearing reduces wear from adjacent shaft components, while the needle-roller bearing supports radial loads.

These bearings have higher radial load capacity, speed, and accuracy than standard needle-roller bearings.

The needles in these bearings roll freely in one direction, but lock to transmit torque when the rotation of the shaft is reversed. Also known as drawn-cup roller clutches.

Adapt needle-roller thrust bearings to use on unhardened, unground surfaces.

Also known as tapped-base bearings, these ball bearings mount to surfaces from the bottom through threaded holes. Because of their narrow profile, they’re commonly used in tight-clearance spaces, including systems where multiple shafts are mounted close together.

Made from slippery materials, these bearings reduce friction without the oily mess.

Made of acetal blended with PTFE, these bearings handle speeds twice as fast as standard sleeve bearings.

Used in food, beverage, pharmaceutical, and chemical plants, these mounted ball bearings are IP69K certified for washdown environments and have a two-bolt flange for mounting.

Embedded lubricant particles increase the load capacity of these bearings while also making them slippery.

Made of acetal with a PTFE filling, these light duty bearings handle speeds twice as fast as standard acetal bearings can.

Made to withstand frequent washdowns, these bearings are permanently lubricated, which means you’ll never have to add lubricant. Use them in hard-to-reach areas in food, beverage, pharmaceutical, and chemical plants.

The choice for low-friction motion in high-temperature environments.

Designed to handle heavy loads, these bearings have higher load capacities than comparable standard linear ball bearings.

Ridges on the inside of these bearings wipe away dust and debris as the bearing travels on a shaft.

Made of FDA-listed materials for use in food applications, these bearings also have excellent chemical and corrosion resistance.

Use these ultra-thin sleeve bearings in high-speed applications where clearance is a concern.

Designed to handle heavy loads, these bearings have higher load capacities than comparable standard linear ball bearings for support rail shafts.

Sleeve bearings outperform ball bearings in dirty environments. Use them for low speed applications.

These bearings have a ceramic liner to help them achieve high speeds as well as rapid acceleration and deceleration.

The shell, housing, and balls of these bearings are stainless steel for excellent corrosion resistance.

Designed to handle heavy loads, these bearings have the highest load capacities of any mounted linear ball bearings we offer.

Virtually maintenance free, these bearings have slippery, chemical-resistant liners that don't require added lubrication.

A ceramic coating makes high speeds as well as rapid acceleration and deceleration possible.

With two bearings mounted in a single housing, these bearings have load capacities more than 10 times as high as standard mounted linear sleeve bearings. A ceramic liner helps them achieve high speeds as well as rapid acceleration and deceleration.

Designed to handle heavy loads, these bearings have higher load capacities than comparable standard mounted linear ball bearings for support rail shafts.

Virtually maintenance free, these bearings have slippery, chemical-resistant liners that don't require added lubrication.

With two bearings mounted in one housing, these sleeve bearings withstand heavy loads. Use them on round support rail shafts for applications that require maximum rigidity.