M1.7 Bolts | McMaster-Carr

Filter by

System of Measurement

Thread Size

Length

Fastener Head Type

Head Diameter

Drive Style

Head Height

Rounded Head Style

Threading

Material

Thread Spacing

Drive Size

Shoulder Diameter

Thread Pitch

Flat Head Profile

Socket Head Profile

Thread Direction

Hardness

Finish

Tip Type

DFARS Specialty Metals

REACH

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

Export Control Classification Number (ECCN)

EAR99

RoHS

Compliant

Tensile Strength

30,000 psi to 99,999 psi

Not Rated

Forward

How can we improve?

12 Products

JIS Steel Pan Head Screws

These screws are manufactured to meet Japanese Industrial Standards. Similar in appearance to Phillips, the JIS drive has a shallower opening with sharper angles and straighter internal walls. This lets them withstand more torque while preventing the driver from slipping and damaging the drive. Tighten them only with a JIS driver to avoid stripping the drive. Some JIS screws are marked with a dot near the drive for quick identification. Pan heads have a moderate height and width profile, offering a middle ground between narrower button heads and wider truss heads.

Length is measured from under the head.

Zinc-Plated Steel—A common choice for areas with occasional exposure to moisture.

		Head, mm
	Lg., mm	Dia.	Ht.	Threading	Tensile Strength	Specs. Met	Pkg. Qty.		Pkg.
Zinc-Plated Steel







				M1.7 × 0.35 mm

				2	2.5	0.5	Fully Threaded	Not Rated	JCIS 10-70	25	96773A635	00000


				3	2.5	0.5	Fully Threaded	Not Rated	JCIS 10-70	25	96773A636	0000
				4	2.5	0.5	Fully Threaded	Not Rated	JCIS 10-70	25	96773A637	0000
				5	2.5	0.5	Fully Threaded	Not Rated	JCIS 10-70	25	96773A638	0000
				6	2.5	0.5	Fully Threaded	Not Rated	JCIS 10-70	25	96773A639	0000

JIS Steel Flat Head Screws

Length is measured from the top of the head.

Zinc-Plated Steel—A common choice for areas with occasional exposure to moisture.

Standard Profile—Standard-profile heads are the most common choice for flat head screws.

				Head, mm
	Lg., mm	Countersink Angle	Flat Head Profile	Dia.	Ht.	Threading	Tensile Strength, psi	Specs. Met	Pkg. Qty.		Pkg.
Zinc-Plated Steel







				M1.7 × 0.35 mm

				2	90°	Standard	2.5	0.5	Fully Threaded	60,000	JCIS 10-70	25	91305A006	00000


				3	90°	Standard	2.5	0.5	Fully Threaded	60,000	JCIS 10-70	25	91305A007	0000
				4	90°	Standard	2.5	0.5	Fully Threaded	60,000	JCIS 10-70	25	91305A008	0000
				5	90°	Standard	2.5	0.5	Fully Threaded	60,000	JCIS 10-70	25	91305A009	0000
				6	90°	Standard	2.5	0.5	Fully Threaded	60,000	JCIS 10-70	25	91305A101	0000

Stainless Steel Hex-Drive Precision Shoulder Screws

Our go-to choice for assemblies that require smooth, accurate movement. These screws are engineered for tight tolerances, with shoulder diameters twice as precise as those on standard-fit screws. They're made of stainless steel, so they won't rust, though they're not as strong as their alloy steel counterparts.

18-8 Stainless Steel—The choice for wet and outdoor environments, these screws won't rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

				Head, mm				Certificate			Each
	Shoulder Lg., mm	Thread Size	Thread Lg., mm	Dia.	Ht.	Drive Size, mm	Tensile Strength, psi	Type	Form		1-4	5-Up
18-8 Stainless Steel







				2.5 mm Diameter Shoulder (-0.025 mm to 0 mm Tolerance)

				4	M1.7 × 0.35 mm	3	4	2	1.5	70,000	—	—	90278A719	00000	00000


				6	M1.7 × 0.35 mm	3	4	2	1.5	70,000	Material Certificate	Digital	90278A721	0000	0000