Often called architectural bronze, 385 brass is easy to machine and has excellent formability when heated. It is typically used for handrails, ornamental trim, and hardware, such as hinges and lock bodies.

Often called architectural bronze, 385 brass is easy to machine and has excellent formability when heated. It is typically used for handrails, ornamental trim, and hardware, such as hinges and lock bodies.

Offering excellent antifriction qualities, 932 bronze also offers good strength and wear resistance. It's also known as SAE 660 and is often used for bearings, bushings, and thrust washers.

These rods are precision ground for a tight diameter tolerance of ±0.0005".

The thickness and width are oversized to allow for finishing.

Powdered bronze is pressed and then impregnated with SAE 30 oil to make this material self-lubricating.

An excellent alternative to oil-filled bronze, graphite-filled bronze provides dry lubrication in temperatures as high as 700° F.

Thickness and width are oversized to allow for finishing.

954 bronze contains a minimum of 10% aluminum for strength and weldability. It is also known as aluminum bronze. It's widely used for bearings, bushings, valve bodies, and worm gears.

Frequently called manganese brass, 863 bronze can handle heavy loads and high speeds when properly lubricated. These bars are a higher-strength alternative to tight-tolerance 954 bearing bronze bars.

Frequently called manganese brass, 863 bronze can handle heavy loads and high speeds when properly lubricated.

An easier-to-machine alternative to 932 bronze, 936 also has better corrosion resistance. It's also called modified SAE 64.

Known for its ability to resist stress cracking and fatigue, 544 bronze also offers good formability and excellent machinability. It's commonly called phosphor bronze.

Because 510 bronze is very strong and formable, it is the best choice for applications involving repetitive motion, such as springs and bellows.

Because 510 bronze is very strong and formable, it is the best choice for applications involving repetitive motion, such as springs and bellows.

A low-lead alternative to 316 bronze, 642 bronze is just as machinable with higher strength. It is also called aluminum-silicon-bronze.

The addition of nickel gives 630 bronze high strength. It is also called aluminum-nickel-bronze.

Manufactured from Rulon PTFE, a PTFE that's modified with filler material for a super-slippery, impact-resistant surface that resists wear.

Cut this stock into custom shapes to fit your application.