Brushed Stainless Steel | McMaster-Carr

Filter by

System of Measurement

Thickness

Width

Shape

Length

Material

Stainless Steel Appearance Number

DFARS Specialty Metals

Specifications Met

Fabrication

Performance

Magnetic Properties

Yield Strength

Hardness

REACH

Elongation

Maximum Temperature

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

RoHS

Compliant

Export Control Classification Number (ECCN)

Hardness Rating

Wall Thickness

Outside Width

Outside Height

349 Products

About Stainless Steel

Compare over 25 types of stainless steel to find the right material for you—all with material certificates for traceability.

Performance

Corrosion Resistant

Stand up to salt water and mild chemicals, such as ammonia

314 products

Highly Corrosion Resistant

Withstand prolonged exposure to salt water and most harsh chemicals

35 products

Performance

High Temperature

Maintain corrosion resistance in 1500° F or hotter

329 products

Machinable

Drill, mill, or turn without producing long chips or leaving a rough finish

20 products

Polished Multipurpose 304 Stainless Steel Sheets

Made into decorative enclosures and industrial workstations, these sheets are polished to a smooth finish on one side. A peel-off film shields the surface until you’re ready to work. Not sure which finish you want? Order a selector pack (shown below) to get a sample of each.

304 stainless steel is a good all-around choice for a wide range of applications. It maintains its corrosion resistance even in temperatures as hot as 1500° F.

Brushed #3—This finish has grain lines running in one direction to mask fingerprints.

Brushed #4—Often called a satin finish, it’s similar to a #3 finish but has finer, more uniform grain lines. It provides a smooth, directional grain for a clean, decorative appearance often used in architectural, food-processing, and sanitary applications.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

	Wd.	Lg.	Fabrication	Hardness	Specs. Met		Each
Brushed #3
Brushed #3






				0.024" Thick (-0.004" to 0.004" Tolerance)

				6"	6"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K111	00000


				12"	12"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K31	00000
				12"	18"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K112	00000
				12"	24"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K41	00000
				12"	48"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K113	00000
				24"	24"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K51	00000
				24"	36"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K71	00000
				24"	48"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K114	00000
				36"	48"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K81	000000
				36"	96"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K61	000000




						0.03" Thick (-0.003" to 0.003" Tolerance)

						6"	6"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K121	0000


						12"	12"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K32	00000
						12"	18"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K122	00000
						12"	24"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K42	00000
						12"	48"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K123	00000
						24"	24"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K52	00000
						24"	36"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K72	00000
						24"	48"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K124	000000
						36"	48"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K82	000000
						36"	96"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K62	000000




								0.036" Thick (-0.003" to 0.003" Tolerance)

								6"	6"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K131	00000


								12"	12"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K33	00000
								12"	18"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K132	00000
								12"	24"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K43	00000
								12"	48"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K133	00000
								24"	24"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K53	00000
								24"	36"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K73	00000
								24"	48"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K134	000000
								36"	48"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K83	000000
								36"	96"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K63	000000




										0.048" Thick (-0.003" to 0.003" Tolerance)

										6"	6"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K141	00000


12"	12"									Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K34	00000
12"	18"									Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K142	00000
12"	24"									Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K44	00000
12"	48"	Cold Worked								Rockwell B80 (Medium)	ASTM A240	89815K143	000000
24"	24"	Cold Worked	Rockwell B80 (Medium)							ASTM A240	89815K54	00000
24"	36"	Cold Worked	Rockwell B80 (Medium)							ASTM A240	89815K74	000000
24"	48"	Cold Worked	Rockwell B80 (Medium)							ASTM A240	89815K144	000000
36"	48"	Cold Worked	Rockwell B80 (Medium)							ASTM A240	89815K84	000000
36"	96"	Cold Worked	Rockwell B80 (Medium)							ASTM A240	89815K64	000000




		0.06" Thick (-0.006" to 0.006" Tolerance)

		6"	6"							Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K151	00000


		12"	12"							Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K35	00000
		12"	18"							Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K152	00000
		12"	24"							Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K45	00000
		12"	48"							Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K153	000000
		24"	24"	Cold Worked						Rockwell B80 (Medium)	ASTM A240	89815K55	000000
		24"	36"	Cold Worked	Rockwell B80 (Medium)					ASTM A240	89815K75	000000
		24"	48"	Cold Worked	Rockwell B80 (Medium)					ASTM A240	89815K154	000000
		36"	48"	Cold Worked	Rockwell B80 (Medium)					ASTM A240	89815K85	000000
		36"	96"	Cold Worked	Rockwell B80 (Medium)					ASTM A240	89815K65	000000




