McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    73 Products

    Hand-Held Sheet Metal Benders for Making Corners

    Image of ProductInUse. Style B Shown Making a 45° Angle. Front orientation. Sheet Metal Benders. Hand-Held Sheet Metal Benders for Making Corners, Style B.
    Image of Product. Front orientation. Sheet Metal Benders. Hand-Held Sheet Metal Benders for Making Corners, Style B.

    Style B Shown Making a 45° Angle

    Style B

    Fold corners in flat metal sheets to create your own bin boxes, drip pans, and other three-dimensional objects. Similar to tucking the corners of a bedsheet, these benders twist and wrap the metal into triangle-shaped folds to form corners. Finish the fold by creasing it with a regular hand-held sheet metal bender.
    Style B—Style B benders form precise 45° or 90° corners. They have a finger hole for additional gripping options.
    Style
    Throat
    Dp.
    Bend
    Angle
    For Max.
    Steel Thk.
    Material
    Each
    For Aluminum, Stainless Steel, Steel
    B2", 3 1/8"45°, 90°1/64"Stainless Steel
    		00000000000000
     

    Hose Bender Springs

    Image of ProductInUse. Front orientation. Hose Bender Springs.
    Slide these hose bender springs over your hose and bend to form any angle up to 90°. They prevent kinks and wear in rubber hose from repeated flexing, so they're often used to route hose around machinery and walkways. For angles larger than 90°, use additional bender springs. All are stainless steel for use in wet and corrosive environments.
    For
    Hose
    Max.
    OD
    ID
    Max. Bending
    Angle
    Material
    Lg.
    Each
    For Rubber
    1/2"1/4"90°Stainless Steel
    		2 3/8"0000000000000
    5/8"5/16"90°Stainless Steel
    		2 5/8"000000000000
    11/16"3/8"90°Stainless Steel
    		2 3/4"000000000000
    13/16"1/2"90°Stainless Steel
    		3"000000000000
    15/16"5/8"90°Stainless Steel
    		3 1/2"000000000000
    1 1/16"3/4"90°Stainless Steel
    		4"000000000000
    1 3/8"1"90°Stainless Steel
    		5 1/8"000000000000
     

    Corrosion-Resistant Wire-Forming Pliers

    Image of Product. Pliers with Wire Cutter. Front orientation. Contains Inset. Wire-Forming Pliers. Corrosion-Resistant Wire-Forming Pliers , With Wire Cutter.
    Image of Product. Pliers. Front orientation. Contains Inset. Wire-Forming Pliers. Corrosion-Resistant Wire-Forming Pliers , Without Wire Cutter.

    Pliers with Wire Cutter

    Pliers

    Image of Attribute. Front orientation. Contains Annotated.
    Choose these stainless steel pliers for environments where moisture and other contaminants are present. They resist corrosion that can hinder joint movement, but the jaws will wear more quickly than a steel tool. Use them to loop and bend wire. Also known as round-nose pliers, their round jaws don’t hold objects as well as flat jaws. The jaws are spring assisted to open automatically when you release the handles. These pliers have plastic grips for comfort.
    With Wire Cutter—Pliers with a wire cutter have a cutting blade on the jaws.
    Static Dissipative—Static-dissipative pliers drain static away from your application, preventing buildup from electrostatic discharge (ESD) that can damage sensitive equipment.
    Jaw
    For
    Wire
    Overall
    Lg.
    Lg.
    Opening Style
    Texture
    Tip
    Dia.
    Material
    With Wire
    Cutter
    Max.
    Ga.
    Max.
    Dia.
    Type
    Surface Resistivity,
    ohm/sq.
    Performance
    Each
    Round Jaws and Cushion Grip
    3"5/8"Spring AssistedSmooth1/32"Stainless Steel
    		No————Corrosion Resistant000000000000
    4 1/2"13/16"Spring AssistedSmooth5/64"Stainless Steel
    		No———1× 10^9 to 1× 10^10Corrosion Resistant, Static Control, Static Dissipative00000000000
    5"15/16"Spring AssistedSmooth5/64"Stainless Steel
    		No———1× 10^9 to 1× 10^10Corrosion Resistant, Static Control, Static Dissipative00000000000
    6"1"Spring AssistedSmooth1/16"Stainless Steel
    		Yes22
    		0.025"Soft—Corrosion Resistant000000000000
    6"2 3/8"Spring AssistedSmooth1/16"Stainless Steel
    		No———1× 10^9 to 1× 10^10Corrosion Resistant, Static Control, Static Dissipative000000000000
    7 1/4"1 9/16"ManualSmooth1/16"Stainless Steel
    		No————Corrosion Resistant000000000000
     

    Pliers and Tweezers Sets

    Image of Product. Front orientation. Pliers Sets. Pliers and Tweezers Sets, Plastic Pouch.
    Image of Product. Front orientation. Pliers Sets. Pliers and Tweezers Sets, Plastic Pouch with Zipper Closure.

