McMaster-Carr logo
    Filter by
    System of Measurement
    Base Shape
    With Cushion
    Hex Nut Material
    Thread Type
    Industrial Info Compare
    Number of Mounting Holes
    Swivel Range of Motion
    Industrial Info Snippet
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    DFARS Specialty Metals
    Minimum Temperature
    Maximum Temperature
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    382 Products
    About Leveling Mounts
    industrial info icon

    Choose the right leveling mounts for your floor conditions, equipment weight, and vibration-control needs.

    Stay-Put Swivel Leveling Mounts with Threaded Stud

    Bolt down machines so they don’t creep across the floor or tip over. These mounts have one or more punch-out holes for securing equipment that you don’t need to move. The ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install these mounts in either threaded holes or unthreaded through holes at the bottom of equipment.
    Two Mounting Holes
    Image of Product. Front orientation. Leveling Mounts. Stay-Put Swivel Leveling Mounts with Threaded Stud, Two Mounting Holes, Without Cushion.
    Image of Product. Front orientation. Leveling Mounts. Stay-Put Swivel Leveling Mounts with Threaded Stud, Two Mounting Holes, With Cushion.

    Without

    Cushion

    With

    Cushion

    Glass-Filled Nylon Base and Zinc-Plated Steel Stud—These mounts are suitable for damp environments, but they won’t hold up to high-pressure washdowns and cleaners that contain harsh chemicals.
    Glass-Filled Nylon Base and 303 Stainless Steel Stud—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals.
    Rubber Cushion—A cushion under the base protects floors from scrapes and gouges.
    Mounting Holes
    Without Cushion
    With Rubber Cushion
    Thread Size
    Thread
    Lg.
    Swivel Range
    of Motion
    Base
    Dia.
    Fasteners
    Included
    Dia.
    Ctr.-to-Ctr.
    Lg.
    Cap. per
    Mount, lb.
    Overall
    Ht.
    Each
    Cap. per
    Mount, lb.
    Overall
    Ht.
    Cushion Material
    Each
    Glass-Filled Nylon Base and Zinc-Plated Steel Stud
    10-32
    1"7.5°2"No1/4"1 5/16"7002 1/8"2531K302000007002 3/16"Neoprene
    2531K314000000
    10-32
    2"7.5°2"No1/4"1 5/16"7003 1/8"2531K30300007003 3/16"Neoprene
    2531K31500000
    1/4"-20
    1 1/4"7.5°2"No1/4"1 5/16"1,0002 3/8"2531K304000001,0002 7/16"Neoprene
    2531K31600000
    1/4"-20
    2 1/2"7.5°2"No1/4"1 5/16"1,0003 5/8"2531K305000001,0003 11/16"Neoprene
    2531K31700000
    1/4"-28
    1 1/4"7.5°2"No1/4"1 5/16"7752 5/8"2531K30600000———0
    5/16"-18
    2"7.5°2"No1/4"1 5/16"2,5003 1/8"2531K307000002,5003 1/8"Neoprene
    2531K31800000
    5/16"-18
    4"7.5°2"No1/4"1 5/16"2,5005 1/8"2531K308000002,5005 3/16"Neoprene
    2531K31900000
    3/8"-16
    2"7.5°2"No1/4"1 5/16"3,7503 1/8"2531K309000003,7503 3/16"Neoprene
    2531K32100000
    3/8"-16
    3"7.5°3"No5/16"2 3/16"5,0004 1/8"2531K5900005,0004 3/16"Neoprene
    2531K6100000
    3/8"-16
    4"7.5°2"No1/4"1 5/16"4,0005 1/8"2531K3100004,0005 3/16"Neoprene
    2531K3200000
    3/8"-16
    4"7.5°3"No5/16"2 3/16"5,0005 1/8"2531K9100005,0005 3/16"Neoprene
    2531K9200000
    3/8"-16
    6"7.5°2"No1/4"1 5/16"4,0007 1/8"2531K24000004,0007 3/16"Neoprene
    2531K2500000
    3/8"-16
    6"7.5°3"No5/16"2 3/16"5,0007 1/8"2531K95000005,0007 3/16"Neoprene
    2531K9600000
    3/8"-16
    8"7.5°3"No5/16"2 3/16"5,0009 1/8"2531K101000005,0009 3/16"Neoprene
    2531K10200000
    3/8"-24
    2"7.5°2"No1/4"1 5/16"3,3003 1/8"2531K311000003,3003 3/16"Neoprene
    2531K32200000
    1/2"-13
    2"7.5°2"No1/4"1 5/16"———04,0003 3/16"Neoprene
    2531K32300000
    1/2"-13
    3"7.5°4"No7/16"2 11/16"5,0004 5/16"2531K123000005,0004 3/8"Neoprene
    2531K12400000
    1/2"-13
