Support the corners of strut channel structures.

Designed to wrap around the sides of strut channel, these brackets provide a stronger hold than other strut channel brackets.

Push these brackets into strut channel and tighten the included cam screws for a partially concealed connection.

Run cable and tubing in the tightest spaces with channel that is one-quarter the height and one-half the width of regular strut channel.

This welded, one-piece strut channel combines two strut channels side-to-side.

For compatibility with quick-connect clamps to secure pipe and conduit without screws and tools, this strut channel has narrow slotted holes.

A tab on the end of these shelf brackets fits inside the strut channel for extra stability.

Mount a length of strut channel between the ends of a beam to run cable and conduit along the beam without drilling.

Connect two channels to create a stacked channel.

A spring plus serrated grooves that grip the lip of the channel provide a more secure hold than standard strut channel nuts.

In addition to serrated grooves for gripping the lip of the channel, these nuts have wings for easy positioning.

Quickly attach these nuts by twisting them closed at any point along a threaded rod.

Also known as insert nuts, these convert slotted holes to threaded round holes and keep them centered in the channel.

A tab fits tightly against the lip of the channel to keep these nuts from slipping.

Use with hex nuts to connect threaded rod.

Keep hardware centered in the strut channel slot.

Brackets mount on the outside of strut channel to allow trolley movement.

Slip these hangers onto the lip of top-opening strut channel to attach chain, wire rope, pipe, and threaded rod.

Connect T‐slotted rails and reinforce joints for structural stability.

Pivots provide smooth motion at the junction between two T-slotted rails.

Attach sensors, tubes, and other components to T-slotted framing rails and structures.

Add panels to T-slotted framing to create machine guards, strip doors, and welding curtains.

Attach and position phones, tablets, monitors, and other displays on T-slotted rails.

Secure doors and windows made of T-slotted framing to protect valuables or restrict access for safety.

Slide drawers, panels, and doors with these tracks and rollers.

Fittings come in two pieces to wrap around rails, so you can quickly modify existing structures without disassembling. Use clamp-on framing and fittings to form temporary partitions, modular conveyors, and workstations.

To provide corrosion resistance in wet environments, this framing is galvanized.

Stronger than plastic and aluminum, this is the lightest weight framing we offer. It has good resistance to chemicals and salt water.

Create posts of varying lengths.

Also known as angle brackets.

A rubber seal protects against moisture around the installation hole.

Lock these brackets together with a pin or a bolt. They are often used on marine docks.

Machine holes and slots or weld in place.

Often used in washrooms, these brackets mount panels and partitions.

A built-in level makes it easy to align panels.

These brackets come in one piece that can be cut-to-size with a hacksaw.

Fit these brackets through drilled holes in panels.

To provide more mounting flexibility than other sensor and switch mounting brackets, the head rotates 360°.

The spring-loaded design absorbs impact to protect sensors and switches from damage.

Create custom brackets to support metal handrails on stairs, ramps, and railings by cutting, machining, and welding these components.

These shelf brackets have a 500-lb. capacity—twice the capacity of our other shelf brackets.

Hold shelves in cabinets and bookcases without standards.

A plastic-laminate finish protects these shelves from stains and scratches.

These shelves are durable and easy to clean.

These standards mount to a hanging bracket or track, making them easier to install than other standards.

These smooth, solid shelves are corrosion resistant and easy to clean.

Shelves are reversible, allowing you to use them as a flush surface or with a lip to prevent items from falling off.

Don't fumble with nuts, bolts, or shelf clips—shelves have rivets that tap into keyhole slots on the posts with a rubber mallet.

Only 14" wide, this shelving easily fits into tight spaces.

The shelves on these units pull out to access heavy dies, machinery, and tools. They slide on roller bearings so you can retrieve contents horizontally with a forklift and vertically with a hoist, crane, or monorail system.

This shelving quickly snaps together with no tools or hardware needed, yet is strong enough to handle your heavy parts and equipment.

Also known as bulk racks, these units offer more storage space per level for large items and boxes.

The sloped shelves on these shelving units allow parts to flow forward, providing access and visibility.

These one-piece units have an all-welded steel construction to support heavy tools and materials.

This shelving has three times the shelf capacity of our Heavy Duty Wide and Deep Wire Shelving.

Pop the posts into the holes and these shelves are ready to load—no tools required.

Often used in food service areas and laboratories, these shelving units have removable, dishwasher-safe panels that are treated to prevent degradation caused by the growth of stain- and odor-causing bacteria.

Create storage that fits your space with these stackable bin shelves.