    Plastic Pouch

    Plastic Pouch with Zipper Closure

    A set of pliers and tweezers gives you the versatility of applying force with your full hand or precision of using your fingertips. They're great for holding, separating, and positioning wire, springs, and other small parts. The pliers in these sets have plastic grips for comfort.
    No. of
    Pieces
    Includes
    Material
    Container Type
    Each
    Cushion and Plain Grip with Manual and Spring-Assisted Jaws
    44 1/2" Lg. Long-Nose Spring-Assisted Pliers with Cushion Grip
    4 1/2" Lg. Oval-Head Spring-Assisted Wire Cutter with Cushion Grip
    4 1/2" Lg. No. 7 Tweezers with 0.030" Wd. × 0.025" Thick. 55° Curved, Pointed Tips
    5" Lg. No. AA Tweezers with 0.020" Wd. × 0.050" Thick. Pointed Tips    		Stainless Steel
    		Plastic Pouch0000000000000
     
    Cushion, Knurled-Head, and Ultra Grip with Manual and Spring-Assisted Jaws
    44 1/2" Lg. Long-Nose Spring-Assisted Pliers with Cushion Grip
    5" Lg. Oval-Head Spring-Assisted Wire Cutter with Ultra Grip
    4 3/4" Lg. No. 3 Tweezers with 0.015" Wd. × 0.025" Thick. Pointed Tips
    4 3/4" Lg. No. 7 Tweezers with 0.030" Wd. × 0.025" Thick. 40° Curved, Pointed Tips    		Carbon Steel, Stainless SteelPlastic Pouch with Zipper Closure000000000000
     

    Soft Tubing Expanding Pliers

    Image of Product. Closed. Front orientation. Tube Expanders. Soft Tubing Expanding Pliers.
    Image of Product. Open. Front orientation. Tube Expanders. Soft Tubing Expanding Pliers, 5" Overall Length.

    Closed

    Open

    Stretch the end of plastic and rubber tubing to make room for fittings with the same or slightly larger diameter. Insert the tips into tubing and squeeze the handles to open the jaws. Made of stainless steel, these pliers resist corrosion, and they can be sterilized to prevent contaminating tubing lines.
    For Tube
    ID
    Max. Expanded
    Tube ID
    Overall
    Lg.
    Tip
    Lg.
    Material
    Each
    For Plastic, Rubber
    1/16"3/32"5"3/8"Stainless Steel
    		0000000000000
    3/32"1/8"5"0.275"Stainless Steel
    		000000000000
    1/8"3/16"5"0.236"Stainless Steel
    		000000000000
     

    Nonmarring Wire-Forming Pliers

    Image of Product. Front orientation. Contains Inset. Wire-Forming Pliers. Nonmarring Wire-Forming Pliers.
    Image of Attribute. Front orientation. Contains Annotated.
    Image of Product. Front orientation. Jaw Covers for Pliers.

    Replacement Jaw

    Covers for

    Pliers

    The soft jaws on these pliers bend and loop wire without scratching or marring it. Also known as round-nose pliers, these pliers prevent damage to your workpiece, but their round jaws don’t hold as well as flat jaws. Made from stainless steel, they’re good for environments where there’s moisture and other contaminants. They resist corrosion that can hinder joint movement, but the jaws will wear more quickly than steel jaws. The grips are plastic for comfort.
    Pliers
    Replacement Jaw
    Covers for Pliers
    Jaw
    Overall
    Lg.
    Lg.
    Opening Style
    Texture
    Tip
    Dia.
    Material
    With Wire
    Cutter
    Jaw Pad
    Material
    Performance
    Each
    Pair
    Round Jaws and Cushion Grip
    4 3/4"3/4"Spring AssistedSmooth1/16"Stainless Steel
    		NoNylon
    		Nonmarring0000000000000000000000000
    5 1/4"1"Spring AssistedSmooth1/16"Stainless Steel
    		NoNylon
    		Nonmarring00000000000000000000000
     

    Nonmarring Parallel-Jaw Pliers

    For a strong grip that won’t damage your workpiece, these pliers have a parallel-jaw design with nonmarring surfaces. By clamping in parallel, the jaws make more contact with a workpiece than standard pliers and keep irregularly shaped objects from slipping forward when pressure is applied. It also means there’s less chance the jaws will nick your workpiece as they clamp down.
    Parallel-Jaw Pliers with Knob Jaw Adjustment
    Image of Product. With Jaw Adjustment Knob and Nylon Jaw Covers. Front orientation. Parallel-Jaw Pliers. Nonmarring Parallel-Jaw Pliers, Parallel-Jaw Pliers with Knob Jaw Adjustment, Nylon Jaw Pad.