    4"7.5°2"No1/4"1 5/16"4,0005 1/8"2531K3500004,0005 3/16"Neoprene
    2531K3600000
    1/2"-13
    4"7.5°3"No5/16"2 3/16"5,0005 1/8"2531K3900005,0005 3/16"Neoprene
    2531K4100000
    1/2"-13
    4"7.5°4"No7/16"2 11/16"5,0005 5/16"2531K127000005,0005 3/8"Neoprene
    2531K12800000
    1/2"-13
    6"7.5°2"No1/4"1 5/16"4,0007 1/8"2531K105000004,0007 3/16"Neoprene
    2531K10600000
    1/2"-13
    6"7.5°3"No5/16"2 3/16"5,0007 1/8"2531K114000005,0007 3/16"Neoprene
    2531K11500000
    1/2"-13
    6"7.5°4"No7/16"2 11/16"5,0007 5/16"2531K132000005,0007 3/8"Neoprene
    2531K13300000
    1/2"-13
    8"7.5°2"No1/4"1 5/16"4,0009 1/8"2531K109000004,0009 3/16"Neoprene
    2531K11100000
    1/2"-13
    8"7.5°3"No5/16"2 3/16"5,0009 1/8"2531K118000005,0009 3/16"Neoprene
    2531K11900000
    1/2"-13
    8"7.5°4"No7/16"2 11/16"5,0009 5/16"2531K136000005,0009 3/8"Neoprene
    2531K13700000
    1/2"-20
    2"7.5°2"No1/4"1 5/16"3,8003 1/8"2531K31200003,2003 3/16"Neoprene
    2531K32400000
    5/8"-11
    2"7.5°3"No11/32"2 3/16"4,0003 1/8"2531K31300000———0
    5/8"-11
    3"7.5°2"No1/4"1 5/16"4,0004 1/8"2531K14100004,0004 3/16"Neoprene
    2531K14200000
    5/8"-11
    3"7.5°3"No5/16"2 3/16"5,0004 1/8"2531K158000005,0004 3/16"Neoprene
    2531K15900000
    5/8"-11
    3"7.5°4"No7/16"2 11/16"6,0004 5/16"2531K172000006,0004 3/8"Neoprene
    2531K17300000
    5/8"-11
    4"7.5°3"No5/16"2 3/16"5,0005 1/8"2531K48000005,0005 3/16"Neoprene
    2531K4900000
    5/8"-11
    4"7.5°4"No7/16"2 11/16"6,0005 5/16"2531K176000006,0005 3/8"Neoprene
    2531K17700000
    5/8"-11
    6"7.5°2"No1/4"1 5/16"4,0007 1/8"2531K149000004,0007 3/16"Neoprene
    2531K15100000
    5/8"-11
    6"7.5°3"No5/16"2 3/16"5,0007 1/8"2531K163000005,0007 3/16"Neoprene
    2531K16400000
    5/8"-11
    6"7.5°4"No7/16"2 11/16"6,0007 5/16"2531K66000006,0007 3/8"Neoprene
    2531K6700000
    5/8"-11
    8"7.5°3"No5/16"2 3/16"5,0009 1/8"2531K167000005,0009 3/16"Neoprene
    2531K16800000
    5/8"-11
    8"7.5°4"No7/16"2 11/16"6,0009 5/16"2531K181000006,0009 3/8"Neoprene
    2531K18200000
    5/8"-11
    10"7.5°5"No1/2"3 7/8"10,00012 1/4"2531K1980000010,00012 9/16"Neoprene
    2531K19900000
    3/4"-10
    2"7.5°3"No11/32"2 3/16"———04,0003 3/16"Neoprene
    2531K32500000
    3/4"-10
    4"7.5°3"No5/16"2 3/16"5,0005 1/8"2531K203000005,0005 3/16"Neoprene
    2531K20400000
    3/4"-10
    4"7.5°4"No7/16"2 11/16"7,5005 5/16"2531K216000007,5005 3/8"Neoprene
    2531K21700000
    3/4"-10
    4"7.5°5"No1/2"3 7/8"10,0006 1/4"2531K2250000010,0006 9/16"Neoprene
    2531K22600000
    3/4"-10
    6"7.5°3"No5/16"2 3/16"5,0007 1/8"2531K207000005,0007 3/16"Neoprene
    2531K20800000
    3/4"-10
    6"7.5°4"No7/16"2 11/16"7,5007 5/16"2531K71000007,5007 3/8"Neoprene
    2531K7200000
    3/4"-10
    6"7.5°5"No1/2"3 7/8"10,0008 1/4"2531K850000010,0008 9/16"Neoprene
    2531K8600000
    3/4"-10
    8"7.5°3"No5/16"2 3/16"5,0009 1/8"2531K212000005,0009 3/16"Neoprene
    2531K21300000
    3/4"-10
    8"7.5°4"No7/16"2 11/16"7,5009 5/16"2531K221000007,5009 3/8"Neoprene
    2531K22200000
    3/4"-10
    8"7.5°5"No1/2"3 7/8"10,00010 1/4"2531K2290000010,00010 9/16"Neoprene
    2531K23100000
    3/4"-10
    10"7.5°5"No1/2"3 7/8"10,00012 1/4"2531K2340000010,00012 9/16"Neoprene
    2531K23500000
    1"-8
    6"7.5°5"No1/2"3 7/8"10,0008 1/4"2531K110000010,0008 9/16"Neoprene
    2531K1700000
    1"-8
    8"7.5°4 3/8"No13/32"2 31/32"———02,7009 11/16"Natural Rubber/SBR2531K30100000
    M10 × 1.5 mm76 mm7.5°51 mmNo6.4 mm33.8 mm4,000105 mm6992K11000004,000106.6 mmNeoprene
    6992K3500000
    M10 × 1.5 mm76 mm7.5°76 mmNo8.9 mm55.9 mm5,000104 mm6992K103000005,000105.6 mmNeoprene
    6992K35400000
    M10 × 1.5 mm102 mm7.5°51 mmNo6.4 mm33.8 mm4,000130 mm6992K12000004,000131.6 mmNeoprene
    6992K3600000
    M10 × 1.5 mm102 mm7.5°76 mmNo8.9 mm55.9 mm5,000130 mm6992K1300005,000131.6 mmNeoprene
