McMaster-Carr logo
    Filter by
    System of Measurement
    Shaft Diameter
    Attribute Image
    ID
    Attribute Image
    Plain Bearing Type
    Shaft Mount Type
    Bearing Type
    Industrial Info Compare
    Flange Thickness
    Lubricant
    Shaft Type
    Lubrication Method
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    DFARS Specialty Metals
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    78 Products

    Oil-Embedded Sleeve Bearings

    Image of Product. Front orientation. Sleeve Bearings. Oil-Embedded Sleeve Bearings.
    Install and forget these self-lubricating bearings. All are made from porous metal and saturated with oil to reduce maintenance and downtime. A good all-around choice, they are used in everything from palm-sized fans in electronics to tire-sized pulleys. Although these bearings will work in most conditions, oil may drip away if temperatures get too high. Consider a graphite-lubricated bearing for higher temperatures or places where you can’t afford the mess. All are fabricated, lubricated, and inspected in the U.S.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    High-Load 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.
    Mineral Oil Base—Mineral oil consistently lubricates at most temperatures but doesn’t last as long as synthetic oil.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Dynamic Radial Load
    Cap. @ Speed
    Base Oil
    Temp. Range,
    ° F
    Each
    841 Bearing Bronze
    1"1 5/16"1 1/4"2,500 lb. @ 60 rpmMineral Oil10 to 2200000000000000
    1"1 5/16"2 1/2"5,000 lb. @ 60 rpmMineral Oil10 to 2200000000000000
    1"1 5/16"3"6,000 lb. @ 60 rpmMineral Oil10 to 2200000000000000
    1"1 3/8"1"2,000 lb. @ 60 rpmSynthetic Oil-35 to 3000000000000000
    1"1 3/8"1 1/4"2,500 lb. @ 60 rpmSynthetic Oil-35 to 3000000000000000
    1"1 3/8"1 1/2"3,000 lb. @ 60 rpmSynthetic Oil-35 to 3000000000000000
    1"1 3/8"2"4,000 lb. @ 60 rpmSynthetic Oil-35 to 3000000000000000
    1"1 3/8"4"8,000 lb. @ 60 rpmSynthetic Oil-35 to 3000000000000000
     
    High-Load 863 Iron Copper
    1"1 1/4"1/2"1,100 lb. @ 60 rpmSynthetic Oil-15 to 300000000000000
    1"1 1/4"3/4"1,650 lb. @ 60 rpmSynthetic Oil-15 to 30000000000000
    1"1 1/4"1"2,200 lb. @ 60 rpmSynthetic Oil-15 to 30000000000000
    1"1 1/4"1 1/4"2,750 lb. @ 60 rpmSynthetic Oil-15 to 30000000000000
    1"1 1/4"1 1/2"3,300 lb. @ 60 rpmSynthetic Oil-15 to 300000000000000
    1"1 1/4"2"4,450 lb. @ 60 rpmSynthetic Oil-15 to 300000000000000
    1"1 1/4"2 1/4"5,000 lb. @ 60 rpmSynthetic Oil-15 to 3000000000000000
    1"1 1/4"2 1/2"5,550 lb. @ 60 rpmSynthetic Oil-15 to 3000000000000000
    1"1 1/4"2 7/8"6,400 lb. @ 60 rpmSynthetic Oil-15 to 3000000000000000
    1"1 1/4"3"6,650 lb. @ 60 rpmSynthetic Oil-15 to 3000000000000000
    1"1 1/4"4"8,900 lb. @ 60 rpmSynthetic Oil-15 to 3000000000000000
    1"1 3/8"1"2,200 lb. @ 60 rpmSynthetic Oil-15 to 300000000000000
    1"1 3/8"1 1/2"3,300 lb. @ 60 rpmSynthetic Oil-15 to 300000000000000
    1"1 3/8"4"8,900 lb. @ 60 rpmSynthetic Oil-15 to 3000000000000000
     

    Washers for Needle-Roller Thrust Bearings

    Image of Product. Front orientation. Thrust Roller Bearing Washers.
    Adapt needle-roller thrust bearings to use on unhardened, unground surfaces.
    For Shaft
    Dia.
    OD
    Thk.
    Washer
    Material
    Each
    1"1 9/16"0.032"Steel000000000000
    1"1 9/16"0.126"Steel00000000000

    Needle-Roller Thrust Bearings

    Image of Product. Bearings. Front orientation. Thrust Bearings. Needle-Roller Thrust Bearings.
    Image of Product. Front orientation. Thrust Roller Bearing Washers.