    With Jaw Adjustment Knob

    and Nylon Jaw Covers

    Pliers with knob jaw adjustment let you set the jaw position to hold the opening size.
    Stainless Steel—Stainless steel pliers have a wide nose for a better grip on your work. They're also known as flat-nose and duckbill pliers.
    Jaw
    Overall
    Lg.
    Max.
    Cap.
    Lg.
    Opening Style
    Locking
    Style
    Texture
    Nose
    Type
    Tip
    Wd.
    Each
    Stainless Steel with Nylon Jaw Covers
     
    Flat Jaw and Plain Grip
    6 3/4"7/16"7/8"Spring AssistedKnobSmoothWide1/2"0000000000000
     

    Parallel-Jaw Pliers

    The jaws remain parallel as they move to keep irregularly shaped objects from slipping forward when pressure is applied. By clamping in parallel, the jaws contact more of a workpiece than standard pliers, which means they grip it better and are less likely to damage it.
    Parallel-Jaw Pliers with Knob Jaw Adjustment
    Image of Product. Plain Grip with Knob Jaw Adjustment. Front orientation. Parallel-Jaw Pliers. Parallel-Jaw Pliers, Parallel-Jaw Pliers with Knob Jaw Adjustment, Plain Grip.

    Plain Grip with Knob Jaw

    Adjustment

    Pliers with knob jaw adjustment let you set the jaw position to hold the opening size.
    Wide Nose—Wide-nose pliers are also known as flat-nose and duckbill pliers.
    Spring-Assisted Jaws—Pliers with spring-assisted jaws open automatically when you release the handles.
    Jaw
    Overall
    Lg.
    Max.
    Cap.
    Lg.
    Opening Style
    Locking
    Style
    Texture
    Tip
    Wd.
    Material
    With Wire
    Cutter
    Each
    Wide Nose
     
    Flat Jaw and Plain Grip
    7 1/2"9/16"2"Spring AssistedKnobSmooth25/32"Stainless Steel
    		No0000000000000
     

    Electrical Connector Pliers

    The jaws on these pliers easily and firmly grasp electrical components without damaging them or surrounding parts. They have plastic grips for comfort.
    For Splices
    Image of Product. Front orientation. Contains Inset. Electrical Connector Pliers. For Splices.
    Pliers for splices have stepped jaws and a long nose for parallel crimping. They also have a blade on the jaw for cutting wire.
    Spring-Assisted Jaws—Pliers with spring-assisted jaws automatically open when you release the handles.
    Jaw
    For
    Wire
    Overall
    Lg.
    Lg.
    Opening Style
    Texture
    Tip
    Thk.
    Material
    With Wire
    Cutter
    Max.
    Gauge
    Type
    Each
    Flat Jaw and Cushion Grip
    5 3/4"1 1/32"Spring AssistedSmooth3/8"Stainless Steel
    		Yes22
    		Soft0000000000000
     

    Corrosion-Resistant Adjustable Pliers

    Image of Product. Front orientation. Adjustable Pliers. Corrosion-Resistant Adjustable Pliers.
    Made of polished stainless steel, these pliers won’t rust in damp environments. They can be autoclaved to avoid contaminating food and pharmaceutical production areas.
    Flat Jaw—The most common style, these pliers have a broad contact area for gripping objects of various shapes. They’re good for nuts, bolts, sheets, and pipe.
    Plain Grip—These pliers don't have a grip to wear out or degrade from exposure to chemicals. However, they are the least comfortable to hold.
    Jaw
    Plain Grip
    Overall
    Lg.
    Max.
    Cap.
    Lg.
    No. of
    Positions
    Adjustment
    Texture
    Material
    Each
    Flat Jaw
    9 1/2"1 1/4"1 3/16"3Tongue and GrooveSerratedStainless Steel
    		0000000000000
     

    Corrosion-Resistant Tight-Clearance Locking Pliers

    Image of Product. Front orientation. Locking Pliers. Corrosion-Resistant Tight-Clearance Locking Pliers.
    Image of Attribute. Front orientation. Contains Annotated.
    Made of stainless steel with long, lockable jaws and thin tips, these pliers can be clamped in place around hard-to-reach objects in areas with moisture and other contaminants. They resist corrosion that can hinder joint movement, but the jaws will wear more quickly than steel pliers. Turn the screw to adjust the pressure and squeeze the handles to lock. They have combination jaws, so they have a flat area for general purpose gripping and a curved area for gripping round material.
    Lever-Release Handle—Pliers with lever release open when you press the lever.
    Jaw
    Overall
    Lg.
    Max.
    Cap.
    Lg.
    Opening Style
    Texture
    Tip
    Thk.
    Material
    With Wire
    Cutter
    Each
    Combination Jaws and Lever Release—Plain Grip
    6"19/32"1 5/8"Spring AssistedSerrated17/64"Stainless Steel
    		No0000000000000
     

