Material Material |
|---|
|
Shape Shape |
|---|
 | Sheet and Bar |
 | Rod and Disc |
Thickness Thickness |
|---|
|
|
|
Tolerance Rating Tolerance Rating |
|---|
|
Yield Strength Yield Strength |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Density Density |
|---|
|
Certificate Certificate |
|---|
 | |
Appearance Appearance |
|---|
 | Plain |
Fabrication Fabrication |
|---|
|
About Plastic
More
About Copper, Brass, and Bronze
More
Easy-to-Machine Architectural 385 Brass Rods
- Yield Strength:
Inch sizes: 16,000 psi
Metric sizes: 60,000 psi - Hardness:
Inch sizes: Rockwell B40 (Soft)
Metric sizes: Rockwell B55 (Soft) - Temper:
Inch sizes: H02 (1/2 Hard)
Metric sizes: 1/2 Hard - Heat Treatable: No
- Specifications Met:
Inch sizes: ASTM B455
Metric Sizes: European Standard EN 12164
Often called architectural bronze, 385 brass is easy to machine and has excellent formability when heated. It is typically used for handrails, ornamental trim, and hardware, such as hinges and lock bodies.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
1 m Lg. | ||||
|---|---|---|---|---|
| Dia., mm | Dia. Tolerance Range, mm | Straightness Tolerance | Each | |
| 2 | -0.05 | .4 mm per 400 mm | 0000000 | 00000 |
| 3 | -0.05 | .4 mm per 400 mm | 0000000 | 0000 |
| 4 | -0.05 | .4 mm per 400 mm | 0000000 | 00000 |
| 5 | -0.05 | .4 mm per 400 mm | 0000000 | 00000 |
| 6 | -0.05 | .4 mm per 400 mm | 0000000 | 00000 |
| 8 | -0.08 | .4 mm per 400 mm | 0000000 | 00000 |
| 10 | -0.08 | .4 mm per 400 mm | 0000000 | 00000 |
| 20 | -0.08 | .4 mm per 400 mm | 0000000 | 000000 |
Easy-to-Machine Architectural 385 Brass Bars
- Yield Strength: 16,000 psi
- Hardness: Rockwell B40 (Soft)
- Temper: See table
- Heat Treatable: No
- Specifications Met: ASTM B455
Often called architectural bronze, 385 brass is easy to machine and has excellent formability when heated. It is typically used for handrails, ornamental trim, and hardware, such as hinges and lock bodies.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
Oversized Weldable 954 Bearing Bronze Bars
- Yield Strength: 29,000 psi
- Hardness: Rockwell B85 (Medium)
- Temper: M07
- Heat Treatable: Yes
- Specifications Met: ASTM B505
Thickness and width are oversized to allow for finishing. 954 bronze contains a minimum of 10% aluminum for strength and weldability. It is also known as aluminum bronze. It's widely used for bearings, bushings, valve bodies, and worm gears.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
| Wd. | Straightness Tolerance | 1/2 ft. Lg. | 1 ft. Lg. | 2 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
1/4" Thick. (0.067" to 0.142" Tolerance) | |||||||
|---|---|---|---|---|---|---|---|
| 6" | 0.007" per inch | 00000000 | |||||
1/2" Thick. (0.067" to 0.142" Tolerance) | |||||||
| 1/2" | 0.007" per inch | 00000000 | |||||
| 6" | 0.007" per inch | 00000000 | |||||
3/4" Thick. (0.067" to 0.142" Tolerance) | |||||||
| 3/4" | 0.007" per inch | 00000000 | |||||
1" Thick. (0.067" to 0.142" Tolerance) | |||||||
| 1" | 0.007" per inch | 00000000 | |||||
| 6" | 0.007" per inch | 00000000 | |||||
1 1/4" Thick. (0.067" to 0.142" Tolerance) | |||||||
| 1 1/4" | 0.007" per inch | 00000000 | |||||
