Press Fit Brackets | McMaster-Carr

Filter by

System of Measurement

Thread Size

Leg Shape

Base Shape

For Leg Inner Width

For Beam Thickness

Base Width

Material

Beam Mount Location

Base Material

Base Diameter

For Leg OD

For Leg Outer Width

For EMT Conduit Trade Size

For Beam Shape

Height

For Leg ID

For Leg Inner Length

Pipe Size

Overall Height

For Suspending

Export Control Classification Number (ECCN)

EAR99

DFARS Specialty Metals

REACH

RoHS

124 Products

Easy-Position Beam Clamps for Pipe, Tube, and Conduit

Press Fit

Suspend material at any angle from the beam. Clamps have a fixed jaw that secures to the beam and a hanger that swivels 360° to position material and accommodate for misalignment.

Press Fit—Install press-fit clamps by lightly hammering them onto the beam.

			For OD			For Beam Thk.
	Mount Type	For Beam Shape	Inch	Metric, mm	For Pipe Size	Min.	Max.	Wt. Cap., lb.	Range of Motion	Throat Dp.	Surface to Pipe Center	Lg.	Wd.	Ht.		Each
Bottom and Top Beam Mount







				Zinc-Plated Steel

				Press Fit	Flat, Taper	3/4" to 1"	19 to 25	1/2	1/8"	1/4"	75	360°	1"	3/4"	1 3/8"	1 3/4"	3"	00000000	00000


				Press Fit	Flat, Taper	3/4" to 1"	19 to 25	1/2	5/16"	1/2"	75	360°	1"	3/4"	1 3/8"	1 3/4"	3 1/4"	0000000	0000
				Press Fit	Flat, Taper	3/4" to 1"	19 to 25	1/2	9/16"	3/4"	75	360°	1"	3/4"	1 1/2"	1 3/4"	3 1/2"	00000000	0000
				Press Fit	Flat, Taper	3/4" to 1"	19 to 25	1/2	13/16"	1 1/8"	75	360°	1"	3/4"	1 1/2"	1 3/4"	3 3/4"	00000000	0000
				Press Fit	Flat, Taper	1 3/16" to 1 5/16"	30 to 33	1	1/8"	1/4"	75	360°	1"	1"	1 3/8"	1 3/4"	3 1/2"	00000000	0000
				Press Fit	Flat, Taper	1 3/16" to 1 5/16"	30 to 33	1	5/16"	1/2"	75	360°	1"	1"	1 3/8"	1 3/4"	3 3/4"	0000000	0000
				Press Fit	Flat, Taper	1 3/16" to 1 5/16"	30 to 33	1	9/16"	3/4"	75	360°	1"	1"	1 1/2"	1 3/4"	4"	00000000	0000
				Press Fit	Flat, Taper	1 5/16" to 1 5/8"	33 to 41	1 1/4	1/8"	1/4"	75	360°	1"	1"	1 3/8"	1 3/4"	3 3/4"	00000000	0000
				Press Fit	Flat, Taper	1 5/16" to 1 5/8"	33 to 41	1 1/4	5/16"	1/2"	75	360°	1"	1"	1 3/8"	1 3/4"	4"	0000000	0000
				Press Fit	Flat, Taper	1 3/4" to 1 7/8"	44 to 48	1 1/2	5/16"	1/2"	75	360°	1"	1 1/4"	1 3/8"	1 3/4"	4 1/4"	0000000	0000
				Press Fit	Flat, Taper	1 7/8" to 2 3/8"	48 to 60	2	5/16"	1/2"	75	360°	1"	1 1/2"	1 3/8"	1 3/4"	5"	0000000	0000


				Press Fit	Flat, Taper	1 7/8" to 2 3/8"	48 to 60	2	9/16"	3/4"	75	360°	1"	1 1/2"	1 1/2"	1 3/4"	5 1/4"	00000000	0000

Beam Clamps with Tie Wire Hangers

Attach these light duty hangers to beams and other structural elements. They include a stiff wire for supporting ceilings, lighting fixtures, and other lightweight material. Hammer the clamp onto a beam to install.