    Tweezer Pliers Sets

    Image of Product. Front orientation. Pliers Sets. Tweezer Pliers Sets.
    Work under a microscope, and in other small spaces—the pliers in these sets are the smallest we offer. You hold them like tweezers, so you can make adjustments with your fingers instead of your whole hand. The jaws are spring assisted to open automatically when you release the handles.
    No. of
    Pieces
    Includes
    Material
    Each
    Plain Grip with Spring-Assisted Jaws
    63" Lg. 18° Bent-Nose Pliers
    3" Lg. 60° Bent-Nose Pliers
    3" Lg. Slim Long-Nose Pliers
    3" Lg. Standard Long-Nose Pliers
    3" Lg Wide-Tipped Long-Nose Pliers
    3" Lg. Wire-Forming Pliers    		Stainless Steel
    		00000000000000
     

    Tweezer-Handle Wire-Forming Pliers

    Image of Product. Front orientation. Contains Inset. Wire-Forming Pliers. Tweezer-Handle Wire-Forming Pliers.
    The smallest round-nose pliers we offer allow you to bend and loop wire in the smallest spaces, including under a microscope. These tools have spring-assisted jaws that open automatically when you release the handles.
    Jaw
    Overall
    Lg.
    Lg.
    Opening Style
    Texture
    Tip
    Thk.
    Material
    With Wire
    Cutter
    Each
    Flat Jaws and Plain Grip
    3"1/2"Spring AssistedSmooth1/64"Stainless Steel
    		No0000000000000
     

    Corrosion-Resistant Locking Pliers

    Image of Product. Curved Jaws. Front orientation. Locking Pliers. Corrosion-Resistant Locking Pliers, Curved Jaws and Lever Release—Plain Grip.

    Curved Jaws

    Image of Product. Flat Jaws. Front orientation. Locking Pliers. Corrosion-Resistant Locking Pliers, Flat Jaws and Lever Release—Plain Grip.

    Flat Jaws

    Choose a stainless steel tool for environments where moisture and other contaminants are present. These pliers resist corrosion that can hinder joint movement, but the jaws will wear more quickly than a steel tool. Lock the jaws in a vise-like grip around a workpiece and they stay clamped in place to leave your hands free. Turn the screw to adjust the pressure and squeeze the handles to lock. Press the lever to release.
    Curved Jaw—Curved-jaw pliers are the most common style and provide a good grip on a variety of shapes.
    Flat Jaw—Flat-jaw pliers are designed to grip flat objects.
    Jaw
    Overall
    Lg.
    Max.
    Cap.
    Lg.
    Opening
    Style
    Texture
    Material
    With Wire
    Cutter
    Each
    Curved Jaws and Lever Release—Plain Grip
    7"1 1/2"1"ManualSerratedStainless Steel
    		No00000000000000
     
    Flat Jaws and Lever Release—Plain Grip
    9"1 3/4"1 3/8"ManualSerratedStainless Steel
    		No0000000000000
     

    Corrosion-Resistant Pliers Sets

    Image of Product. Front orientation. Pliers Sets. Corrosion-Resistant Pliers Sets.
    Choose these stainless steel pliers for environments where moisture and other contaminants are present. They resist corrosion that can hinder joint movement, but the jaws will wear more quickly than a steel tool.
    Cushion Grip—Cushion-grip pliers have plastic grips for comfort and spring-assisted jaws that open automatically when you release the handles.
    No. of
    Pieces
    Includes
    Material
    Performance
    Container Type
    Each
    Cushion Grip with Spring-Assisted Jaws
    64 1/2" Lg. Long-Nose Pliers
    5 3/4" Lg. Long-Nose Pliers
    4 3/4" Lg. Long-Nose Pliers with Wire Cutter
    4 1/2" Lg. Wide-Tipped Long-Nose Pliers
    4 1/2" Lg. Wire Cutter
    4 1/2" Lg. Wire End Cutter    		Stainless Steel
    		Corrosion ResistantPlastic Roll-Up Pouch00000000000000
     
    Plain Grip with Manual Jaws
    59 1/2" Lg. Adjustable Pliers with Flat Jaws
    6" Lg. Slip-Joint Pliers
    6" Lg. Long-Nose Pliers with Wire Cutter
    8" Lg. Wire Gripping and Cutting Pliers
    6" Lg. Wire Cutter    		Stainless Steel
    		Corrosion ResistantPlastic Roll-Up Pouch0000000000000
     

    Corrosion-Resistant Slip-Joint Pliers

    Image of Product. Cushion Grip. Front orientation. Slip-Joint Pliers. Corrosion-Resistant Slip-Joint Pliers, Stainless Steel, Cushion Grip.

    Cushion Grip

    Image of Product. Plain Grip. Front orientation. Slip-Joint Pliers. Corrosion-Resistant Slip-Joint Pliers, Stainless Steel, Plain Grip.