    6992K3700000
    M10 × 1.5 mm152 mm7.5°51 mmNo6.4 mm33.8 mm4,000181 mm6992K109000004,000182.6 mmNeoprene
    6992K35700000
    M10 × 1.5 mm152 mm7.5°76 mmNo8.9 mm55.9 mm5,000181 mm6992K12900000———0
    M10 × 1.5 mm203 mm7.5°76 mmNo8.9 mm55.9 mm5,000232 mm6992K121000005,000233.6 mmNeoprene
    6992K36800000
    M12 × 1.75 mm76 mm7.5°51 mmNo6.4 mm33.8 mm4,000105 mm6992K1400004,000106.6 mmNeoprene
    6992K3800000
    M12 × 1.75 mm76 mm7.5°102 mmNo12.5 mm68.8 mm5,000109 mm6992K13200000———0
    M12 × 1.75 mm76 mm7.5°102 mmNo11.9 mm68.8 mm———05,000110.6 mmNeoprene
    6992K39100000
    M12 × 1.75 mm102 mm7.5°51 mmNo6.4 mm33.8 mm4,000130 mm6992K15000004,000131.6 mmNeoprene
    6992K3900000
    M12 × 1.75 mm102 mm7.5°76 mmNo8.9 mm55.9 mm5,000130 mm6992K143000005,000131.6 mmNeoprene
    6992K41800000
    M12 × 1.75 mm102 mm7.5°102 mmNo11.9 mm68.8 mm5,000135 mm6992K144000005,000136.6 mmNeoprene
    6992K44300000
    M12 × 1.75 mm152 mm7.5°51 mmNo6.4 mm33.8 mm4,000181 mm6992K1600004,000182.6 mmNeoprene
    6992K4100000
    M12 × 1.75 mm152 mm7.5°76 mmNo8.9 mm55.9 mm5,000181 mm6992K1700000———0
    M12 × 1.75 mm152 mm7.5°102 mmNo11.9 mm68.8 mm5,000185 mm6992K18000005,000186.6 mmNeoprene
    6992K4300000
    M12 × 1.75 mm203 mm7.5°51 mmNo6.4 mm33.8 mm4,000232 mm6992K166000004,000233.6 mmNeoprene
    6992K45200000
    M12 × 1.75 mm203 mm7.5°76 mmNo8.9 mm55.9 mm———05,000233.6 mmNeoprene
    6992K45900000
    M12 × 1.75 mm203 mm7.5°102 mmNo11.9 mm68.8 mm5,000236 mm6992K187000005,000237.6 mmNeoprene
    6992K46700000
    M16 × 2 mm76 mm7.5°51 mmNo6.4 mm33.8 mm4,000105 mm6992K18900000———0
    M16 × 2 mm76 mm7.5°76 mmNo8.9 mm55.9 mm5,000104 mm6992K202000005,000105.6 mmNeoprene
    6992K47200000
    M16 × 2 mm76 mm7.5°102 mmNo11.9 mm68.8 mm6,000109 mm6992K204000006,000110.6 mmNeoprene
    6992K47600000
    M16 × 2 mm102 mm7.5°76 mmNo8.9 mm55.9 mm5,000130 mm6992K19000005,000131.6 mmNeoprene
    6992K4400000
    M16 × 2 mm102 mm7.5°102 mmNo11.9 mm68.8 mm6,000135 mm6992K215000006,000136.6 mmNeoprene
    6992K48100000
    M16 × 2 mm152 mm7.5°51 mmNo6.4 mm33.8 mm4,000181 mm6992K235000004,000182.6 mmNeoprene
    6992K48300000
    M16 × 2 mm152 mm7.5°76 mmNo8.9 mm55.9 mm5,000181 mm6992K253000005,000182.6 mmNeoprene
    6992K49200000
    M16 × 2 mm152 mm7.5°102 mmNo11.9 mm68.8 mm6,000185 mm6992K21000006,000186.6 mmNeoprene
    6992K4500000
    M16 × 2 mm203 mm7.5°76 mmNo8.9 mm55.9 mm5,000232 mm6992K263000005,000233.6 mmNeoprene
    6992K50500000
    M16 × 2 mm203 mm7.5°102 mmNo11.9 mm68.8 mm6,000236 mm6992K267000006,000237.6 mmNeoprene
    6992K50600000
    M16 × 2 mm254 mm7.5°127 mmNo12 mm98 mm10,000311 mm6992K2740000010,000312.6 mmNeoprene
    6992K50700000
    M20 × 2.5 mm102 mm7.5°76 mmNo8.9 mm55.9 mm5,000130 mm6992K28000005,000131.6 mmNeoprene
    6992K51700000
    M20 × 2.5 mm102 mm7.5°102 mmNo11.9 mm68.8 mm7,500135 mm6992K29000007,500136.6 mmNeoprene
    6992K53400000
    M20 × 2.5 mm152 mm7.5°76 mmNo8.9 mm55.9 mm5,000181 mm6992K295000005,000182.6 mmNeoprene
    6992K54200000
    M20 × 2.5 mm152 mm7.5°102 mmNo11.9 mm68.8 mm7,500185 mm6992K22000007,500186.6 mmNeoprene
    6992K4600000
    M20 × 2.5 mm152 mm7.5°127 mmNo12 mm98 mm10,000210 mm6992K2400000———0
    M20 × 2.5 mm203 mm7.5°76 mmNo8.9 mm55.9 mm5,000232 mm6992K296000005,000233.6 mmNeoprene
    6992K56200000
    M20 × 2.5 mm203 mm7.5°102 mmNo11.9 mm68.8 mm7,500236 mm6992K298000007,500237.6 mmNeoprene
    6992K56700000
    M20 × 2.5 mm203 mm7.5°127 mmNo12 mm98 mm10,000260 mm6992K32200000———0
    M20 × 2.5 mm254 mm7.5°127 mmNo12 mm98 mm10,000311 mm6992K3340000010,000312.6 mmNeoprene
    6992K600000
    M24 × 3 mm152 mm7.5°102 mmNo11.9 mm68.8 mm7,500185 mm6992K25000007,500186.6 mmNeoprene
    6992K4900000
    M24 × 3 mm152 mm7.5°127 mmNo12 mm98 mm10,000210 mm6992K270000010,000211.6 mmNeoprene
    6992K75300000
     