		For Beam Thk.				Tie Wire
	For Beam Shape	Min.	Max.	Wt. Cap.	Mount Type	Lg., ft.	Gauge		Each
Bottom and Top Beam Mount







				Steel

				Flat	1/8"	1/4"	Not Rated	Press Fit	6	12	0000000	00000


				Flat	5/16"	1/2"	Not Rated	Press Fit	6	12	0000000	0000

Press-Fit Leveling Mount Inserts

Slip these inserts into tubular legs to quickly add threads for attaching leveling mounts. They’re often used in the legs of light equipment and furniture.

For Square Legs

Square inserts have flexible spring steel walls that grip the inside of the legs.

	For Leg						Thread
	Outer Lg.	Outer Wd.	Inner Lg.	Inner Wd.	Cap. per Mount	Overall Ht.	Size	Type	Dp.	Pkg. Qty.		Pkg.
Zinc-Plated Steel



		1"	1"	15/16"	15/16"	Not Rated	1 1/16"	1/4"-20	UNC	1/4"	4	0000000	00000


		1"	1"	15/16"	15/16"	Not Rated	1 1/16"	5/16"-18	UNC	1/4"	4	0000000	0000
		1"	1"	15/16"	15/16"	Not Rated	1 1/16"	3/8"-16	UNC	1/4"	4	0000000	00000
		1 1/4"	1 1/4"	1 3/16"	1 3/16"	Not Rated	1 1/16"	1/4"-20	UNC	1/4"	4	0000000	00000
		1 1/4"	1 1/4"	1 3/16"	1 3/16"	Not Rated	1 1/16"	5/16"-18	UNC	1/4"	4	0000000	00000
		1 1/4"	1 1/4"	1 3/16"	1 3/16"	Not Rated	1 1/16"	3/8"-16	UNC	1/4"	4	0000000	00000
		1 1/2"	1 1/2"	1 7/16"	1 7/16"	Not Rated	1 1/16"	3/8"-16	UNC	1/4"	4	0000000	00000
		1 1/2"	1 1/2"	1 7/16"	1 7/16"	Not Rated	2 1/8"	1/2"-13	UNC	1/2"	1	0000000	0000
		1 3/4"	1 3/4"	1 11/16"	1 11/16"	Not Rated	2 1/16"	1/2"-13	UNC	1/2"	1	0000000	00000
		2"	2"	1 15/16"	1 15/16"	Not Rated	2 1/16"	1/2"-13	UNC	1/2"	1	0000000	00000

For Round Legs

Image of Attribute. Front orientation. Contains Annotated.

Retaining clips hold the round inserts inside the legs.

	For Leg				Thread
	ID	OD	Cap. per Mount	Overall Ht.	Size	Type	Dp.	Pkg. Qty.		Pkg.
Zinc-Plated Steel



		11/16"	3/4"	Not Rated	5/8"	1/4"-20	UNC	3/8"	4	0000000	00000


		11/16"	3/4"	Not Rated	5/8"	5/16"-18	UNC	3/8"	4	0000000	00000
		15/16"	1"	Not Rated	9/16"	3/8"-16	UNC	3/8"	4	0000000	00000
		15/16"	1"	Not Rated	5/8"	1/4"-20	UNC	3/8"	4	0000000	00000
		15/16"	1"	Not Rated	5/8"	5/16"-18	UNC	3/8"	4	0000000	00000
		1 3/16"	1 1/4"	Not Rated	5/8"	1/4"-20	UNC	3/8"	4	0000000	00000
		1 3/16"	1 1/4"	Not Rated	5/8"	5/16"-18	UNC	3/8"	4	0000000	00000
		1 3/16"	1 1/4"	Not Rated	5/8"	3/8"-16	UNC	3/8"	4	0000000	00000
		1 7/16"	1 1/2"	Not Rated	5/8"	1/4"-20	UNC	3/8"	4	0000000	00000
		1 7/16"	1 1/2"	Not Rated	5/8"	5/16"-18	UNC	3/8"	4	0000000	00000
		1 7/16"	1 1/2"	Not Rated	5/8"	3/8"-16	UNC	3/8"	4	0000000	00000


		1 15/16"	2"	Not Rated	3/8"	3/8"-16	UNC	3/8"	4	0000000	00000
		1 15/16"	2"	Not Rated	5/8"	1/4"-20	UNC	3/8"	4	0000000	00000
		2 7/16"	2 1/2"	Not Rated	5/8"	3/8"-16	UNC	3/8"	4	0000000	00000

Routing Rings

Press Fit

Also known as bridle rings, routing rings have an open-eye design that allows you to quickly install wire and cable.

