Access a range of hard-to-reach fasteners without needing to remove obstructions. These wrenches are particularly useful where components are packed tightly, such as HVAC systems and conveyors. The box end swivels a full 180° to pivot around obstacles and give you leverage even at awkward angles. To switch between loosening and tightening, flip these wrenches over.

Turn a variety of nuts and bolts without having to remove and reposition these wrenches. They're commonly used where you don't have enough space for full turns. Just flip them over when you need to switch between tightening and loosening.

Get a strong grip in tight areas, even on fasteners that are rounded or damaged. Open the spring-loaded jaws in these heads to access a fastener like an open-end wrench; the jaws will automatically close when you push against the fastener. The 6-point opening grips hex heads on all sides. Also known as crowfoot wrenches. Attach one to a socket extension to reach obstructed fasteners. With the ratcheting feature, you can turn the fastener without removing and repositioning the wrench head.

These versatile wrenches turn a range of hex, 12-point, and spline fasteners. With more points of contact than 12-point openings, the spline-shaped box end gets a better grip on nuts and bolts and is less likely to round off corners. Rotate these wrenches without having to remove and reposition them. They're commonly used where you don't have enough space for full turns. To switch between loosening and tightening, flip them over.

Attach one of the heads in these sets to a torque wrench for more leverage to loosen a stubborn fastener. Also known as torque adapters. You can easily calculate your desired torque setting with the precise 2” center-to-center length. The wrench heads can also be connected to an extension to reach fasteners when vertical clearance is limited. The box end grips all sides of the fastener to prevent slipping. For use with hand-drive tools only.

A ratchet mechanism allows you to turn fasteners in tight spaces without removing and repositioning the wrench. The smaller the turn required to ratchet, the less clearance you need to engage the ratchet. These wrenches are polished for a mirror-like finish.

Made of materials that are Factory Mutual approved, these tools inhibit sparking and are nonmagnetic and corrosion resistant. They satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Warning: Do not use these tools in direct contact with acetylene.

The ultimate tool for ratcheting in tight spaces—in an array of sizes. They’re up to 50% shorter than others to squeeze into spots without enough clearance to make full turns, such as engine compartments. With the flick of a lever, these wrenches go from loosening nuts and bolts to tightening them.

The heads are offset to provide clearance for reaching over obstructions. These wrenches have a ratchet mechanism that allows you to turn fasteners in tight spaces without removing and repositioning the tool. The smaller the turn required to ratchet, the less clearance you need to engage the ratchet. They are polished for a mirror-like finish.

Turn off the main supply of water or gas at the point it enters your facility.

These wrenches are polished for a mirror-like finish.

Turn nuts and bolts in tight spaces without removing and repositioning the wrenches in these sets. They’re up to 50% shorter than others to squeeze into spots without enough clearance to make full turns, such as engine compartments. When you need more leverage, opt for standard-length ratcheting wrenches.

The heads are offset 45° to provide clearance for reaching over obstructions.