    Bearings

    Washers

    Small but mighty, our thinnest rolling thrust bearings slot into tight spaces and spin at whirring speeds. Their long, slender rollers support thrust loads and reduce friction in everything from machine tool spindles to gearboxes.
    A cage holds the rollers in place. You can install these bearings without washers between hardened, ground surfaces for the thinnest profile. If you’re working with unhardened, unground surfaces, you’ll need two washers for the rollers to run on. This three-piece design is easy to lubricate, but the oil will attract dust and grime since it’s exposed.
    Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.
    Thrust Bearings
    Thin Washers
    Thick Washers
    For Shaft
    Dia.
    OD
    Thk.
    Cage
    Material
    Dynamic Thrust
    Load Cap., lb.
    Max. Rotation
    Speed, rpm
    Temp. Range,
    ° F
    Each
    Thk.
    Each
    Thk.
    Each
    Steel
    1"1 9/16"5/64"Steel3,1507,5000 to 2400000000000000.032"0000000000000.126"000000000000
     

    Ultra-Low-Friction Oil-Embedded Sleeve Bearings

    Image of Product. Front orientation. Sleeve Bearings. Ultra-Low-Friction Oil-Embedded Sleeve Bearings.
    Our slipperiest metal bearings, these are ideal for machinery with frequent starts and stops, such as conveyors. With nonstick PTFE particles added to the oil, they reduce friction to minimize wear and heat, so equipment runs more efficiently and lasts longer. All are fabricated, lubricated, and inspected in the U.S.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Dynamic Radial Load
    Cap. @ Speed
    Base Oil
    Lubricant
    Additive
    Temp. Range,
    ° F
    Each
    841 Bearing Bronze
    1"1 1/4"1/2"990 lb. @ 60 rpmSynthetic OilPTFE
    		-40 to 4600000000000000
    1"1 1/4"3/4"1,450 lb. @ 60 rpmSynthetic OilPTFE
    		-40 to 460000000000000
    1"1 1/4"1"1,950 lb. @ 60 rpmSynthetic OilPTFE
    		-40 to 460000000000000
    1"1 1/4"1 1/4"2,450 lb. @ 60 rpmSynthetic OilPTFE
    		-40 to 460000000000000
    1"1 1/4"1 1/2"3,000 lb. @ 60 rpmSynthetic OilPTFE
    		-40 to 46000000000000
    1"1 1/4"1 3/4"3,450 lb. @ 60 rpmSynthetic OilPTFE
    		-40 to 4600000000000000
    1"1 1/4"2"1,950 lb. @ 60 rpmSynthetic OilPTFE
    		-40 to 4600000000000000
    1"1 1/4"2 1/2"4,950 lb. @ 60 rpmSynthetic OilPTFE
    		-40 to 4600000000000000
    1"1 1/4"3"1,950 lb. @ 60 rpmSynthetic OilPTFE
    		-40 to 4600000000000000
     

    Oil-Embedded Flanged Sleeve Bearings

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Oil-Embedded Flanged Sleeve Bearings.
    Install and forget these self-lubricating bearings. All are made from porous metal and saturated with oil to reduce maintenance and downtime. A good all-around choice, they are used in everything from palm-sized fans in electronics to tire-sized pulleys. Although these bearings will work in most conditions, oil may drip away if temperatures get too high. Consider a graphite-lubricated bearing for higher temperatures or places where you can’t afford the mess. All are fabricated, lubricated, and inspected in the U.S.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    High-Load 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Flange
    OD
    Flange
    Thk.
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Base Oil
    Temp. Range,
    ° F
    Each
    841 Bearing Bronze
    1"1 3/8"3/4"1 5/8"3/16"1,500 lb. @ 60 rpm2,500 lb. @ 60 rpmSynthetic Oil-35 to 30000000000000000
    1"1 3/8"1"1 5/8"3/16"2,000 lb. @ 60 rpm2,500 lb. @ 60 rpmSynthetic Oil-35 to 3000000000000000
    1"1 3/8"1 1/2"1 5/8"3/16"3,000 lb. @ 60 rpm2,500 lb. @ 60 rpmSynthetic Oil-35 to 3000000000000000
    1"1 3/8"2"1 5/8"3/16"4,000 lb. @ 60 rpm2,500 lb. @ 60 rpmSynthetic Oil-35 to 3000000000000000
     