    Glass-Filled Nylon Base and 303 Stainless Steel Stud
    3/8"-16
    3"7.5°3"No5/16"2 3/16"5,0004 1/8"2531K84000005,0004 3/16"Neoprene
    2531K8900000
    3/8"-16
    4"7.5°2"No1/4"1 5/16"4,0005 1/8"2531K33000004,0005 3/16"Neoprene
    2531K3400000
    3/8"-16
    4"7.5°3"No5/16"2 3/16"5,0005 1/8"2531K93000005,0005 3/16"Neoprene
    2531K9400000
    3/8"-16
    6"7.5°2"No1/4"1 5/16"4,0007 1/8"2531K44000004,0007 3/16"Neoprene
    2531K4500000
    3/8"-16
    6"7.5°3"No5/16"2 3/16"5,0007 1/8"2531K97000005,0007 3/16"Neoprene
    2531K9800000
    3/8"-16
    8"7.5°3"No5/16"2 3/16"5,0009 1/8"2531K103000005,0009 3/16"Neoprene
    2531K10400000
    1/2"-13
    3"7.5°4"No7/16"2 11/16"5,0004 5/16"2531K125000005,0004 3/8"Neoprene
    2531K12600000
    1/2"-13
    4"7.5°2"No1/4"1 5/16"4,0005 1/8"2531K37000004,0005 3/16"Neoprene
    2531K3800000
    1/2"-13
    4"7.5°3"No5/16"2 3/16"5,0005 1/8"2531K42000005,0005 3/16"Neoprene
    2531K4300000
    1/2"-13
    4"7.5°4"No7/16"2 11/16"5,0005 5/16"2531K129000005,0005 3/8"Neoprene
    2531K13100000
    1/2"-13
    6"7.5°2"No1/4"1 5/16"4,0007 1/8"2531K107000004,0007 3/16"Neoprene
    2531K10800000
    1/2"-13
    6"7.5°3"No5/16"2 3/16"5,0007 1/8"2531K116000005,0007 3/16"Neoprene
    2531K11700000
    1/2"-13
    6"7.5°4"No7/16"2 11/16"5,0007 5/16"2531K134000005,0007 3/8"Neoprene
    2531K13500000
    1/2"-13
    8"7.5°2"No1/4"1 5/16"4,0009 1/8"2531K112000004,0009 3/16"Neoprene
    2531K11300000
    1/2"-13
    8"7.5°3"No5/16"2 3/16"5,0009 1/8"2531K121000005,0009 3/16"Neoprene
    2531K12200000
    1/2"-13
    8"7.5°4"No7/16"2 11/16"5,0009 5/16"2531K138000005,0009 3/8"Neoprene
    2531K13900000
    5/8"-11
    3"7.5°2"No1/4"1 5/16"4,0004 1/8"2531K143000004,0004 3/16"Neoprene
    2531K14400000
    5/8"-11
    3"7.5°3"No5/16"2 3/16"5,0004 1/8"2531K161000005,0004 3/16"Neoprene
    2531K16200000
    5/8"-11
    3"7.5°4"No7/16"2 11/16"6,0004 5/16"2531K174000006,0004 3/8"Neoprene
    2531K17500000
    5/8"-11
    4"7.5°3"No5/16"2 3/16"5,0005 1/8"2531K51000005,0005 3/16"Neoprene
    2531K5200000
    5/8"-11
    4"7.5°4"No7/16"2 11/16"6,0005 5/16"2531K178000006,0005 3/8"Neoprene
    2531K17900000
    5/8"-11
    6"7.5°2"No1/4"1 5/16"4,0007 1/8"2531K152000004,0007 3/16"Neoprene
    2531K15300000
    5/8"-11
    6"7.5°3"No5/16"2 3/16"5,0007 1/8"2531K165000005,0007 3/16"Neoprene
    2531K16600000
    5/8"-11
    6"7.5°4"No7/16"2 11/16"6,0007 5/16"2531K68000006,0007 3/8"Neoprene
    2531K6900000
    5/8"-11
    8"7.5°3"No5/16"2 3/16"5,0009 1/8"2531K169000005,0009 3/16"Neoprene
    2531K17100000
    5/8"-11
    8"7.5°4"No7/16"2 11/16"6,0009 5/16"2531K183000006,0009 3/8"Neoprene
    2531K18400000
    5/8"-11
    10"7.5°5"No1/2"3 7/8"10,00012 1/4"2531K2010000010,00012 9/16"Neoprene
    2531K20200000
    3/4"-10
    4"7.5°3"No5/16"2 3/16"5,0005 1/8"2531K205000005,0005 3/16"Neoprene
    2531K20600000
    3/4"-10
    4"7.5°4"No7/16"2 11/16"7,5005 5/16"2531K218000007,5005 3/8"Neoprene
    2531K21900000
    3/4"-10
    4"7.5°5"No1/2"3 7/8"10,0006 1/4"2531K2270000010,0006 9/16"Neoprene
    2531K22800000
    3/4"-10
    6"7.5°3"No5/16"2 3/16"5,0007 1/8"2531K209000005,0007 3/16"Neoprene
    2531K21100000
    3/4"-10
    6"7.5°4"No7/16"2 11/16"7,5007 5/16"2531K73000007,5007 3/8"Neoprene
    2531K7400000
    3/4"-10
    6"7.5°5"No1/2"3 7/8"10,0008 1/4"2531K870000010,0008 9/16"Neoprene
    2531K8800000
    3/4"-10
    8"7.5°3"No5/16"2 3/16"5,0009 1/8"2531K214000005,0009 3/16"Neoprene
    2531K21500000
    3/4"-10
    8"7.5°4"No7/16"2 11/16"7,5009 5/16"2531K223000007,5009 3/8"Neoprene
    2531K22400000
    3/4"-10
    8"7.5°5"No1/2"3 7/8"10,00010 1/4"2531K2320000010,00010 9/16"Neoprene
    2531K23300000
    3/4"-10
    10"7.5°5"No1/2"3 7/8"10,00012 1/4"2531K2360000010,00012 9/16"Neoprene
    2531K23700000
    1"-8
    6"7.5°5"No1/2"3 7/8"10,0008 1/4"2531K140000010,0008 9/16"Neoprene
    2531K2100000
    M10 × 1.5 mm76 mm7.5°76 mmNo8.9 mm55.9 mm5,000104 mm6992K61100000———0
    M10 × 1.5 mm102 mm7.5°80 mmNo8.9 mm55.9 mm5,000130 mm6992K65000005,000131.6 mmNeoprene
    6992K8400000
    M12 × 1.75 mm76 mm7.5°51 mmNo6.4 mm33.8 mm4,000105 mm6992K66000004,000106.6 mmNeoprene
    6992K8500000
    M12 × 1.75 mm102 mm7.5°76 mmNo8.9 mm55.9 mm5,000130 mm6992K61200000———0
    M12 × 1.75 mm102 mm7.5°102 mmNo11.9 mm68.8 mm5,000135 mm6992K61300000———0
    M12 × 1.75 mm152 mm7.5°51 mmNo6.4 mm33.8 mm4,000181 mm6992K68000004,000182.6 mmNeoprene
    6992K8700000
    M12 × 1.75 mm152 mm7.5°102 mmNo11.9 mm68.8 mm5,000185 mm6992K71000005,000186.6 mmNeoprene
    6992K8900000
    M16 × 2 mm102 mm7.5°80 mmNo8.9 mm55.9 mm5,000130 mm6992K72000005,000131.6 mmNeoprene
    6992K9100000
    M16 × 2 mm152 mm7.5°102 mmNo11.9 mm68.8 mm6,000185 mm6992K73000006,000186.6 mmNeoprene
    6992K9200000
    M16 × 2 mm203 mm7.5°76 mmNo8.9 mm55.9 mm———05,000233.6 mmNeoprene
    6992K61500000
    M16 × 2 mm254 mm7.5°127 mmNo12.7 mm98.4 mm10,000311 mm6992K61400000———0
    M20 × 2.5 mm152 mm7.5°102 mmNo11.9 mm68.8 mm7,500185 mm6992K74000007,500186.6 mmNeoprene
    6992K9300000
     