				0.075" Thick (-0.006" to 0.006" Tolerance)

				6"	6"					Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K161	00000


				12"	12"					Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K36	00000
				12"	18"					Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K162	00000
				12"	24"					Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K46	00000
				12"	48"					Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K163	000000
				24"	24"					Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K56	000000
				24"	36"	Cold Worked				Rockwell B80 (Medium)	ASTM A240	89815K76	000000
				24"	48"	Cold Worked	Rockwell B80 (Medium)			ASTM A240	89815K164	000000
				36"	48"	Cold Worked	Rockwell B80 (Medium)			ASTM A240	89815K86	000000
				36"	96"	Cold Worked	Rockwell B80 (Medium)			ASTM A240	89815K66	000000




						0.09" Thick (-0.005" to 0.005" Tolerance)

						6"	6"			Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K171	00000


						12"	12"			Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K172	00000
						12"	18"			Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K173	000000
						12"	24"			Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K174	000000
						12"	48"			Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K175	000000
						24"	24"			Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K176	000000
						24"	36"			Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K177	000000
						24"	48"	Cold Worked		Rockwell B80 (Medium)	ASTM A240	89815K178	000000
						36"	48"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K179	000000
						36"	96"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K181	000000




								0.12" Thick (-0.005" to 0.005" Tolerance)

								6"	6"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K182	00000


								12"	12"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K37	00000
								12"	18"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K183	000000
								12"	24"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K47	000000
12"								48"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K184	000000
24"	24"							Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K57	000000
24"	36"							Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K77	000000
24"	48"							Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K185	000000
36"	48"							Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K87	000000
36"	96"							Cold Worked	Rockwell B80 (Medium)	ASTM A240	89815K67	000000


Brushed #4
Brushed #4






										0.03" Thick (-0.004" to 0.004" Tolerance)

										6"	6"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K21	0000


		6"	12"							Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K41	00000
		12"	12"							Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K11	00000
		12"	18"							Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K111	00000
		12"	24"							Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K31	00000
		12"	36"							Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K61	00000
		12"	48"							Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K71	00000
		24"	24"							Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K51	00000
		24"	36"							Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K81	000000
		24"	48"							Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K112	000000
		36"	48"							Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K91	000000


		36"	96"							Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K101	000000




				0.036" Thick (-0.004" to 0.004" Tolerance)

				6"	6"					Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K22	00000


				6"	12"					Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K42	00000
				12"	12"					Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K12	00000
				12"	18"					Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K201	00000
				12"	24"					Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K32	00000
				12"	36"					Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K62	00000
				12"	48"					Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K72	000000
				24"	24"					Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K52	000000
				24"	36"					Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K82	000000
				24"	48"					Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K202	000000
				36"	48"					Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K92	000000


				36"	96"					Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K102	000000




						0.048" Thick (-0.004" to 0.004" Tolerance)

						6"	6"			Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K23	00000


						6"	12"			Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K43	00000
						12"	12"			Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K13	00000
						12"	18"			Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K301	00000
						12"	24"			Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K33	00000
						12"	36"			Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K63	00000
						12"	48"			Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K73	000000
						24"	24"			Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K53	000000
						24"	36"			Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K83	000000
24"						48"	Cold Worked			Rockwell B80 (Medium)	ASTM A240	9748K302	000000
36"	48"					Cold Worked	Rockwell B80 (Medium)			ASTM A240	9748K93	000000


36"	96"					Cold Worked	Rockwell B80 (Medium)			ASTM A240	9748K103	000000




						0.06" Thick (-0.004" to 0.004" Tolerance)

						6"	6"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K24	00000


						6"	12"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K44	00000
						12"	12"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K14	00000
						12"	18"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K401	00000
						12"	24"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K34	00000
						12"	36"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K64	000000
						12"	48"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K74	000000
						24"	24"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K54	000000
						24"	36"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K84	000000
						24"	48"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K402	000000
						36"	48"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K94	000000


						36"	96"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K104	000000




						0.078" Thick (-0.005" to 0.005" Tolerance)

						6"	6"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K25	00000


						6"	12"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K45	00000
						12"	12"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K15	00000
						12"	18"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K501	00000
						12"	24"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K35	00000
						12"	36"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K65	000000
						12"	48"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K75	000000
						24"	24"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K55	000000
						24"	36"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K85	000000
						24"	48"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K502	000000
						36"	48"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K95	000000