Press Fit—Press fit routing rings mount onto beams and other flat surfaces. A hole on the back of the jaw allows you to orient the ring horizontally. Lightly hammer to install.

	Eye Dia.					Overall
	Inch	Metric, mm	For Beam Thk.	Material	Wt. Cap., lb.	Lg.	Wd.	Ht.	Pkg. Qty.		Pkg.
Press Fit



		2"	51	1/8" to 1/4"	Galvanized Steel	15	2 7/16"	1 5/16"	3 1/2"	1	0000000	00000


		2"	51	5/16" to 1/2"	Galvanized Steel	15	2 7/16"	1 5/16"	3 1/2"	1	0000000	0000
		2"	51	9/16" to 3/4"	Galvanized Steel	15	2 7/16"	1 7/16"	3 1/2"	1	0000000	00000

Press-Fit Beam Clamps for Threaded Rods

A toothed clip secures these clamps to the beam—no fasteners required. Lightly tap with a hammer to install.

			For Beam Thk.
	For Beam Shape	For Thread Size	Min.	Max.	Wt. Cap., lb.	Mount Type	Lg.	Wd.	Ht.	Threaded Rod Included		Each
Bottom and Top Beam Mount







				Steel

				Flat, Taper	1/4"-20	1/8"	1/4"	150	Press Fit	7/8"	1 3/8"	1 7/8"	No	00000000	00000


				Flat, Taper	1/4"-20	5/16"	1/2"	150	Press Fit	7/8"	1 3/8"	2 1/4"	No	00000000	0000
				Flat, Taper	1/4"-20	9/16"	3/4"	150	Press Fit	7/8"	1 3/8"	2 3/8"	No	00000000	0000
				Flat, Taper	3/8"-16	1/8"	1/4"	150	Press Fit	7/8"	1 3/8"	1 7/8"	No	00000000	0000
				Flat, Taper	3/8"-16	5/16"	1/2"	150	Press Fit	7/8"	1 3/8"	2 1/4"	No	00000000	0000
				Flat, Taper	3/8"-16	9/16"	3/4"	150	Press Fit	7/8"	1 3/8"	2 3/8"	No	00000000	0000

High-Capacity Press-Fit Leveling Mount Inserts

Rated for high load capacity, use these inserts to connect threaded leveling mounts to machinery, instrument bases, and conveyor equipment with tubular legs. These inserts have pass-through holes that are partially threaded at the base. Tap mounts into place with a rubber hammer.

For Square Legs

Shown with

Brass

Insert

Installed

Plastic—The economical choice. These inserts can handle more weight than inserts with brass threads, but may wear out more quickly if frequently adjusted.

Plastic with Brass Insert—Move equipment around your workspace and make frequent adjustments without worrying about stripping the brass threads.

	For Leg						Thread
	Outer Lg.	Outer Wd.	Inner Lg.	Inner Wd.	Cap. per Mount, lb.	Overall Ht.	, mm	Size	Type	Dp.	Temp., ° F		Each
Plastic



		1 1/2"	1 1/2"	1 1/4"	1 1/4"	3,500	1 3/4"	—	3/8"-16	UNC	1 1/4"	-20 to 170	0000000	00000