    Plain Grip

    Choose a stainless steel tool for environments where moisture and other contaminants are present. These pliers resist corrosion that can hinder joint movement, but the jaws will wear more quickly than a steel tool. Adjust the pivot point to switch between two different jaw opening sizes. The jaws have a flat area for general purpose gripping and a curved area for round material.
    Cushion Grip—Cushion-grip pliers have plastic grips for comfort.
    Jaw
    For Wire
    Overall
    Lg.
    Lg.
    Texture
    With Wire
    Cutter
    Max.
    Gauge
    Max.
    Dia.
    Type
    Each
    Stainless Steel
     
    Combination Jaws and Cushion Grip
    6 1/2"3/4"SerratedYes16
    		0.049"Soft0000000000000
     
    Combination Jaws and Plain Grip
    6 1/2"3/4"SerratedYes16
    		0.049"Soft00000000000
     

    Corrosion-Resistant Wire-Gripping Pliers

    Image of Product. Front orientation. Wire-Gripping Pliers. Corrosion-Resistant Wire-Gripping Pliers, Cushion Grip, Combination Jaw.
    Image of Product. Front orientation. Wire-Gripping Pliers. Corrosion-Resistant Wire-Gripping Pliers, Plain Grip, Combination Jaw.

    Cushion Grip

    Combination Jaw

    Plain Grip

    Combination Jaw

    Made of stainless steel or titanium, these pliers are good for environments where moisture and other contaminants are present. Also known as lineman’s and combination pliers, use them to pull, bend, and cut wire. The jaws have a flat area for general gripping and a curved area for round material.
    Stainless Steel—Stainless steel pliers resist corrosion that can hinder joint movement, but the jaws will wear more quickly than steel jaws.
    Cushion Grip—Cushion-grip pliers have plastic grips for comfort.
    Jaw
    For
    Wire
    Cushion Grip
    Plain Grip
    Jaw Style
    Overall
    Lg.
    Max.
    Cap.
    Lg.
    Texture
    Max.
    Ga.
    Max.
    Dia.
    Type
    Performance
    Each
    Each
    Stainless Steel
    Combination8"1 3/4"1 3/8"Serrated10
    		0.102"SoftCorrosion Resistant00000000000000000000000000
     

    Tweezer-Style Bent-Nose Pliers

    Image of Product. Front orientation. Contains Inset. Long-Nose Pliers. Tweezer-Style Bent-Nose Pliers, Standard Nose with Flat Jaw, Plain Grip, 18° Jaw Bend.
    Image of Product. Front orientation. Contains Inset. Long-Nose Pliers. Tweezer-Style Bent-Nose Pliers, Standard Nose with Flat Jaw, Plain Grip, 60° Jaw Bend.
    Image of Attribute. Front orientation. Contains Annotated. Tweezer-Style Bent-Nose Pliers.

    Standard Nose with Flat Jaw

    Plain Grip

    18° Jaw Bend

    Standard Nose with Flat Jaw

    Plain Grip

    60° Jaw Bend

    Reach past obstacles and grasp the tiniest workpieces when larger pliers are too clumsy for the job. Bent jaws navigate circuit boards, miniature prototypes, and other tightly packed workpieces. The knurled finger grips prevent slipping. Made of stainless steel, they resist corrosion and can be sterilized, so they’re often used in clean rooms.
    Flat Jaw—The most common style, these pliers have a broad contact area for gripping objects of various shapes.
    Plain Grip—These pliers don't have a grip to wear out or degrade from exposure to chemicals. However, they are the least comfortable to hold.
    Jaw
    Overall
    Lg.
    Bend
    Lg.
    (A)
    Lg.
    (B)
    Opening Style
    Texture
    Tip
    Thk.
    Material
    With Wire
    Cutter
    Each
    Standard Nose with Flat Jaw
     
    Plain Grip
    3"18°1/4"3/8"Spring AssistedSmooth1/64"Stainless Steel
    		No00000000000000
    3"60°1/8"7/16"Spring AssistedSmooth1/16"Stainless Steel
    		No000000000000
     

    Tweezer-Style Long-Nose Pliers

    Image of Product. Front orientation. Contains Inset. Long-Nose Pliers. Tweezer-Style Long-Nose Pliers, Standard Nose with Flat Jaw, Plain Grip.
    Image of Product. Front orientation. Contains Inset. Long-Nose Pliers. Tweezer-Style Long-Nose Pliers, Slim Nose with Flat Jaw, Plain Grip.
    Image of Attribute. Front orientation. Contains Annotated. Tweezer-Style Long-Nose Pliers.