    High-Load 863 Iron Copper
    1"1 1/4"3/4"1 1/2"3/16"1,650 lb. @ 60 rpm1,450 lb. @ 60 rpmSynthetic Oil-15 to 300000000000000
    1"1 1/4"1"1 1/2"3/16"2,200 lb. @ 60 rpm1,450 lb. @ 60 rpmSynthetic Oil-15 to 300000000000000
     

    Mil. Spec. Oil-Embedded Sleeve Bearings

    Image of Product. Front orientation. Sleeve Bearings. Mil. Spec. Oil-Embedded Sleeve Bearings.
    These bearings are manufactured and tested to strict U.S. military standards for material and construction. All are made from porous metal and saturated with oil to reduce maintenance and downtime. Although these bearings will work in most conditions, oil may drip away if temperatures get too high.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Dynamic Radial Load
    Cap. @ Speed
    Base Oil
    Temp. Range,
    ° F
    Specs. Met
    Each
    841 Bearing Bronze
    1"1 1/8"1"1,600 lb. @ 60 rpmSynthetic Oil-65 to 300ASTM B438, MIL-B-5687, MS17795-134000000000000
    1"1 1/4"1"1,600 lb. @ 60 rpmSynthetic Oil-65 to 300ASTM B438, MIL-B-5687, MS17795-14100000000000
     

    Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings.
    Our slipperiest metal bearings, these are ideal for machinery with frequent starts and stops, such as conveyors. With nonstick PTFE particles added to the oil, they reduce friction to minimize wear and heat, so equipment runs more efficiently and lasts longer. All are fabricated, lubricated, and inspected in the U.S.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Flange
    OD
    Flange
    Thk.
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Base Oil
    Lubricant
    Additive
    Temp. Range,
    ° F
    Each
    841 Bearing Bronze
    1"1 1/4"3/4"1 1/2"1/8"1,500 lb. @ 60 rpm1,950 lb. @ 60 rpmSynthetic OilPTFE
    		-140 to 460000000000000
    1"1 1/4"1"1 1/2"1/8"2,000 lb. @ 60 rpm1,950 lb. @ 60 rpmSynthetic OilPTFE
    		-140 to 46000000000000
    1"1 1/4"1 1/4"1 1/2"1/8"2,500 lb. @ 60 rpm1,950 lb. @ 60 rpmSynthetic OilPTFE
    		-140 to 460000000000000
    1"1 1/4"1 1/2"1 1/2"1/8"3,000 lb. @ 60 rpm1,950 lb. @ 60 rpmSynthetic OilPTFE
    		-140 to 4600000000000000
    1"1 3/8"3/4"1 5/8"3/16"1,500 lb. @ 60 rpm2,500 lb. @ 60 rpmSynthetic OilPTFE
    		-140 to 4600000000000000
    1"1 3/8"1"1 5/8"3/16"2,000 lb. @ 60 rpm2,500 lb. @ 60 rpmSynthetic OilPTFE
    		-140 to 4600000000000000
    1"1 3/8"1 1/2"1 5/8"3/16"3,000 lb. @ 60 rpm2,500 lb. @ 60 rpmSynthetic OilPTFE
    		-140 to 4600000000000000
    1"1 3/8"1 3/4"1 5/8"3/16"3,500 lb. @ 60 rpm2,500 lb. @ 60 rpmSynthetic OilPTFE
    		-140 to 4600000000000000
    1"1 3/8"2"1 5/8"3/16"4,000 lb. @ 60 rpm2,500 lb. @ 60 rpmSynthetic OilPTFE
    		-140 to 4600000000000000
     