1 1/2" Thick. (0.067" to 0.142" Tolerance) | |||||||
| 1 1/2" | 0.007" per inch | 00000000 | |||||
| 6" | 0.007" per inch | 00000000 | |||||
2" Thick. (0.067" to 0.142" Tolerance) | |||||||
| 2" | 0.007" per inch | 00000000 | |||||
| 6" | 0.007" per inch | 00000000 | |||||
3" Thick. (0.067" to 0.142" Tolerance) | |||||||
| 3" | 0.007" per inch | 00000000 | |||||
4" Thick. (0.067" to 0.142" Tolerance) | |||||||
| 4" | 0.007" per inch | 00000000 | |||||
Ultra-Strength Easy-to-Form 510 Bronze Sheets
- Yield Strength: 80,000 psi
- Hardness: Rockwell B90 (Medium)
- Temper: H08 (Spring)
- Heat Treatable: No
- Specifications Met: ASTM B103
Because 510 bronze is very strong and formable, it is the best choice for applications involving repetitive motion, such as springs, bellows, and switches.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
| Thick. | Thick. Tolerance | 1/2" × 96" | 1" × 96" | 2" × 12" | 2" × 48" | 6" × 12" | 6" × 48" | 6" × 96" | 12" × 12" | 12" × 48" | 12" × 96" | |
| 0.005" | -0.001" to 0.001" | 00000000 | ||||||||||
| 0.008" | -0.001" to 0.001" | 00000000 | ||||||||||
| 0.01" | -0.002" to 0.002" | 00000000 | ||||||||||
| 0.013" | -0.002" to 0.002" | 00000000 | ||||||||||
| 0.016" | -0.003" to 0.003" | 00000000 | ||||||||||
| 0.02" | -0.004" to 0.004" | 00000000 | ||||||||||
| 0.025" | -0.004" to 0.004" | 00000000 | ||||||||||
| 0.032" | -0.004" to 0.004" | 00000000 | ||||||||||
| 0.04" | -0.004" to 0.004" | 00000000 | ||||||||||
| 0.05" | -0.006" to 0.006" | 00000000 | ||||||||||
| 0.064" | -0.006" to 0.006" | 00000000 | ||||||||||
| 0.09" | -0.007" to 0.007" | 00000000 | ||||||||||
| 1/8" | -0.007" to 0.007" | 00000000 |
Easy-to-Form 220 Bronze
- Yield Strength: 33,000 psi
- Hardness: Rockwell B55 (Soft)
- Temper:
0.187" thick. sheets: H01 (1/4 Hard)
All other sizes: H02 (1/2 Hard) - Heat Treatable: No
- Specifications Met: ASTM B36
Offering excellent formability, 220 bronze is known for its ability to withstand outdoor exposure. Commonly called commercial bronze, it's uses include weatherstripping, trim, and decorative hardware.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
| Thick. | Thick. Tolerance | 2" × 24" | 4" × 24" | 6" × 6" | 6" × 12" | 6" × 24" | 12" × 12" | 12" × 24" | 12" × 48" | 24" × 24" | 24" × 48" | |
| 0.02" | -0.002" to 0.002" | 000000000 | ||||||||||
| 0.032" | -0.002" to 0.002" | 000000000 | ||||||||||
| 0.04" | -0.002" to 0.002" | 000000000 | ||||||||||
| 0.05" | -0.002" to 0.002" | 000000000 | ||||||||||
| 0.064" | -0.008" to 0.008" | 000000000 | ||||||||||
| 0.08" | -0.008" to 0.008" | 000000000 | ||||||||||
| 0.09" | -0.008" to 0.008" | 000000000 | ||||||||||
| 0.125" | -0.008" to 0.008" | 000000000 |
Clear Scratch- and UV-Resistant Cast Acrylic Sheets, Bars, and Cubes
These cast acrylic sheets, bars, and cubes are often fabricated into tanks, see-through barrier panels, and light fixture lenses. Cast acrylic, which is comparable to Lucite and Plexiglas® Acrylic, is easier to machine than extruded acrylic. This material is scratch and UV resistant; it stands up to outdoor use better than polycarbonate and maintains clarity over time.
For technical drawings and 3-D models, click on a part number.
