Barbed Connection Type Barbed Connection Type |
|---|
 | Clamp On |
 | Push On |
 | Gripping Tabs |
For Use With For Use With |
|---|
|
Maximum Pressure Maximum Pressure |
|---|
|
Washer Material Washer Material |
|---|
|
Length Length |
|---|
|
|
|
Specifications Met Specifications Met |
|---|
|
How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Metal Garden Hose Fittings
Connect these fittings to rubber or plastic garden hose for a variety of water supply applications.
Brass fittings have good corrosion resistance and are softer than other metal fittings, so they’re easier to thread together.
Fittings that swivel until tightened rotate 360° for easy installation.
Fittings with a barbed end are also known as hose menders and splicers. Use them to connect lengths of hose or to repair damaged hose. Fittings with a clamp-on barbed end slide into hose and secure with a clamp. Fittings with gripping tabs provide a quick way to attach fittings to hose with no clamps or screws required; insert the barb and crimp the tabs to the hose with pliers. They are also known as clincher hose fittings.
- Attachment Type: Use Worm-Drive Clamps
- Attachment Type: Use Worm-Drive Clamps
- Attachment Type: Use Worm-Drive Clamps
Metal Garden Hose Fittings for Drinking Water
These fittings meet NSF/ANSI Standard 61 for drinking water. Connect them to rubber or plastic garden hose for a variety of water supply applications. Fittings are brass for good corrosion resistance.
Fittings that swivel until tightened rotate 360° for easy installation.
Fittings with a barbed end are also known as hose menders and splicers. Use them to connect lengths of hose or to repair damaged hose. To connect, slide the barbed end into rubber or plastic hose and secure with a clamp.
For technical drawings and 3-D models, click on a part number.
- Maximum Pressure: 150 psi @ 72° F
- Attachment Type: Use Worm-Drive Clamps
- Specifications Met: NSF/ANSI 61
- Maximum Pressure: 150 psi @ 72° F
- Attachment Type: Use Worm-Drive Clamps
- Specifications Met: NSF/ANSI 61
- Maximum Pressure: 150 psi @ 72 ° F
- Attachment Type: Use Worm-Drive Clamps
- Specifications Met: NSF/ANSI 61
Threaded Garden Hose Couplings
Use these two-piece couplings to create an access point within a garden hose line. The threaded design allows for a more secure hold at the point of connection than quick-disconnect and cam-and-groove garden hose couplings. Couplings are brass for good corrosion resistance.
Couplings with barbed ends slide into plastic or rubber hose and secure with a clamp. Also known as hose menders and splicers, they can repair two lengths of damaged hose at once.
- Attachment Type: Use Worm-Drive Clamps
Male Adapter | Female Adapter | |||||||
|---|---|---|---|---|---|---|---|---|
| Connection Style | For Hose ID | Garden Hose Trade Size | Connection Style | For Hose ID | Garden Hose Trade Size | Thread Type | Each | |
Brass | ||||||||
| Barbed Male × Threaded Male | 1/2" | 3/4 | Barbed Male × Threaded Female | 1/2" | 3/4 | GHT | 0000000 | 00000 |
| Barbed Male × Threaded Male | 5/8" | 3/4 | Barbed Male × Threaded Female | 5/8" | 3/4 | GHT | 0000000 | 0000 |
| Barbed Male × Threaded Male | 3/4" | 3/4 | Barbed Male × Threaded Female | 3/4" | 3/4 | GHT | 0000000 | 0000 |
Metal Push-On Barbed Hose Fittings for Air and Water
Fittings have sharper barbs than standard barbed hose fittings to grip reinforced rubber push-on hose with no clamps or ferrules required. The more you pull on the fittings, the tighter the hose will grip.
Brass fittings are softer than other metal fittings, so they’re easier to thread together. They have good corrosion resistance. Fittings with a threaded end are also known as hose nipples.
The optional installation tool (sold separately) allows you to connect large quantities of barbed fittings to push-on hose. Use the built-in cutter to squarely cut the hose without fraying. Then, clamp the hose into the tool’s vise and apply light pressure on the handle to drive into the fitting. Replace a damaged ring with a ring stop (sold separately).
Note: To ensure proper connection, the barbed end has to be pushed in all the way, with the hose end concealed by the ring.
- Maximum Pressure: 150 psi @ 72° F
- Temperature Range: -20° to 150° F
- Specifications Met: SAE J476, SAE J512, SAE J514
- Maximum Pressure: 150 psi @ 72° F
- Temperature Range: -20° to 150° F
- Specifications Met: SAE J476, SAE J512, SAE J514
Mounting Hole | ||||||||
|---|---|---|---|---|---|---|---|---|
| For Hose ID Range | Lg. | Ht. | Dp. | Dia. | No. of | Mounting Fasteners Included | Each | |
| 1/4" to 3/4" | 13 1/2" | 7" | 2 3/8" | 7/16" | 4 | No | 00000000 | 0000000 |