About Ball and Roller Bearings
More
About Plain Bearings
More
Thrust Ball Bearings
Steel balls and washers allow these bearings to handle higher loads than bearings with stainless steel components. With an open design, they dissipate heat more efficiently than one-piece thrust ball bearings.
For technical drawings and 3-D models, click on a part number.
Thrust Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | OD | Thick. | Cage Material | Washer Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | Includes | Each | |
Open | ||||||||||||
| 3/4" | 1 1/4" | 0.342" | Nylon Plastic | Steel | 40 | 290 | 5,000 | Required | -40° to 220° | Two Washers | 0000000 | 00000 |
Corrosion-Resistant Thrust Ball Bearings
A combination of stainless steel and nylon components provide increased corrosion resistance over standard thrust ball bearings. With an open design, they dissipate heat more efficiently than one-piece thrust ball bearings.
For technical drawings and 3-D models, click on a part number.
Thrust Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | OD | Thick. | Cage Material | Washer Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | Includes | Each | |
Open | ||||||||||||
| 3/4" | 1 1/4" | 0.342" | Nylon Plastic | 410 Stainless Steel | 30 | 200 | 5,000 | Required | -40° to 220° | Two Washers | 0000000 | 00000 |
High-Load Oil-Embedded Flanged Sleeve Bearings
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes these bearings to release a thin layer of oil onto their surface. Color is silver because of the iron.
863 iron-copper bearings are also known as Super Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
863 Iron-Copper Bearings | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
For 3/4" Shaft Dia. | ||||||||||
| 1" | 1/2" | 1 1/8" | 1/8" | 1,100 lbs. @ 60 rpm | 1,050 lbs. @ 60 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 00000000 | 00000 |
| 1" | 3/4" | 1 1/8" | 1/8" | 1,650 lbs. @ 60 rpm | 1,050 lbs. @ 60 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 00000000 | 0000 |
| 1" | 1 1/2" | 1 1/8" | 1/8" | 3,300 lbs. @ 60 rpm | 1,050 lbs. @ 60 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 00000000 | 0000 |
Chemical-Resistant Dry-Running Thrust Bearings
These bearings stand up to a wider range of chemicals than other dry-running thrust bearings. They are lightweight and strong.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| OD | Thick. | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
PEEK Plastic Bearings | ||||||
|---|---|---|---|---|---|---|
For 3/4" Shaft Dia. | ||||||
| 1 3/8" | 1/8" | 1,200 lbs. @ 60 rpm | Black | -40° to 500° | 000000 | 000000 |
Extreme-Temperature Dry-Running Mounted Sleeve Bearings
Capable of handling temperatures from -400° to 750° F, these graphalloy bearings have the widest temperature range of any of our mounted bearings. They are self-aligning to compensate for shaft misalignment.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Bearing Wd. | Hole Lg. | Hole Wd. | Hole Ctr.-to-Ctr. | Dynamic Radial Load Cap. | Temp. Range, °F | Alignment Style | Each | |
Graphalloy Bearings with Cast Iron Housing | |||||||||||||
| 3/4" | 1 5/16" | 2 17/32" | 5" | 1 1/2" | 1" | 3/4" | 1/2" | 3 3/4" | 560 lbs. @ 60 rpm | -400° to 750° | Self Aligning | 0000000 | 0000000 |
Extreme-Temperature Dry-Running Mounted
Sleeve Bearings with Two-Bolt Flange
Capable of handling temperatures from -400° to 750° F, these graphalloy bearings have the widest temperature range of any of our mounted bearings. They are self-aligning to compensate for shaft misalignment.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Ht. | Lg. | Wd. | Bearing Wd. | Flange Thick. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic Radial Load Cap. | Temp. Range, °F | Alignment Style | Each | |
Graphalloy Bearings with Cast Iron Housing | ||||||||||||
| 3/4" | 2 3/8" | 4 7/16" | 1 3/32" | 1 3/32" | 7/16" | 3/8" | 3 35/64" | 610 lbs. @ 60 rpm | -400° to 750° | Self Aligning | 0000000 | 0000000 |
Mounted Sleeve Bearings with Four-Bolt Flange
Capable of handling temperatures from -400° to 750° F, these graphalloy bearings have the widest temperature range of any of our mounted bearings. They are self-aligning to compensate for shaft misalignment.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Ht. | Lg. | Wd. | Bearing Wd. | Flange Thick. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic Radial Load Cap. | Temp. Range, °F | Alignment Style | Each | |
Graphalloy Bearings with Cast Iron Housing | ||||||||||||
| 3/4" | 3 3/8" | 3 3/8" | 1 3/32" | 1 3/32" | 15/32" | 15/32" | 2 33/64" | 610 lbs. @ 60 rpm | -400° to 750° | Self Aligning | 0000000 | 0000000 |