    One Offset Mounting Hole
    Image of Product. Front orientation. Leveling Mounts. Stay-Put Swivel Leveling Mounts with Threaded Stud, One Offset Mounting Hole, Without Cushion.

    Without

    Cushion

    Image of Product. Front orientation. Leveling Mounts. Stay-Put Swivel Leveling Mounts with Threaded Stud, One Offset Mounting Hole, With Cushion.

    With Cushion

    The mounting hole extends out from underneath your machine to give you more room to drill and install fasteners.
    Glass-Filled Nylon Base and Zinc-Plated Steel Stud—These mounts are suitable for damp environments, but they won’t hold up to high-pressure washdowns and cleaners that contain harsh chemicals.
    Glass-Filled Nylon Base and 303 Stainless Steel Stud—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals.
    Rubber Cushion—A cushion under the base protects floors from scrapes and gouges.
    Base
    Mounting
    Holes
    Without Cushion
    With Rubber Cushion
    Thread
    Size
    Thread
    Lg.
    Cap. per
    Mount, lb.
    Swivel Range
    of Motion
    Lg.
    Wd.
    Fasteners
    Included
    Dia.
    Overall
    Ht.
    Each
    Overall
    Ht.
    Cushion
    Material
    Each
    Glass-Filled Nylon Base and Zinc-Plated Steel Stud
    1/2"-13
    4"5,0007.5°5 7/16"4"No1/2"5 5/16"6144K110000005 1/2"Neoprene
    6144K51000000
    1/2"-13
    6"5,0007.5°5 7/16"4"No1/2"7 5/16"6144K12000007 1/2"Neoprene
    6144K5200000
    1/2"-13
    8"5,0007.5°5 7/16"4"No1/2"9 5/16"6144K13000009 1/2"Neoprene
    6144K5300000
    5/8"-11
    4"6,0007.5°5 7/16"4"No1/2"5 5/16"6144K14000005 1/2"Neoprene
    6144K5400000
    5/8"-11
    6"6,0007.5°5 7/16"4"No1/2"7 5/16"6144K15000007 1/2"Neoprene
    6144K5500000
    5/8"-11
    8"6,0007.5°5 7/16"4"No1/2"9 5/16"6144K16000009 1/2"Neoprene
    6144K5600000
    3/4"-10
    4"7,5007.5°5 7/16"4"No1/2"5 5/16"6144K17000005 1/2"Neoprene
    6144K5700000
    3/4"-10
    6"7,5007.5°5 7/16"4"No1/2"7 5/16"6144K18000007 1/2"Neoprene
    6144K5800000
    3/4"-10
    8"7,5007.5°5 7/16"4"No1/2"9 5/16"6144K19000009 1/2"Neoprene
    6144K5900000
    1"-8
    6"7,5007.5°5 7/16"4"No1/2"7 5/16"6144K22000007 1/2"Neoprene
    6144K6200000
     
    Glass-Filled Nylon Base and 303 Stainless Steel Stud
    1/2"-13
    4"5,0007.5°5 7/16"4"No9/16"5 5/16"6144K31000005 1/2"Neoprene
    6144K7100000
    1/2"-13
    8"5,0007.5°5 7/16"4"No9/16"9 5/16"6144K33000009 1/2"Neoprene
    6144K7300000
    5/8"-11
    4"6,0007.5°5 7/16"4"No9/16"5 5/16"6144K34000005 1/2"Neoprene
    6144K7400000
    5/8"-11
    8"6,0007.5°5 7/16"4"No9/16"9 5/16"6144K36000009 1/2"Neoprene
    6144K7600000
    3/4"-10
    4"7,5007.5°5 7/16"4"No9/16"5 5/16"6144K37000005 1/2"Neoprene
    6144K7700000
     

    Stay-Put Vibration-Damping Swivel Leveling Mounts with Threaded Stud

    Bolt down machines so they don’t creep across the floor or tip over. These mounts have one or more holes for securing equipment that you don’t need to move. They also have a rubber cushion that reduces vibration to extend your machine’s life. The ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install these mounts in either threaded holes or unthreaded through holes at the bottom of equipment.
    One Offset Mounting Hole
    Image of Product. Front orientation. Leveling Mounts. Stay-Put Vibration-Damping Swivel Leveling Mounts with Threaded Stud, One Offset Mounting Hole, With Cushion.