- Color: See table
- Temperature Range: -40° to 170° F
- Tensile Strength: 10,000-11,250 psi (Good)
- Impact Strength: 0.3-0.4 ft.-lbs./in. (Poor)
- Hardness: Rockwell M94-M100 (Hard)
- For Use Outdoors: Yes
- Specifications Met: FDA Compliant 21 CFR 177.1010, USP Class VI
Clear Impact-Resistant Polycarbonate Sheets and Bars
At only half the weight of glass, these polycarbonate sheets and bars are often used for windows, machine guards, instrument gauge covers, and signs. Polycarbonate is comparable to Lexan, Hyzod, Tuffak, and Makrolon. It has greater impact strength than Plexiglas® Acrylic and can be used in similar applications. Sheets and bars that meet UL 972 are rated as burglar resistant.
Gray and bronze sheets and bars are useful in light-sensitive applications where a see-through material is required.
For technical drawings and 3-D models, click on a part number.
- Color: See table
- Temperature Range: -40° to 180° F
- Tensile Strength: 8,900-9,500 psi (Good)
- Impact Strength: 12-18 ft.-lbs./in. (Excellent)
- Hardness: Rockwell R118 (Hard)
- For Use Outdoors: See table
- Specifications Met: See table
| Thick. | Thick. Tolerance | Color | For Use Outdoors | Specifications Met | Each | |
12" × 12" | ||||||
|---|---|---|---|---|---|---|
| 1/8" | -0.013" to 0" | Bronze | Yes | UL 94 V-2, UL 972 | 00000000 | 00000 |
| 3/16" | -0.02" to 0" | Bronze | Yes | UL 94 V-2, UL 972 | 00000000 | 00000 |
| 1/4" | -0.026" to 0" | Bronze | Yes | UL 94 V-0, UL 972 | 00000000 | 00000 |
24" × 24" | ||||||
| 1/8" | -0.013" to 0" | Bronze | Yes | UL 94 V-2, UL 972 | 00000000 | 00000 |
| 3/16" | -0.02" to 0" | Bronze | Yes | UL 94 V-2, UL 972 | 00000000 | 00000 |
| 1/4" | -0.026" to 0" | Bronze | Yes | UL 94 V-0, UL 972 | 00000000 | 00000 |
48" × 48" | ||||||
| 1/8" | -0.013" to 0" | Bronze | Yes | UL 94 V-2, UL 972 | 00000000 | 00000 |
| 3/16" | -0.02" to 0" | Bronze | Yes | UL 94 V-2, UL 972 | 00000000 | 000000 |
| 1/4" | -0.026" to 0" | Bronze | Yes | UL 94 V-0, UL 972 | 00000000 | 000000 |
Grind-Your-Own Lathe Tool Blanks
Grind these hardened steel blanks to the size and shape you need.
PM T15 high-speed steel has excellent wear resistance and good heat resistance for use on all metal and plastic.
For technical drawings and 3-D models, click on a part number.
Shank | PM T15 High-Speed Steel | |||||
|---|---|---|---|---|---|---|
| Wd. | Ht. | Overall Lg. | End Shape | Bevel Angle | Each | |
| 1/8" | 1/8" | 2 1/2" | Beveled | 10° | 0000000 | 000000 |
| 3/16" | 3/16" | 2 1/2" | Beveled | 10° | 0000000 | 00000 |
| 1/4" | 1/4" | 2 1/2" | Beveled | 10° | 0000000 | 00000 |
| 5/16" | 5/16" | 2 1/2" | Beveled | 10° | 0000000 | 00000 |
| 3/8" | 3/8" | 3" | Beveled | 10° | 0000000 | 00000 |
| 7/16" | 7/16" | 3 1/2" | Beveled | 10° | 0000000 | 00000 |
| 1/2" | 1/2" | 4" | Beveled | 10° | 0000000 | 00000 |
| 5/8" | 5/8" | 4 1/2" | Beveled | 10° | 0000000 | 00000 |
| 3/4" | 3/4" | 5" | Beveled | 10° | 0000000 | 00000 |
| 7/8" | 7/8" | 6" | Beveled | 10° | 0000000 | 000000 |
| 1" | 1" | 7" | Beveled | 10° | 0000000 | 000000 |