Brass binding barrels and screws are corrosion resistant in wet environments, electrically conductive, and nonmagnetic. Use them to anchor door closers, kickplates, and other architectural hardware. The barrel head is smooth with no drive to be tampered with on the outside of your door, and the screw has a flat head that sits flush with the surface for a finished look. The screw protrudes from the barrel to leave room for hardware. Install in a hole with a diameter equal to the barrel diameter. Barrel length and screw length are measured from under the head.

For technical drawings and 3-D models, click on a part number.

These brass binding barrels and screws are corrosion resistant in wet environments, electrically conductive, and nonmagnetic. A thin head provides a nearly flush finish with the material surface. Barrel length and screw length are measured from under the head.

Open-end barrels are tapped through the head to provide more thread engagement when fastening thin materials.

For technical drawings and 3-D models, click on a part number.