		1 1/2"	1 1/2"	1 1/4"	1 1/4"	3,500	1 3/4"	—	1/2"-13	UNC	1 1/4"	-20 to 170	0000000	0000
		1 1/2"	1 1/2"	1 1/4"	1 1/4"	3,500	1 3/4"	—	5/8"-11	UNC	1 1/4"	-20 to 170	0000000	0000
		1 1/2"	1 1/2"	1 1/4"	1 1/4"	3,500	1 3/4"	—	3/4"-10	UNC	1 1/4"	-20 to 170	0000000	0000
		1 1/2"	1 1/2"	1 3/8"	1 3/8"	3,500	1 3/4"	—	3/8"-16	UNC	1 1/4"	-20 to 170	0000000	0000
		1 1/2"	1 1/2"	1 3/8"	1 3/8"	3,500	1 3/4"	—	1/2"-13	UNC	1 1/4"	-20 to 170	0000000	0000
		1 1/2"	1 1/2"	1 3/8"	1 3/8"	3,500	1 3/4"	—	5/8"-11	UNC	1 1/4"	-20 to 170	0000000	0000
		1 1/2"	1 1/2"	1 3/8"	1 3/8"	3,500	1 3/4"	—	3/4"-10	UNC	1 1/4"	-20 to 170	0000000	0000
		2"	2"	1 3/4"	1 3/4"	3,500	2"	—	3/8"-16	UNC	1"	-20 to 170	0000000	0000
		2"	2"	1 3/4"	1 3/4"	3,500	2"	—	1/2"-13	UNC	1"	-20 to 170	0000000	0000
		2"	2"	1 3/4"	1 3/4"	3,500	2"	—	5/8"-11	UNC	1"	-20 to 170	0000000	0000


		2"	2"	1 3/4"	1 3/4"	3,500	2"	—	3/4"-10	UNC	1"	-20 to 170	0000000	0000
		2"	2"	1 7/8"	1 7/8"	3,500	2"	—	3/8"-16	UNC	1"	-20 to 170	0000000	0000
		2"	2"	1 7/8"	1 7/8"	3,500	2"	—	1/2"-13	UNC	1"	-20 to 170	0000000	0000
		2"	2"	1 7/8"	1 7/8"	3,500	2"	—	5/8"-11	UNC	1"	-20 to 170	0000000	0000
		2"	2"	1 7/8"	1 7/8"	3,500	2"	—	3/4"-10	UNC	1"	-20 to 170	0000000	0000


		Plastic with Brass Insert



				1"	1"	7/8"	7/8"	1,100	1 3/16"	—	3/8"-16	UNC	7/8"	30 to 195	00000000	0000


				1"	1"	7/8"	7/8"	1,100	1 3/16"	—	1/2"-13	UNC	7/8"	30 to 195	00000000	0000
				1 3/16"	1 3/16"	1 1/16"	1 1/16"	1,200	1 5/16"	—	3/8"-16	UNC	7/8"	30 to 195	00000000	00000
				1 1/2"	1 1/2"	1 1/4"	1 1/4"	1,000	1 11/16"	—	3/8"-16	UNC	3/4"	30 to 195	00000000	00000
				1 1/2"	1 1/2"	1 1/4"	1 1/4"	1,000	1 11/16"	—	1/2"-13	UNC	3/4"	30 to 195	00000000	00000
				1 1/2"	1 1/2"	1 1/4"	1 1/4"	1,000	1 11/16"	—	5/8"-11	UNC	15/16"	30 to 195	00000000	00000
				1 1/2"	1 1/2"	1 1/4"	1 1/4"	1,000	1 11/16"	—	3/4"-10	UNC	1 1/8"	30 to 195	00000000	00000
				1 1/2"	1 1/2"	1 1/4"	1 1/4"	1,500	1 3/4"	—	3/8"-12	Acme	1 1/4"	-20 to 180	00000000	0000
				1 1/2"	1 1/2"	1 1/4"	1 1/4"	1,500	1 3/4"	—	1/2"-10	Acme	1 1/4"	-20 to 180	00000000	0000
				1 1/2"	1 1/2"	1 5/16"	1 5/16"	1,500	1 11/16"	1.5	M10	Metric	1"	-20 to 180	00000000	0000
				1 1/2"	1 1/2"	1 5/16"	1 5/16"	1,500	1 11/16"	1.75	M12	Metric	1"	-20 to 180	00000000	0000