						36"	96"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K105	000000




						0.105" Thick (-0.007" to 0.007" Tolerance)

						6"	6"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K26	00000


						6"	12"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K46	00000
						12"	12"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K16	00000
						12"	18"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K601	000000
						12"	24"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K36	000000
						12"	36"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K66	000000
						12"	48"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K76	000000
						24"	24"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K56	000000
						24"	36"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K86	000000
						24"	48"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K602	000000
						36"	48"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K96	000000


						36"	96"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K106	000000




						0.12" Thick (-0.007" to 0.007" Tolerance)

						6"	6"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K27	00000


						6"	12"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K47	00000
						12"	12"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K17	00000
						12"	18"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K701	000000
						12"	24"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K37	000000
						12"	36"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K67	000000
						12"	48"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K77	000000
						24"	24"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K57	000000
						24"	36"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K87	000000
						24"	48"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K702	000000
						36"	48"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K97	000000


						36"	96"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K107	00000000




						0.18" Thick (-0.007" to 0.007" Tolerance)

						6"	6"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K28	00000


						6"	12"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K48	00000
						12"	12"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K18	000000
						12"	18"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K801	000000
						12"	24"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K38	000000
						12"	36"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K68	000000
						12"	48"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K78	000000
						24"	24"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K58	000000
						24"	36"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K88	000000
						24"	48"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K802	000000
						36"	48"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K98	000000


						36"	96"	Cold Worked	Rockwell B80 (Medium)	ASTM A240	9748K108	00000000




						1/4" Thick (-0.01" to 0.01" Tolerance)

						12"	12"	Hot Rolled	Rockwell B80 (Medium)	ASTM A240	9748K19	00000


						12"	18"	Hot Rolled	Rockwell B80 (Medium)	ASTM A240	9748K901	000000
						12"	24"	Hot Rolled	Rockwell B80 (Medium)	ASTM A240	9748K39	000000
						24"	24"	Hot Rolled	Rockwell B80 (Medium)	ASTM A240	9748K59	000000
						24"	48"	Hot Rolled	Rockwell B80 (Medium)	ASTM A240	9748K903	000000




								1/4" Thick (-0.01" to 0.022" Tolerance)

								6"	6"	Hot Rolled	Rockwell B80 (Medium)	ASTM A240	4529T91	00000


12"								48"	Hot Rolled	Rockwell B80 (Medium)	ASTM A240	4529T97	000000
24"	36"							Hot Rolled	Rockwell B80 (Medium)	ASTM A240	4529T98	000000
36"	48"							Hot Rolled	Rockwell B80 (Medium)	ASTM A240	4529T99	000000
36"	96"							Hot Rolled	Rockwell B80 (Medium)	ASTM A240	4529T909	00000000




								3/8" Thick (-0.07" to 0.07" Tolerance)

								12"	18"	Hot Rolled	Rockwell B80 (Medium)	ASTM A240	9748K902	000000




										3/8" Thick (-0.01" to 0.05" Tolerance)

										6"	6"	Hot Rolled	Rockwell B80 (Medium)	ASTM A240	4529T11	00000


										12"	12"	Hot Rolled	Rockwell B80 (Medium)	ASTM A240	4529T12	000000
										12"	24"	Hot Rolled	Rockwell B80 (Medium)	ASTM A240	4529T15	000000
		12"								48"	Hot Rolled	Rockwell B80 (Medium)	ASTM A240	4529T17	000000
		24"	24"							Hot Rolled	Rockwell B80 (Medium)	ASTM A240	4529T13	000000
		24"	36"							Hot Rolled	Rockwell B80 (Medium)	ASTM A240	4529T18	000000

Selector Packs

Includes		Each
One brushed #3, brushed #4, mirror-like #8, and an unpolished piece.	1113T11	000000

Polished Multipurpose 304 Stainless Steel Strips


	Brushed #3

Made into decorative enclosures and industrial workstations, these strips are polished to a smooth finish on one side. A peel-off film shields the surface until you’re ready to work.

304 stainless steel is a good all-around choice for a wide range of applications. It maintains its corrosion resistance even in temperatures as hot as 1500° F.