    High-Temperature Graphite-Lubricated Sleeve Bearings

    Image of Product. Front orientation. Sleeve Bearings. High-Temperature Graphite-Lubricated Sleeve Bearings.
    Made of a graphite and metal alloy, these bearings stay slippery at high temperatures where oil burns off and other bearings fail. With no need for refills, they require little to no maintenance. You’ll find them in pumps, propellers, and mixers that spin near steam or inside ovens. However, graphite may eventually flake off, dropping flecks and leaving smudges. If you need a spic-and-span space, consider dry-running bearings made of slippery plastic instead. All are fabricated, lubricated, and inspected in the U.S.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Dynamic Radial Load
    Cap. @ Speed
    Temp. Range,
    ° F
    Each
    841 Bearing Bronze
    1"1 1/8"1"1,600 lb. @ 60 rpm-50 to 700000000000000
    1"1 1/4"1/2"800 lb. @ 60 rpm-50 to 70000000000000
    1"1 1/4"3/4"1,200 lb. @ 60 rpm-50 to 70000000000000
    1"1 1/4"1"1,600 lb. @ 60 rpm-50 to 70000000000000
    1"1 1/4"1 1/4"2,000 lb. @ 60 rpm-50 to 70000000000000
    1"1 1/4"1 1/2"2,400 lb. @ 60 rpm-50 to 70000000000000
    1"1 1/4"2"3,200 lb. @ 60 rpm-50 to 700000000000000
    1"1 1/4"2 1/4"3,600 lb. @ 60 rpm-50 to 7000000000000000
    1"1 1/4"2 1/2"4,000 lb. @ 60 rpm-50 to 7000000000000000
    1"1 1/4"3"4,800 lb. @ 60 rpm-50 to 7000000000000000
    1"1 3/8"1"1,600 lb. @ 60 rpm-50 to 7000000000000000
    1"1 3/8"1 1/2"2,400 lb. @ 60 rpm-50 to 7000000000000000
    1"1 1/2"2"3,200 lb. @ 60 rpm-50 to 7000000000000000
    1"1 1/2"3"4,800 lb. @ 60 rpm-50 to 7000000000000000
     

    Mil. Spec. Oil-Embedded Flanged Sleeve Bearings

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Mil. Spec. Oil-Embedded Flanged Sleeve Bearings.
    These bearings are manufactured and tested to strict U.S. military standards for material and construction. All are made from porous metal and saturated with oil to reduce maintenance and downtime. Although these bearings will work in most conditions, oil may drip away if temperatures get too high.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Flange
    OD
    Flange
    Thk.
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Base Oil
    Temp. Range,
    ° F
    Specs. Met
    Each
    841 Bearing Bronze
    1"1 1/4"3/4"1 1/2"1/8"1,200 lb. @ 60 rpm1,550 lb. @ 60 rpmSynthetic Oil-65 to 300ASTM B438, MIL-B-5687, MS17796-205000000000000
     

    High-Temperature Graphite-Lubricated Flanged Sleeve Bearings

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. High-Temperature Graphite-Lubricated Flanged Sleeve Bearings.
    Made of a graphite and metal alloy, these bearings stay slippery at high temperatures where oil burns off and other bearings fail. With no need for refills, they require little to no maintenance. You’ll find them in pumps, propellers, and mixers that spin near steam or inside ovens. However, graphite may eventually flake off, dropping flecks and leaving smudges. If you need a spic-and-span space, consider dry-running bearings made of slippery plastic instead. All are fabricated, lubricated, and inspected in the U.S.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Flange
    OD
    Flange
    Thk.
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Temp. Range,
    ° F
    Each
    841 Bearing Bronze
    1"1 1/4"3/4"1 1/2"1/8"1,200 lb. @ 60 rpm1,550 lb. @ 60 rpm-50 to 700000000000000
    1"1 1/4"1"1 1/2"1/8"1,600 lb. @ 60 rpm1,550 lb. @ 60 rpm-50 to 70000000000000
    1"1 1/4"1 1/4"1 1/2"1/8"2,000 lb. @ 60 rpm1,550 lb. @ 60 rpm-50 to 70000000000000
    1"1 1/4"1 1/2"1 1/2"1/8"2,400 lb. @ 60 rpm1,550 lb. @ 60 rpm-50 to 700000000000000
     