				1 1/2"	1 1/2"	1 5/16"	1 5/16"	1,500	1 11/16"	2	M16	Metric	1"	-20 to 180	00000000	0000
				1 1/2"	1 1/2"	1 5/16"	1 5/16"	1,500	1 11/16"	2.5	M20	Metric	1"	-20 to 180	00000000	0000
				1 1/2"	1 1/2"	1 3/8"	1 3/8"	1,000	1 11/16"	—	3/8"-16	UNC	3/4"	30 to 195	00000000	00000
				1 1/2"	1 1/2"	1 3/8"	1 3/8"	1,000	1 11/16"	—	1/2"-13	UNC	3/4"	30 to 195	00000000	00000
				1 1/2"	1 1/2"	1 3/8"	1 3/8"	1,000	1 11/16"	—	5/8"-11	UNC	15/16"	30 to 195	00000000	00000
				1 1/2"	1 1/2"	1 3/8"	1 3/8"	1,000	1 11/16"	—	3/4"-10	UNC	1 1/8"	30 to 195	00000000	00000
				2"	2"	1 3/4"	1 3/4"	1,000	1 15/16"	—	3/8"-16	UNC	3/4"	30 to 195	00000000	00000
				2"	2"	1 3/4"	1 3/4"	1,000	1 15/16"	—	1/2"-13	UNC	3/4"	30 to 195	00000000	00000
				2"	2"	1 3/4"	1 3/4"	1,000	1 15/16"	—	5/8"-11	UNC	15/16"	30 to 195	00000000	00000
				2"	2"	1 3/4"	1 3/4"	1,760	1 15/16"	—	3/4"-10	UNC	1 1/8"	30 to 195	00000000	00000


				2"	2"	1 3/4"	1 3/4"	2,000	2"	—	3/8"-12	Acme	1"	-20 to 180	00000000	0000
				2"	2"	1 3/4"	1 3/4"	2,000	2"	—	1/2"-10	Acme	1"	-20 to 180	00000000	0000
				2"	2"	1 3/4"	1 3/4"	2,000	2"	1.5	M10	Metric	1"	-20 to 180	00000000	0000
				2"	2"	1 3/4"	1 3/4"	2,000	2"	1.75	M12	Metric	1"	-20 to 180	00000000	0000
				2"	2"	1 3/4"	1 3/4"	2,000	2"	2	M16	Metric	1"	-20 to 180	00000000	0000
				2"	2"	1 3/4"	1 3/4"	2,000	2"	2.5	M20	Metric	1"	-20 to 180	00000000	0000
				2"	2"	1 7/8"	1 7/8"	1,000	1 15/16"	—	3/8"-16	UNC	3/4"	30 to 195	00000000	00000
				2"	2"	1 7/8"	1 7/8"	1,000	1 15/16"	—	1/2"-13	UNC	3/4"	30 to 195	00000000	00000
2"				2"	1 7/8"	1 7/8"	1,000	1 15/16"	—	5/8"-11	UNC	15/16"	30 to 195	00000000	00000
2"	2"			1 7/8"	1 7/8"	1,760	1 15/16"	—	3/4"-10	UNC	1 1/8"	30 to 195	00000000	00000

For Rectangular Legs


Shown with Brass Insert Installed

Plastic with Brass Insert—Move equipment around your workspace and make frequent adjustments without worrying about stripping the brass threads.

	For Leg						Thread
	Outer Lg.	Outer Wd.	Inner Lg.	Inner Wd.	Cap. per Mount, lb.	Overall Ht.	Size	Type	Dp.	Temp., ° F		Each
Plastic with Brass Insert



		3"	2"	2 3/4"	1 3/4"	1,760	1 15/16"	5/8"-11	UNC	15/16"	30 to 195	00000000	000000


		3"	2"	2 3/4"	1 3/4"	1,760	1 15/16"	3/4"-10	UNC	1 1/8"	30 to 195	00000000	00000

For Round Legs


Shown with Brass Insert Installed

Plastic with Brass Insert—Move equipment around your workspace and make frequent adjustments without worrying about stripping the brass threads.

