About Grease
More
About Lubricants
More
Penetrating Lubricants
Cut through dirt, grease, and rust, loosen stuck fasteners, and protect tools and equipment with these thin, multipurpose lubricants.Lubricants with silicone are clear, have excellent moisture resistance, and can be used on most rubber and plastic. Lubricants with boron nitride last long and cure to a semi-dry film that resists corrosion from salt water and won’t wash off.
DuPont® Silicone Lubricant repels moisture and is nonstaining.
Container | Each | Package | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Size, fl. oz. | Net Weight, oz. | Type | Additive | Temp. Range, °F | Each | Pkg. Qty. | Pkg. | ||
DuPont® Multi-Use High Performance Lubricant | |||||||||
| 4 | __ | Squeeze Bottle | Boron Nitride | -20° to 250° | 00000000 | 00000 | __ | 000000 | 00 |
DuPont® Silicone Lubricant | |||||||||
| __ | 14 | Aerosol Can | Boron Nitride, Silicone | -40° to 400° | 00000000 | 00000 | 6 | 0000000 | 000000 |
Penetrating Lubricants for Chain
For use with roller chain and other moving metal parts, these thin lubricants cut through dirt, grease, and rust, withstand heavy loads, and resist wear.
Lubricants with moly (molybdenum disulfide) withstand high loads and have excellent wear resistance.
Lubricants with boron nitride penetrate into roller chain links and pins while wet—below 120° F it acts as a dry lubricant that won’t attract dust or dirt; above 120° F it acts as a wet lubricant.
Container | ||||||
|---|---|---|---|---|---|---|
| Net Weight, oz. | Type | Additive | Minimum Temperature, °F | Maximum Temperature, °F | Each | |
DuPont® Chain-Saver Wax-Based Lubricant | ||||||
| 14 | Aerosol Can | Boron Nitride, Moly | -30° | 300° | 00000000 | 000000 |
Container | |||||||
|---|---|---|---|---|---|---|---|
| Net Weight, oz. | Type | Additive | Minimum Temperature, °F | Maximum Temperature, °F | Pkg. Qty. | Pkg. | |
DuPont® Chain-Saver Wax-Based Lubricant | |||||||
| 14 | Aerosol Can | Boron Nitride, Moly | -30° | 300° | 6 | 00000000 | 000000 |
Moisture-Resistant Grease
Formulated to adhere to metal parts and stay in place in wet environments, this grease is commonly used in pulp and paper manufacturing and water management facilities.
NLGI 2 is about the consistency of peanut butter.
Mineral-oil-based grease, derived from petroleum, is usually more economical than synthetic-oil-based grease.
Grease with lithium thickener offers good heat resistance. Grease with boron nitride cures to a semi-dry film that resists corrosion from salt water and won’t wash off.
Grease lubricates most efficiently within the listed temperature range. Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry.
Container | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| NLGI Viscosity Grade | Base Oil | Additive | Net Weight | Type | Temp. Range, °F | Melting Temp., °F | Color | Each | |
DuPont® Pro Grease White Lithium Premium—Lithium Thickener | |||||||||
| 2 | Mineral | Boron Nitride | 10 oz. | Aerosol Can | -10° to 350° | 500° | White | 00000000 | 000000 |
Container | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| NLGI Viscosity Grade | Base Oil | Additive | Net Weight | Type | Temp. Range, °F | Melting Temp., °F | Color | Pkg. Qty. | Pkg. | |
DuPont® Pro Grease White Lithium Premium—Lithium Thickener | ||||||||||
| 2 | Mineral | Boron Nitride | 10 oz. | Aerosol Can | -10° to 350° | 500° | White | 6 | 00000000 | 000000 |
Bearing Grease
This grease is wear resistant for use in a wide range of bearing types.
NLGI viscosity grade is a rating of a grease's consistency. NLGI 2 is about the consistency of peanut butter.
Grease with boron nitride thickener has excellent heat resistance and good moisture and oxidation resistance.
Grease lubricates most efficiently within the listed temperature range. Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry. Nonmelting grease can be used at temperatures above the maximum temperature briefly, but then will break down more quickly.
Chemours Krytox™ grease is long lasting with an indefinite shelf life. Krytox™ XHT grease can be used at extremely high temperatures.
Container | Each | |||||||
|---|---|---|---|---|---|---|---|---|
| NLGI Viscosity Grade | Base Oil | Size, fl. oz. | Type | Temp. Range, °F | Melting Temp., °F | Color | Each | |
Chemours Krytox™ XHT-BDX—Boron Nitride Thickener | ||||||||
| 2 | Synthetic | 2 | Tube | 5° to 660° | Not Rated | White | 00000000 | 0000000 |
| 2 | Synthetic | 8 | Tube | 5° to 660° | Nonmelting | White | 00000000 | 000000 |
| 2 | Synthetic | 14 | Grease Gun Cartridge | 5° to 660° | Nonmelting | White | 00000000 | 00000000 |
Dry-Film Lubricants
These lubricants go on wet for easy application. Once dry, they form a nonstick film that won't attract dust. Use them for general purpose lubricating in most applications.
Lubricants with boron nitride resist corrosion from salt water and won’t wash off. Lubricants with ceramic are often used in extreme-temperature applications, such as welding, metal processing, and glassmaking. Dilute 1-gallon pail with water before using.
Additives and Fillers for Paints, Coatings, and Lubricants
When mixed into coatings, resins, polymers, and metals, these fillers enhance strength, conductivity, lubricity, and other physical properties.
Container | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Material | Concentration | Net Weight | Type | Material | Form | Particle Size | CAS Number | Each | |
| Boron Nitride | 99.9% | 1.8 oz. | Jar | Plastic | Powder | 0.5 microns | 10043-11-5 | 0000000 | 0000000 |
Non-Bonding Heat Transfer Compounds
Also known as thermal paste, these boron-nitride compounds increase heat transfer between parts while preventing them from sticking. Unlike antiseize compounds, they don't conduct electricity, so you won't risk shorting out sensitive electronics. They're often used on thermocouple probes to improve accuracy. You can also use them in 3D printer heating blocks and other high-temperature areas to keep parts from fusing together.
Container | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Size, fl. oz. | Type | Chemical | Max. Temp. | Thermal Conductivity | Color | Includes | For Use On | Compatible With | Each | |
| 0.2 | Syringe | Boron Nitride | 1,562º F 850º C | 31.4 W/m-K @ 212° F | White | Three Applicator Brushes | 3D Printer Extruder Heating Elements, Electrical Components | Aluminum, Brass, Copper, Iron, Nickel, Stainless Steel, Steel, Titanium | 0000000 | 000000 |
| 1 | Syringe | Boron Nitride | 1,562º F 850º C | 31.4 W/m-K @ 212° F | White | __ | 3D Printer Extruder Heating Elements, Electrical Components | Aluminum, Brass, Copper, Iron, Nickel, Stainless Steel, Steel, Titanium | 0000000 | 00000 |