    With Cushion

    The mounting hole extends out from underneath your machine to give you more room to drill and install fasteners.
    304 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.
    316 Stainless Steel Base—Our most corrosion-resistant metal mounts, these hold up in just about any environment. They won’t degrade or become pitted, even when exposed to harsh cleaners and chemicals.
    Rubber Cushion—In addition to reducing vibration, the cushion cuts down on noise and protects floors from scrapes and gouges.
    Mounting
    Holes
    With Rubber Cushion
    Thread Size
    Thread
    Lg.
    Swivel Range
    of Motion
    Base
    Dia.
    Fasteners
    Included
    Dia.
    Cap. per
    Mount, lb.
    Deflection
    @ Cap.
    Overall
    Ht.
    Cushion
    Material
    Each
    304 Stainless Steel Base and Stud
    3/8"-16
    4"2 15/16"No19/32"1,795Not Rated4 7/8"Buna-N
    6221K311000000
    1/2"-13
    4"2 15/16"No19/32"1,770Not Rated4 7/8"Buna-N
    6221K1600000
    1/2"-13
    4"3 15/16"No19/32"2,220Not Rated5 1/4"Buna-N
    6221K9100000
    5/8"-11
    4"2 15/16"No19/32"1,770Not Rated4 7/8"Buna-N
    6221K3700000
    5/8"-11
    4"3 15/16"No19/32"2,220Not Rated5 1/4"Buna-N
    6221K8400000
    5/8"-11
    6"2 15/16"No19/32"1,770Not Rated6 7/8"Buna-N
    6221K3800000
    5/8"-11
    6"3 15/16"No19/32"2,220Not Rated7 1/4"Buna-N
    6221K8500000
    3/4"-10
    4"2 15/16"No19/32"2,695Not Rated4 7/8"Buna-N
    6221K31200000
    3/4"-10
    4"3 15/16"No19/32"3,145Not Rated5 1/4"Buna-N
    6221K31300000
    3/4"-10
    6"2 15/16"No19/32"1,770Not Rated6 7/8"Buna-N
    6221K1900000
    3/4"-10
    6"3 15/16"No19/32"2,220Not Rated7 1/4"Buna-N
    6221K9800000
    1"-8
    4"2 15/16"No19/32"2,695Not Rated4 7/8"Buna-N
    6221K31400000
    M8 × 1.25 mm2"3 3/16"No1/2"1,795Not Rated2 5/8"Buna-N
    6221K31800000
    M10 × 1.5 mm2"2 15/16"No3/8"2,540Not Rated2 7/8"Buna-N
    6221K31500000
    M12 × 1.75 mm4"2 15/16"No19/32"1,770Not Rated4 7/8"Buna-N
    6221K92500000
    M16 × 2 mm4"2 15/16"No19/32"1,770Not Rated4 7/8"Buna-N
    6221K92600000
    M16 × 2 mm5 5/8"2 15/16"No19/32"1,770Not Rated6 7/8"Buna-N
    6221K92700000
    M20 × 2.5 mm6"2 15/16"No19/32"1,770Not Rated6 7/8"Buna-N
    6221K92800000
     
    316 Stainless Steel Base and Stud
    1/2"-13
    4"2 15/16"No19/32"2,700Not Rated4 7/8"Buna-N
    6810N1100000
    1/2"-13
    4"3 15/16"No19/32"3,150Not Rated5 1/4"Buna-N
    6810N1200000
    5/8"-11
    4"2 15/16"No19/32"2,700Not Rated4 7/8"Buna-N
    6810N1300000
    5/8"-11
    4"3 15/16"No19/32"3,150Not Rated5 1/4"Buna-N
    6810N1400000
    5/8"-11
    6"2 15/16"No19/32"2,700Not Rated6 7/8"Buna-N
    6810N1500000
    5/8"-11
    6"3 15/16"No19/32"3,150Not Rated7 1/4"Buna-N
    6810N1600000
    3/4"-10
    6"2 15/16"No19/32"2,700Not Rated6 7/8"Buna-N
    6810N1700000
    3/4"-10
    6"3 15/16"No19/32"3,150Not Rated7 1/4"Buna-N
    6810N1800000
     
    Two Offset Mounting Holes
    Image of Product. Front orientation. Leveling Mounts. Stay-Put Vibration-Damping Swivel Leveling Mounts with Threaded Stud, Two Offset Mounting Holes, With Cushion.

    With Cushion

    The mounting holes extend out from underneath your machine to give you more room to drill and install fasteners.
    304 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.
    Rubber Cushion—In addition to reducing vibration, the cushion cuts down on noise and protects floors from scrapes and gouges.
    Mounting Holes
    With Rubber Cushion
    Thread
    Size
    Thread
    Lg.
    Swivel Range
    of Motion
    Base
    Dia.
    Fasteners
    Included
    Dia.
    Ctr.-to-Ctr.
    Lg.
    Cap. per
    Mount, lb.
    Deflection
    @ Cap.
    Overall
    Ht.
    Cushion
    Material
    Each
    304 Stainless Steel Base and Stud
    3/8"-16
    4"2 15/16"No19/32"4 1/8"1,795Not Rated4 7/8"Buna-N
    6221K316000000
    1/2"-13
    4"2 15/16"No19/32"4 1/8"1,770Not Rated4 7/8"Buna-N
    6221K92100000
    5/8"-11
    4"2 15/16"No19/32"4 1/8"1,770Not Rated4 7/8"Buna-N
    6221K92200000
    5/8"-11
    6"2 15/16"No19/32"4 1/8"1,770Not Rated6 7/8"Buna-N
    6221K92300000
    3/4"-10
    6"2 15/16"No19/32"4 1/8"1,770Not Rated6 7/8"Buna-N
    6221K92400000
    1"-8
    4"2 15/16"No19/32"4 1/8"2,695Not Rated4 7/8"Buna-N
    6221K31700000
     

    Stay-Put Swivel Leveling Mounts with Threaded Hole

    Bolt down machines so they don’t creep across the floor or tip over. These mounts have punch-out holes for securing equipment that you don’t need to move. The ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. Add your own stud to create a custom-length mount that you can install in either threaded holes or unthreaded through holes.
    Two Mounting Holes
    Image of Product. Front orientation. Leveling Mounts. Stay-Put Swivel Leveling Mounts with Threaded Hole, Two Mounting Holes, Without Cushion.
    Image of Product. Front orientation. Leveling Mounts. Stay-Put Swivel Leveling Mounts with Threaded Hole, Two Mounting Holes, With Cushion.