	For Leg				Thread
	ID	OD	Cap. per Mount, lb.	Overall Ht.	, mm	Size	Type	Dp.	Temp., ° F		Each
Plastic with Brass Insert



		1 5/16"	1 1/2"	1,500	1 11/16"	1.5	M10	Metric	1"	-20 to 180	00000000	00000


		1 5/16"	1 1/2"	1,500	1 11/16"	1.75	M12	Metric	1"	-20 to 180	00000000	0000
		1 5/16"	1 1/2"	1,500	1 11/16"	2	M16	Metric	1"	-20 to 180	00000000	0000
		1 3/8"	1 1/2"	1,000	1 11/16"	—	3/8"-16	UNC	3/4"	30 to 195	00000000	00000
		1 3/8"	1 1/2"	1,000	1 11/16"	—	1/2"-13	UNC	3/4"	30 to 195	00000000	00000
		1 3/8"	1 1/2"	1,000	1 11/16"	—	5/8"-11	UNC	15/16"	30 to 195	00000000	00000
		1 3/8"	1 1/2"	1,000	1 11/16"	—	3/4"-10	UNC	1 1/8"	30 to 195	00000000	00000
		1 9/16"	1 11/16"	1,000	1 11/16"	—	3/8"-16	UNC	7/8"	30 to 195	00000000	00000
		1 9/16"	1 11/16"	1,000	1 11/16"	—	1/2"-13	UNC	7/8"	30 to 195	00000000	00000
		1 9/16"	1 11/16"	1,000	1 11/16"	—	5/8"-11	UNC	7/8"	30 to 195	00000000	00000
		1 11/16"	1 15/16"	1,000	1 15/16"	—	3/8"-16	UNC	3/4"	30 to 195	00000000	00000


		1 11/16"	1 15/16"	1,000	1 15/16"	—	1/2"-13	UNC	3/4"	30 to 195	00000000	00000
		1 11/16"	1 15/16"	1,000	1 15/16"	—	5/8"-11	UNC	15/16"	30 to 195	00000000	00000
		1 11/16"	1 15/16"	1,760	1 15/16"	—	3/4"-10	UNC	1 1/8"	30 to 195	00000000	00000
		1 11/16"	2"	2,000	1 15/16"	—	3/8"-16	UNC	1"	30 to 195	000000000	0000
		1 11/16"	2"	2,000	1 15/16"	—	1/2"-13	UNC	1"	30 to 195	000000000	0000
		1 13/16"	2"	2,000	1 15/16"	1.5	M10	Metric	1"	-20 to 180	00000000	0000
		1 13/16"	2"	2,000	1 15/16"	1.75	M12	Metric	1"	-20 to 180	00000000	0000
		1 13/16"	2"	2,000	1 15/16"	2	M16	Metric	1"	-20 to 180	00000000	0000
		1 13/16"	2"	2,000	1 15/16"	2.5	M20	Metric	1"	-20 to 180	00000000	0000
		1 7/8"	2"	2,000	1 15/16"	—	3/8"-16	UNC	1"	30 to 195	000000000	0000


		1 7/8"	2"	2,000	1 15/16"	—	1/2"-13	UNC	1"	30 to 195	000000000	0000
		1 7/8"	2"	2,000	1 15/16"	—	5/8"-11	UNC	1"	30 to 195	000000000	0000
		1 15/16"	2"	1,000	1 15/16"	—	3/8"-16	UNC	3/4"	30 to 195	00000000	00000
		1 15/16"	2"	1,000	1 15/16"	—	1/2"-13	UNC	3/4"	30 to 195	00000000	00000
		1 15/16"	2"	1,000	1 15/16"	—	5/8"-11	UNC	15/16"	30 to 195	00000000	00000
		1 15/16"	2"	1,760	1 15/16"	—	3/4"-10	UNC	1 1/8"	30 to 195	00000000	00000
		2 1/4"	2 3/8"	1,700	1 15/16"	—	5/8"-11	UNC	1 1/2"	30 to 195	00000000	00000