    Oil-Embedded Sleeve Bearings for Food and Beverage

    Image of Product. Front orientation. Sleeve Bearings. Oil-Embedded Sleeve Bearings for Food and Beverage.
    These lead-free bearings are infused with a food-grade oil that is odorless, colorless, tasteless, and safe for unintended contact with food. They’re often used in food and beverage processing, packing, and handling equipment. All are made from porous metal and saturated with oil to reduce maintenance and downtime. If you need a bearing rated for contact with food, consider dry-running sleeve bearings for food and beverage. All are fabricated, lubricated, and inspected in the U.S.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    High-Load 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Dynamic Radial Load
    Cap. @ Speed
    Base Oil
    Temp. Range,
    ° F
    Specs. Met
    Each
    841 Bearing Bronze
    1"1 1/4"1 1/4"2,500 lb. @ 60 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.35700000000000000
     
    High-Load 863 Iron Copper
    1"1 1/4"1 1/4"2,750 lb. @ 60 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.357000000000000
     

    Oil-Embedded Flanged Sleeve Bearings for Food and Beverage

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Oil-Embedded Flanged Sleeve Bearings for Food and Beverage.
    These lead-free bearings are infused with a food-grade oil that is odorless, colorless, tasteless, and safe for incidental contact with food. They’re often used in food and beverage processing, packing, and handling equipment. All are made from porous metal and saturated with oil to reduce maintenance and downtime. If you need a bearing rated for direct contact with food, consider dry-running flanged sleeve bearings for food and beverage. All are fabricated, lubricated, and inspected in the U.S.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Flange
    OD
    Flange
    Thk.
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Base Oil
    Temp. Range,
    ° F
    Specs. Met
    Each
    841 Bearing Bronze
    1"1 1/4"3/4"1 1/2"1/8"1,500 lb. @ 60 rpm1,950 lb. @ 60 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.3570000000000000
    1"1 1/4"1"1 1/2"1/8"2,000 lb. @ 60 rpm1,950 lb. @ 60 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.357000000000000
     

    Dry-Running Flanged Sleeve Bearings

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Dry-Running Flanged Sleeve Bearings.
    Made of naturally slippery plastic so you’ll never have to add lubricant. They’re ideal for clean environments where you need to prevent oil drips or graphite flakes. Compared to metal bearings, they are lighter and will never rust.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    MDS-Filled Nylon—A step up from standard nylon bearings. Upgraded with fine particles of molybdenum disulfide (MDS), these bearings have extra lubricity and wear resistance. However, they’re still nylon, which will swell and weaken when exposed to moisture.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Flange
    OD
    Flange
    Thk.
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Color
    Temp. Range,
    ° F
    Each
    MDS-Filled Nylon
    1"1 1/4"1"1 7/16"1/16"190 lb. @ 60 rpm110 lb. @ 60 rpmBlack-40 to 17000000000000000
    1"1 1/4"1"1 7/16"1/8"190 lb. @ 60 rpm110 lb. @ 60 rpmBlack-40 to 1700000000000000
    1"1 1/4"1 1/2"1 1/2"1/8"280 lb. @ 60 rpm125 lb. @ 60 rpmBlack-40 to 1700000000000000
     

    Dry-Running Sleeve Bearings

    Image of Product. Front orientation. Sleeve Bearings. Dry-Running Sleeve Bearings.
    Made of naturally slippery plastic so you’ll never have to add lubricant. They’re ideal for clean environments where you need to prevent oil drips or graphite flakes. Compared to metal bearings, they are lighter and will never rust.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    MDS-Filled Nylon—A step up from standard nylon bearings. Upgraded with fine particles of molybdenum disulfide (MDS), these bearings have extra lubricity and wear resistance. However, they’re still nylon and will swell and weaken when exposed to moisture.
    Each
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Dynamic Radial Load
    Cap. @ Speed
    Color
    Temp. Range,
    ° F
    1-24
    25-99
    100-Up
    MDS-Filled Nylon
    1"1 1/8"1"190 lb. @ 60 rpmBlack-40 to 170000000000000000000000000
     
    back to top