    Standard Nose with Flat Jaw

    Plain Grip

    Slim Nose with Flat Jaw

    Plain Grip

    Grasp the tiniest components when larger pliers are too clumsy for the job. With knurled finger grips that prevent slipping, they're ideal for assembling circuit boards or working under microscopes. Made of stainless steel, they resist corrosion and can be sterilized, so they’re often used in clean rooms.
    Slim Nose—The thinnest and narrowest jaws fit into the tightest spaces behind panels and inside small enclosures.
    Flat Jaw—The most common style, these pliers have a broad contact area for gripping objects of various shapes.
    Plain Grip—These pliers don't have a grip to wear out or degrade from exposure to chemicals. However, they are the least comfortable to hold.
    Jaw
    Tip
    Overall
    Lg.
    Lg.
    Opening Style
    Texture
    Wd.
    Thk.
    Material
    With Wire
    Cutter
    Each
    Standard Nose with Flat Jaw
     
    Plain Grip
    3"1/4"Spring AssistedSmooth1/64"1/32"Stainless Steel
    		No00000000000000
    3"1/4"Spring AssistedSmooth1/32"1/16"Stainless Steel
    		No000000000000
     
    Slim Nose with Flat Jaw
     
    Plain Grip
    3"1/4"Spring AssistedSmooth3/64"1/16"Stainless Steel
    		No000000000000
     

    Long-Nose Pliers

    Image of Product. Front orientation. Long-Nose Pliers. Long-Nose Pliers, Standard Nose with Flat Jaw, Ultra Grip.
    Image of Product. Front orientation. Long-Nose Pliers. Long-Nose Pliers, Standard Nose with Flat Jaw, Plain Grip.

    Standard Nose with

    Flat Jaw, Ultra Grip

    Standard Nose with Flat

    Jaw, Plain Grip

    Image of Product. Front orientation. Long-Nose Pliers. Long-Nose Pliers, Wide Nose with Flat Jaw, Cushion Grip.
    Image of Product. Front orientation. Long-Nose Pliers. Long-Nose Pliers, Slim Nose with Flat Jaw, Cushion Grip.

    Wide Nose with Flat Jaw

    Cushion Grip

    Slim Nose with Flat Jaw

    Cushion Grip

    Image of Attribute. Front orientation. Contains Annotated. Long-Nose Pliers.
    Grab, bend, and twist wire. The long, narrow jaws reach into tight spaces and grip small workpieces.
    Stainless Steel—Don’t risk contaminating workpieces with rust that can form on steel tools. Stainless steel pliers resist corrosion from moisture and chemicals, but they aren’t as strong as steel pliers.
    Wide Nose—Twice as wide as standard-nose pliers for a better grip on flat connectors and thick wire. Also known as duckbill and flat-nose pliers.
    Slim Nose—The thinnest and narrowest jaws fit into the tightest spaces behind panels and inside small enclosures.
    Flat Jaw—The most common style, these pliers have a broad contact area for gripping objects of various shapes.
    Cushion Grip—Absorb pressure to make gripping and squeezing the handles more comfortable. They also add slip resistance for a secure hold.
    Ultra Grip—Shaped for maximum comfort and slip resistance. These pliers reduce strain to prevent cramping and soreness during repetitive tasks and long work days.
    Plain Grip—These pliers don't have a grip to wear out or degrade from exposure to chemicals. However, they are the least comfortable to hold.
    Jaw
    Tip
    For Wire
    Overall
    Lg.
    Lg.
    Opening Style
    Texture
    Wd.
    Thk.
    Material
    With Wire
    Cutter
    Wire Cutter
    Location
    Max. Wire
    Ga.
    Max.
    Dia.
    Type
    Each
    Standard Nose with Flat Jaw
     
    Ultra Grip
    6 1/2"1 3/4"ManualSerrated1/8"1/8"Stainless Steel
    		YesBase18
    		0.040"Soft0000000000000
     
    Plain Grip
    6"1 7/8"ManualSerrated5/32"1/8"Stainless Steel
    		YesBase14
    		0.064"Soft000000000000
     
    Wide Nose with Flat Jaw
     
    Cushion Grip
    3"5/8"Spring AssistedSmooth1/8"1/32"Stainless Steel
    		No————00000000000
     
    Slim Nose with Flat Jaw
     
    Cushion Grip
    3"5/8"Spring AssistedSmooth1/16"1/32"Stainless Steel
    		No————00000000000
     

    Static-Control Bent Nose Pliers

    Image of Product. Front orientation. Long-Nose Pliers. Static-Control Bent Nose Pliers, Standard Nose with Flat Jaw, Cushion Grip, 40° Jaw Bend.
    Image of Product. Front orientation. Long-Nose Pliers. Static-Control Bent Nose Pliers, Standard Nose with Flat Jaw, Cushion Grip, 60° Jaw Bend.
    Image of Product. Front orientation. Long-Nose Pliers. Static-Control Bent Nose Pliers, Standard Nose with Flat Jaw, Cushion Grip, 75° Jaw Bend.