    Without

    Cushion

    With Cushion

    Glass-Filled Nylon Base and Zinc-Plated Steel Hex Nut—These mounts are suitable for damp environments, but they won’t hold up to high-pressure washdowns and cleaners that contain harsh chemicals.
    Glass-Filled Nylon Base and 303 Stainless Steel Hex Nut—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals.
    Rubber Cushion—A cushion under the base protects floors from scrapes and gouges.
    Mounting Holes
    Without Cushion
    With Rubber Cushion
    Thread
    Size
    Thread
    Dp.
    Cap. per
    Mount, lb.
    Swivel Range
    of Motion
    Base
    Dia.
    Fasteners
    Included
    Dia.
    Ctr.-to-Ctr.
    Lg.
    Overall
    Ht.
    Each
    Overall
    Ht.
    Cushion
    Material
    Each
    Glass-Filled Nylon Base and Zinc-Plated Steel Hex Nut
    3/8"-16
    3/8"3,5007.5°4"No7/16"2 11/16"1 5/8"60985K34000001 11/16"Neoprene
    60985K35000000
    1/2"-13
    7/16"4,0007.5°2"No1/4"1 5/16"1 5/8"60985K6200001 11/16"Neoprene
    60985K7300000
    1/2"-13
    7/16"5,0007.5°4"No7/16"2 11/16"1 13/16"60985K38000001 7/8"Neoprene
    60985K3900000
    5/8"-11
    7/16"5,0007.5°3"No5/16"2 3/16"1 11/16"60985K1300001 3/4"Neoprene
    60985K2300000
    5/8"-11
    7/16"6,0007.5°4"No7/16"2 11/16"1 7/8"60985K87000001 15/16"Neoprene
    60985K8800000
    3/4"-10
    11/16"7,5007.5°4"No7/16"2 11/16"2"60985K63000002 1/16"Neoprene
    60985K7400000
    1"-8
    13/16"7,5007.5°4"No7/16"2 11/16"2 3/8"60985K101000002 7/16"Neoprene
    60985K10200000
    1"-8
    13/16"10,0007.5°5"No1/2"3 7/8"3"60985K64000003 5/16"Neoprene
    60985K7500000
     
    Glass-Filled Nylon Base and 303 Stainless Steel Hex Nut
    3/8"-16
    3/8"3,5007.5°4"No7/16"2 11/16"1 5/8"60985K36000001 11/16"Neoprene
    60985K3700000
    1/2"-13
    7/16"4,0007.5°2"No1/4"1 5/16"1 5/8"60985K67000001 11/16"Neoprene
    60985K7800000
    1/2"-13
    7/16"5,0007.5°4"No7/16"2 11/16"1 13/16"60985K49000001 7/8"Neoprene
    60985K5900000
    5/8"-11
    7/16"5,0007.5°3"No5/16"2 3/16"1 11/16"60985K43000001 3/4"Neoprene
    60985K5300000
    5/8"-11
    7/16"6,0007.5°4"No7/16"2 11/16"1 7/8"60985K89000001 15/16"Neoprene
    60985K9100000
    3/4"-10
    11/16"7,5007.5°4"No7/16"2 11/16"2"60985K68000002 1/16"Neoprene
    60985K7900000
    1"-8
    13/16"7,5007.5°4"No7/16"2 11/16"2 3/8"60985K103000002 7/16"Neoprene
    60985K10400000
    1"-8
    13/16"10,0007.5°5"No1/2"3 7/8"3"60985K69000003 5/16"Neoprene
    60985K8100000
     

    Stay-Put Sanitary Vibration-Damping Swivel Leveling Mounts with Threaded Stud

    Free of crevices where bacteria can grow, these mounts have an extremely smooth finish, rounded edges, and a covered stud. A silicone seal at the base of the thread cover keeps contaminants out. The seal is made with chemical additives, so you can find it with an X-ray machine if it falls into your line. Mounts are certified by 3-A, EHEDG, and USDA to meet sanitary design standards. You can also bolt them down so machines don’t creep across the floor or tip over. The rubber cushion on the bottom reduces vibration to extend your machine’s life. In addition, the ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install these mounts in either threaded holes or unthreaded through holes at the bottom of equipment.
    Two Mounting Holes
    Image of Product. Front orientation. Leveling Mounts. Stay-Put Sanitary Vibration-Damping Swivel Leveling Mounts with Threaded Stud, Two Mounting Holes, With Cushion.
    Image of Attribute. Front orientation. Contains Annotated. Stay-Put Sanitary Vibration-Damping Swivel Leveling Mounts with Threaded Stud.

    With Cushion

    304 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.
    Rubber Cushion—In addition to reducing vibration, the cushion cuts down on noise and protects floors from scrapes and gouges.
    Cap Nuts—Cover and protect exposed threads. These nuts are free of crevices where bacteria can grow and have a silicone seal to keep out contaminants. The seal is metal- and X-ray detectable in case it falls into your line.
    Leveling Mounts
    Cap Nuts
    Mounting Holes
    With Rubber Cushion
    Thread
    Size
    Thread
    Lg.
    Mounting Ht.
    Swivel Range
    of Motion
    Base
    Dia.
    Fasteners
    Included
    Dia.
    Ctr.-to-Ctr.
    Lg.
    Food Industry Std.
    Cap. per
    Mount, lb.
    Deflection
    @ Cap.
    Overall
    Ht.
    Cushion
    Material
    Each
    Each
    304 Stainless Steel Base and Stud
    5/8"-11
    2 7/8"4" to 5 3/8"3 1/8"No11/32"2 1/4"3-A Certified 88-00, FDA Compliant 21 CFR 177.2600
    6,800Not Rated6 7/8"Buna-N
    6903N19000000097513A101000000
    5/8"-11
    4 1/8"5 3/16" to 7 3/4"3 1/8"No11/32"2 1/4"3-A Certified 88-00, FDA Compliant 21 CFR 177.2600
    5,400Not Rated9 1/4"Buna-N
    6903N2100000097513A10100000
    3/4"-10
    2 7/8"4" to 5 3/8"4 1/16"No1/2"3 1/8"3-A Certified 88-00, FDA Compliant 21 CFR 177.2600
    9,800Not Rated6 7/8"Buna-N
    6903N2200000097513A10200000
    3/4"-10
    4 1/8"5 3/16" to 7 3/4"4 1/16"No1/2"3 1/8"3-A Certified 88-00, FDA Compliant 21 CFR 177.2600
    9,800Not Rated9 1/4"Buna-N
    6903N2300000097513A10200000
    1"-8
    2 7/8"4" to 5 3/8"4 1/16"No1/2"3 1/8"3-A Certified 88-00, FDA Compliant 21 CFR 177.2600
    17,400Not Rated6 7/8"Buna-N
    6903N24000000———0
    1"-8
    4 1/8"5 3/16" to 7 3/4"4 1/16"No1/2"3 1/8"3-A Certified 88-00, FDA Compliant 21 CFR 177.2600
    17,400Not Rated9 1/4"Buna-N
    6903N25000000———0
     
