These nozzles are made of FDA-listed materials.

These premium nozzles are engineered for the most efficient airflow consumption.

Control consumption and noise by adjusting the airflow.

Extend these telescoping nozzles to increase your reach.

Nozzles are attached to a flexible tube or hose that bends and holds its shape until you reposition it.

The magnetic base mounts to your work surface and has a control valve for adjusting airflow.

The included hose is ready to connect to your air supply.

Designed to reduce noise, these blowguns are quieter than similar standard guns.

These guns include a rubber tip that won't damage your workpiece.

These blowguns have a metal body.

The rubber tip won't damage parts.

Also known as air-shield and safety-shield blowguns, a center airstream blows away debris while an outer air curtain deflects flying chips and dust.

Operate a blowgun without disconnecting your air tool—these guns fit between the tool and air hose. Good for blowing away debris after using an air-powered sander or grinder.

Increase your reach with the telescoping nozzle.

These blowguns provide more than two times the airflow of standard guns.

The most powerful blowguns we sell, these use compressed air to clean and blow debris.

Air flows out of the side of the nozzle to clean air filters, radiators, and inside recesses.

Blow air backward from the nozzle to clean out the inside of pipes, tubes, and channels without pushing debris into your system.

Bend the stand's flexible arm to position your gun and keep it in place. Use the included foot pedal to activate airflow and static elimination.

Blow off dust and contamination, eliminate static charges, and guard against ESD (electrostatic discharge).

A nonconductive plastic nozzle and tip protect against accidental contact with live electrical circuits. These blowguns are tested to 1,000 volts to meet IEC 60900.

Clean surfaces without transferring dust or moisture from the air hose. These blowguns have a replaceable filter that traps particles such as rust and smoke and absorbs moisture.

Create a sheet of high-velocity air.

Use one bracket for 3" to 18" wide air knives; two brackets for 24" to 42" wide air knives, and three brackets for 48" wide air knives.

Dry and cool parts, wipe conveyor belts, control coating depth, and blow liquid, chips, and dust off of equipment in sanitary environments.

These produce the same airflow as standard static-eliminating air knives but are quieter and use 15% less compressed air.

Replace filters or add parts baskets and drum dollies to your parts cleaning vacuum/blowers. All of these filters and accessories can be used with compatible MiJET parts cleaners.

Combine high-volume airflow with low-heat output for warming and drying.

Use these blowers for production drying, heat shrinking, and other applications requiring heat over 1000°F.