    Standard Nose with

    Flat Jaw, Cushion

    Grip, 40° Jaw Bend

    Standard Nose with

    Flat Jaw, Cushion

    Grip, 60° Jaw Bend

    Standard Nose with

    Flat Jaw, Cushion

    Grip, 75° Jaw Bend

    Image of Product. Front orientation. Long-Nose Pliers. Static-Control Bent Nose Pliers, Slim Nose with Flat Jaw, Cushion Grip, 45° Jaw Bend.
    Image of Product. Front orientation. Long-Nose Pliers. Static-Control Bent Nose Pliers, Slim Nose with Flat Jaw, Cushion Grip, 90° Jaw Bend.
    Image of Attribute. Front orientation. Contains Annotated. Static-Control Bent Nose Pliers.

    Slim Nose with Flat Jaw

    Cushion Grip

    45° Jaw Bend

    Slim Nose with Flat Jaw

    Cushion Grip

    90° Jaw Bend

    Prevent static buildup while reaching around tightly spaced components. These pliers drain static to avoid electrostatic discharge (ESD) that can damage circuits, controls, and other sensitive components.
    Stainless Steel—Don’t risk contaminating workpieces with rust that can form on steel tools. Stainless steel pliers resist corrosion from moisture and chemicals, but they aren’t as strong as steel pliers.
    Slim Nose—The thinnest and narrowest jaws fit into the tightest spaces behind panels and inside small enclosures.
    Flat Jaw—The most common style, these pliers have a broad contact area for gripping objects of various shapes.
    Cushion Grip—Absorb pressure to make gripping and squeezing the handles more comfortable. They also add slip resistance for a secure hold.
    Jaw
    Overall
    Lg.
    Bend
    Lg.
    (A)
    Lg. (B)
    Opening Style
    Texture
    Tip
    Thk.
    Material
    Surface Resistivity,
    ohm/sq.
    Static Control
    Rating
    With Wire
    Cutter
    Each
    Standard Nose with Flat Jaw
     
    Cushion Grip
    4 1/2"40°11/32"9/16"Spring AssistedSerrated3/64"Stainless Steel
    		1× 10^4 to 1× 10^6ConductiveNo0000000000000
    4 1/2"60°1/4"1/2"Spring AssistedSmooth1/8"Stainless Steel
    		1× 10^10AntistaticNo000000000000
    6"75°1 1/8"9/16"Spring AssistedSerrated1/8"Stainless Steel
    		1× 10^9 to 1× 10^10Static DissipativeNo000000000000
     
    Slim Nose with Flat Jaw
     
    Cushion Grip
    5"45°7/16"1"Spring AssistedSmooth3/64"Stainless Steel
    		1× 10^9 to 1× 10^10Static DissipativeNo000000000000
    5 3/4"90°3/8"1 1/2"Spring AssistedSmooth5/64"Stainless Steel
    		1× 10^10AntistaticNo000000000000
    6 1/2"45°11/32"1 11/16"Spring AssistedSerrated5/64"Stainless Steel
    		1× 10^10AntistaticNo000000000000
     

    Nonmarring Long-Nose Pliers

    Image of Product. Front orientation. Long-Nose Pliers. Nonmarring Long-Nose Pliers, Wide Nose with Flat Jaw and Nylon Jaw Pads, Cushion Grip.
    Image of Product. Front orientation. Long-Nose Pliers. Nonmarring Long-Nose Pliers, Wide Nose with Flat Brass Jaws, Cushion Grip.

    Wide Nose with Flat

    Jaw and Nylon Jaw

    Pads, Cushion Grip

    Wide Nose with Flat

    Brass Jaws, Cushion

    Grip

    Image of Attribute. Front orientation. Contains Annotated. Nonmarring Long-Nose Pliers.
    Grip and bend wire and other small workpieces without scratching or scuffing them.
    Stainless Steel—Don’t risk contaminating workpieces with rust that can form on steel tools. Stainless steel pliers resist corrosion from moisture and chemicals, but they aren’t as strong as steel pliers.
    Wide Nose—Twice as wide as standard-nose pliers for a better grip on flat connectors and thick wire. Also known as duckbill and flat-nose pliers.
    Flat Jaw—The most common style, these pliers have a broad contact area for gripping objects of various shapes.
    Brass Jaw—A softer metal, these pliers won’t mar steel surfaces. They're often used to adjust and repair molding equipment.
    Cushion Grip—Absorb pressure to make gripping and squeezing the handles more comfortable. They also add slip resistance for a secure hold.
    Long-Nose Pliers
    Replacement Jaw Pads
    Jaw
    Tip
    Overall
    Lg.
    Lg.
    Opening Style
    Texture
    Wd.
    Thk.
    Material
    With Wire
    Cutter
    Each
    No. of Pads
    Included
    Pkg.
    Wide Nose with Flat Jaw and Nylon Jaw Pads
     
    Cushion Grip
    3 3/4"3/4"Spring AssistedSmooth1/4"1/16"Stainless Steel
    		No00000000000————0
    4 3/4"3/4"Spring AssistedSmooth1/8"1/8"Stainless Steel
    		No000000000001 Pair000000000000
    4 3/4"7/8"Spring AssistedSmooth1/4"1/8"Stainless Steel
    		No000000000001 Pair00000000000
     
    Wide Nose with Flat Brass Jaws
     
    Cushion Grip
    5"1 1/16"Spring AssistedSmooth1/4"1/8"Stainless Steel
    		No00000000000————0
     

    Static-Control Long-Nose Pliers

    Image of Product. Front orientation. Contains Inset. Long-Nose Pliers. Static-Control Long-Nose Pliers, Standard Nose with Flat Jaw, Cushion Grip.
    Image of Product. Front orientation. Contains Inset. Long-Nose Pliers. Static-Control Long-Nose Pliers, Wide Nose with Flat Jaw, Cushion Grip.