    One Offset Mounting Hole
    Image of Product. Front orientation. Leveling Mounts. Stay-Put Sanitary Vibration-Damping Swivel Leveling Mounts with Threaded Stud, One Offset Mounting Hole, With Cushion.
    Image of Attribute. Front orientation. Contains Annotated. Stay-Put Sanitary Vibration-Damping Swivel Leveling Mounts with Threaded Stud.

    With Cushion

    The mounting hole extends out from underneath your machine to give you more room to drill and install fasteners.
    304 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.
    Rubber Cushion—In addition to reducing vibration, the cushion cuts down on noise and protects floors from scrapes and gouges.
    Cap Nuts—Cover and protect exposed threads. These nuts are free of crevices where bacteria can grow and have a silicone seal to keep out contaminants. The seal is metal- and X-ray detectable in case it falls into your line.
    Leveling Mounts
    Cap Nuts
    Mounting
    Holes
    With Rubber Cushion
    Thread Size
    Thread
    Lg.
    Mounting Ht.
    Swivel Range
    of Motion
    Base
    Dia.
    Fasteners
    Included
    Dia.
    Food Industry Std.
    Cap. per
    Mount, lb.
    Deflection
    @ Cap.
    Overall
    Ht.
    Cushion
    Material
    Each
    Each
    304 Stainless Steel Base and Stud
    5/8"-11
    2 7/8"4 5/16" to 5 11/16"10°3 1/8"No19/32"3-A Certified 88-00, FDA Compliant 21 CFR 177.2600
    3,300Not Rated7 3/16"Buna-N
    6903N1100000097513A101000000
    5/8"-11
    4 1/8"5 1/2" to 8 1/16"10°3 1/8"No19/32"3-A Certified 88-00, FDA Compliant 21 CFR 177.2600
    3,300Not Rated9 9/16"Buna-N
    6903N120000097513A10100000
    3/4"-10
    2 7/8"4 5/16" to 5 11/16"10°3 1/8"No19/32"3-A Certified 88-00, FDA Compliant 21 CFR 177.2600
    3,300Not Rated7 3/16"Buna-N
    6903N130000097513A10200000
    3/4"-10
    2 7/8"4 5/16" to 5 11/16"10°4 1/8"No19/32"3-A Certified 88-00, FDA Compliant 21 CFR 177.2600
    4,900Not Rated7 3/16"Buna-N
    6903N1700000097513A10200000
    3/4"-10
    4 1/8"5 1/2" to 8 1/16"10°3 1/8"No19/32"3-A Certified 88-00, FDA Compliant 21 CFR 177.2600
    3,300Not Rated9 9/16"Buna-N
    6903N140000097513A10200000
    3/4"-10
    4 1/8"5 1/2" to 8 1/16"10°4 1/8"No19/32"3-A Certified 88-00, FDA Compliant 21 CFR 177.2600
    4,900Not Rated9 9/16"Buna-N
    6903N1800000097513A10200000
    M16 × 2 mm2 7/8"4 1/8" to 5 1/2"10°2 9/16"No19/32"3-A Certified 88-00, FDA Compliant 21 CFR 177.2600
    2,000Not Rated7"Buna-N
    6903N3100000———0
    M20 × 2.5 mm2 7/8"4 5/16" to 5 11/16"10°3 1/8"No19/32"3-A Certified 88-00, FDA Compliant 21 CFR 177.2600
    3,300Not Rated7 3/16"Buna-N
    6903N32000000———0
     

    Seismic Stay-Put Swivel Leveling Mounts with Threaded Stud

    Subjected to rigorous stress tests, these mounts withstand movement in every direction to minimize damage during an earthquake. After leveling your machine, bolt the mount to the floor and tighten the locking nut onto the base for added stability. The ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install these mounts in either threaded holes or unthreaded through holes at the bottom of equipment.
    Three Mounting Holes
    Image of Product. Front orientation. Leveling Mounts. Seismic Stay-Put Swivel Leveling Mounts with Threaded Stud, Three Mounting Holes, With Cushion.

    With Cushion

    304 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.
    Rubber Cushion—A cushion under the base protects floors from scrapes and gouges.
    With Rubber Cushion
    Mounting Holes
    Cap. per
    Mount, lb.
    Thread Size
    Thread
    Lg.
    Fasteners
    Included
    Dia.
    Ctr.-to-Ctr.
    Lg.
    Swivel Range
    of Motion
    Base
    Dia.
    Specs.
    Met
    Load
    Pull
    Overall
    Ht.
    Cushion
    Material
    Each
    304 Stainless Steel Base and Stud
    M30 × 3.5 mm7 1/8"No17/32"4 3/32"10°5 7/8"NZS 421913,4806,29011 3/8"Buna-N
    7750N1110000000
    M36 × 4 mm7 1/8"No17/32"4 3/32"10°5 7/8"NZS 421921,5806,29011 3/8"Buna-N
    7750N112000000
    M42 × 4.5 mm7 5/16"No17/32"4 3/32"10°5 7/8"NZS 421931,4706,29011 3/4"Buna-N
    7750N113000000
    M48 × 5 mm9 1/8"No17/32"4 3/32"10°5 7/8"NZS 421931,4706,29013 1/2"Buna-N
    7750N114000000
     
    back to top