Brushed #3—This finish has grain lines running in one direction to mask fingerprints.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

	Wd.	Lg.	Fabrication	Hardness	Specs. Met		Each
Brushed #3







				0.024" Thick (-0.004" to 0.004" Tolerance)

				1"	24"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	9085K003	000000


				2"	12"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	9085K13	00000
				2"	24"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	9085K03	00000
				3"	12"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	9085K53	00000
				3"	24"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	9085K33	00000
				4"	12"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	9085K23	00000
				4"	24"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	9085K63	00000
				5"	12"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	9085K73	00000
				5"	24"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	9085K83	00000
				6"	24"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	9085K43	00000




						0.048" Thick (-0.005" to 0.005" Tolerance)

						1"	24"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	9085K004	00000


						2"	12"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	9085K14	00000
						2"	24"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	9085K04	00000
						3"	12"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	9085K54	00000
						3"	24"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	9085K34	00000
						4"	12"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	9085K24	00000
						4"	24"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	9085K64	00000
						5"	12"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	9085K74	00000
						5"	24"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	9085K84	00000
						6"	24"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	9085K44	00000




								0.063" Thick (-0.006" to 0.006" Tolerance)

								1"	24"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	9085K001	00000


								2"	12"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	9085K11	00000
								2"	24"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	9085K01	00000
								3"	12"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	9085K51	00000
								3"	24"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	9085K31	00000
								4"	12"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	9085K21	00000
								4"	24"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	9085K61	00000
								5"	12"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	9085K71	00000
								5"	24"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	9085K81	00000
								6"	24"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	9085K41	00000




										0.09" Thick (-0.007" to 0.007" Tolerance)

										1"	24"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	9085K005	00000


2"	12"									Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	9085K15	00000
2"	24"									Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	9085K05	00000
3"	12"									Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	9085K55	00000
3"	24"	Cold Rolled								Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	9085K35	00000
4"	12"	Cold Rolled	Rockwell B95 (Medium)							ASTM A240, SAE AMS5513	9085K25	00000
4"	24"	Cold Rolled	Rockwell B95 (Medium)							ASTM A240, SAE AMS5513	9085K65	00000
5"	12"	Cold Rolled	Rockwell B95 (Medium)							ASTM A240, SAE AMS5513	9085K75	00000
5"	24"	Cold Rolled	Rockwell B95 (Medium)							ASTM A240, SAE AMS5513	9085K85	00000
6"	24"	Cold Rolled	Rockwell B95 (Medium)							ASTM A240, SAE AMS5513	9085K45	00000




		1/8" Thick (-0.009" to 0.009" Tolerance)

		1"	24"							Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	9085K002	00000


		2"	12"							Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	9085K12	00000
		2"	24"							Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	9085K02	00000
		3"	12"							Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	9085K52	00000
		3"	24"							Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	9085K32	00000
		4"	12"	Cold Rolled						Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	9085K22	00000
		4"	24"	Cold Rolled	Rockwell B95 (Medium)					ASTM A240, SAE AMS5513	9085K62	00000
		5"	12"	Cold Rolled	Rockwell B95 (Medium)					ASTM A240, SAE AMS5513	9085K72	00000
		5"	24"	Cold Rolled	Rockwell B95 (Medium)					ASTM A240, SAE AMS5513	9085K82	00000
		6"	24"	Cold Rolled	Rockwell B95 (Medium)					ASTM A240, SAE AMS5513	9085K42	000000




				0.187" Thick (-0.007" to 0.007" Tolerance)

				1"	24"					Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	9085K006	00000


				2"	12"					Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	9085K16	00000
				2"	24"					Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	9085K06	00000
				3"	12"					Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	9085K56	00000
				3"	24"					Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	9085K36	00000
				4"	12"					Cold Rolled	Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	9085K26	00000
				4"	24"	Cold Rolled				Rockwell B95 (Medium)	ASTM A240, SAE AMS5513	9085K66	000000
				5"	12"	Cold Rolled	Rockwell B95 (Medium)			ASTM A240, SAE AMS5513	9085K76	00000
				5"	24"	Cold Rolled	Rockwell B95 (Medium)			ASTM A240, SAE AMS5513	9085K86	000000
				6"	24"	Cold Rolled	Rockwell B95 (Medium)			ASTM A240, SAE AMS5513	9085K46	000000

Polished Multipurpose 304 Stainless Steel Bars


	Brushed #4

Made into decorative enclosures and industrial workstations, these bars are polished to a smooth finish on all sides. A peel-off film shields the surface until you’re ready to work.