    Standard Nose with Flat Jaw

    Cushion Grip

    Wide Nose with Flat Jaw

    Cushion Grip

    Image of Product. Front orientation. Contains Inset. Long-Nose Pliers. Static-Control Long-Nose Pliers, Slim Nose with Flat Jaw, Cushion Grip.
    Image of Attribute. Front orientation. Contains Annotated. Static-Control Long-Nose Pliers.

    Slim Nose with Flat Jaw

    Cushion Grip

    Avoid zaps from static electricity that can damage circuits, controls, and other sensitive components. The grips on these pliers drain static, so there’s no buildup to create electrostatic discharge (ESD).
    Stainless Steel—Don’t risk contaminating workpieces with rust that can form on steel tools. Stainless steel pliers resist corrosion from moisture and chemicals, but they aren’t as strong as steel pliers.
    Wide Nose—Twice as wide as standard-nose pliers for a better grip on flat connectors and thick wire. Also known as duckbill and flat-nose pliers.
    Slim Nose—The thinnest and narrowest jaws fit into the tightest spaces behind panels and inside small enclosures.
    Flat Jaw—The most common style, these pliers have a broad contact area for gripping objects of various shapes.
    Cushion Grip—Absorb pressure to make gripping and squeezing the handles more comfortable. They also add slip resistance for a secure hold.
    Jaw
    Tip
    For Wire
    Overall
    Lg.
    Lg.
    Opening Style
    Texture
    Wd.
    Thk.
    Material
    Surface Resistivity,
    ohm/sq.
    Static Control
    Rating
    With Wire
    Cutter
    Wire Cutter
    Location
    Max. Wire
    Ga.
    Max.
    Dia.
    Type
    Each
    Standard Nose with Flat Jaw
     
    Cushion Grip
    5"1"Spring AssistedSerrated3/32"1/8"Stainless Steel
    		1× 10^10AntistaticYesBase18
    		0.040"Soft0000000000000
    5"1 1/16"ManualSerrated5/64"3/64"Stainless Steel
    		1× 10^9 to 1× 10^10Static DissipativeNo————000000000000
    5"1 7/16"ManualSmooth5/64"1/16"Stainless Steel
    		1× 10^9 to 1× 10^10Static DissipativeNo————000000000000
    6"1 9/16"Spring AssistedSerrated7/64"1/8"Stainless Steel
    		1× 10^9 to 1× 10^10Static DissipativeNo————000000000000
    6 1/4"1 19/64"Spring AssistedSmooth1/16"1/32"Stainless Steel
    		1× 10^10AntistaticNo————000000000000
     
    Wide Nose with Flat Jaw
     
    Cushion Grip
    4 1/2"15/16"Spring AssistedSmooth5/32"3/64"Stainless Steel
    		1× 10^9 to 1× 10^10Static DissipativeNo————000000000000
    5"1 3/16"Spring AssistedSmooth1/4"3/64"Stainless Steel
    		1× 10^9 to 1× 10^10Static DissipativeNo————00000000000
    5 3/4"1 19/64"Spring AssistedSerrated1/16"1/64"Stainless Steel
    		1× 10^10AntistaticNo————000000000000
    6"1 11/16"Spring AssistedSmooth15/64"3/64"Stainless Steel
    		1× 10^9 to 1× 10^10Static DissipativeNo————000000000000
     
    Slim Nose with Flat Jaw
     
    Cushion Grip
    4 1/2"15/16"Spring AssistedSmooth5/64"1/16"Stainless Steel
    		1× 10^9 to 1× 10^10Static DissipativeNo————000000000000
    4 3/4"29/32"Spring AssistedSmooth3/64"3/64"Stainless Steel
    		1× 10^10AntistaticNo————000000000000
    4 3/4"29/32"Spring AssistedSerrated3/64"3/64"Stainless Steel
    		1× 10^10AntistaticNo————000000000000
    5 3/4"1 15/16"Spring AssistedSerrated5/64"1/16"Stainless Steel
    		1× 10^9 to 1× 10^10Static DissipativeNo————000000000000
    6 1/2"1 13/16"Spring AssistedSmooth5/64"3/64"Stainless Steel
    		1× 10^10AntistaticNo————000000000000
     
    back to top