304 stainless steel is a good all-around choice for a wide range of applications. It maintains its corrosion resistance even in temperatures as hot as 1500° F.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

		1/2 ft. Long	1 ft. Long	2 ft. Long	3 ft. Long	6 ft. Long
Brushed #4







	1/4" Thick (-0.01" to 0.05" Tolerance)

	1"	Rockwell B90 (Medium)	ASTM A240	4539T11	000000	000000	000000	000000	0000000


	2"	Rockwell B90 (Medium)	ASTM A240	4539T12	00000	00000	00000	00000	000000
	3"	Rockwell B90 (Medium)	ASTM A240	4539T13	00000	00000	00000	000000	000000




			1/2" Thick (-0.015" to 0.015" Tolerance)

			1"	Not Rated	—	4539T17	00000	00000	00000	000000	000000


			2"	Not Rated	—	4539T18	00000	00000	000000	000000	000000
			3"	Not Rated	—	4539T19	00000	000000	000000	000000	000000




					1" Thick (-0.02" to 0.02" Tolerance)

					1"	Not Rated	—	4539T24	00000	00000	000000	000000	000000


					2"	Not Rated	—	4539T25	00000	000000	000000	000000	000000
					3"	Not Rated	—	4539T26	000000	000000	000000	000000	000000

Polished Multipurpose 304 Stainless Steel Round Tubes


	Brushed #4

Polished to either a brushed or mirror-like finish on the outside, this material is widely used to fabricate decorative enclosures and industrial workstations. 304 stainless steel is a good all-around choice for a wide range of applications. It maintains its corrosion resistance in temperatures up to 1500° F.

Seamless—These tubes are more corrosion resistant than welded tubes because they don’t have a seam that could potentially introduce impurities.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

	Fabrication	Hardness	Specs. Met		1 ft. Long	3 ft. Long	6 ft. Long
Brushed #4







	1 mm Thick Wall (-0.015 mm to 0.015 mm Tolerance)

	10	-0.130 to 0.130	8	Seamless	Rockwell B70 (Medium)	ASTM A269	5366T11	000000	000000	0000000


	15	-0.130 to 0.130	13	Seamless	Rockwell B70 (Medium)	ASTM A269	5366T15	00000	00000	000000
	20	-0.130 to 0.130	18	Seamless	Rockwell B70 (Medium)	ASTM A269	5366T16	00000	000000	000000




			2 mm Thick Wall (-0.03 mm to 0.03 mm Tolerance)

			8	-0.130 to 0.130	4	Seamless	Rockwell B70 (Medium)	ASTM A269	5366T17	00000	000000	000000


			10	-0.130 to 0.130	6	Seamless	Rockwell B70 (Medium)	ASTM A269	5366T18	00000	000000	000000
			12	-0.130 to 0.130	8	Seamless	Rockwell B70 (Medium)	ASTM A269	5366T19	00000	000000	000000
			15	-0.130 to 0.130	11	Seamless	Rockwell B70 (Medium)	ASTM A269	5366T25	00000	000000	000000
			20	-0.130 to 0.130	16	Seamless	Rockwell B70 (Medium)	ASTM A269	5366T26	00000	000000	000000
			25	-0.130 to 0.130	21	Seamless	Rockwell B70 (Medium)	ASTM A269	5366T27	00000	000000	000000
			50	-0.250 to 0.250	46	Seamless	Rockwell B70 (Medium)	ASTM A269	5366T28	000000	000000	000000




					3 mm Thick Wall (-0.3 mm to 0.3 mm Tolerance)

					12	-0.130 to 0.130	6	Seamless	Rockwell B70 (Medium)	ASTM A269	5366T29	00000	000000	000000


					15	-0.130 to 0.130	9	Seamless	Rockwell B70 (Medium)	ASTM A269	5366T31	00000	000000	000000
					20	-0.130 to 0.130	14	Seamless	Rockwell B70 (Medium)	ASTM A269	5366T32	00000	000000	000000
					25	-0.130 to 0.130	19	Seamless	Rockwell B70 (Medium)	ASTM A269	5366T33	000000	000000	000000
					50	-0.250 to 0.250	44	Seamless	Rockwell B70 (Medium)	ASTM A269	5366T34	000000	000000	000000

Polished Highly Corrosion-Resistant 316 Stainless Steel Sheets

Brushed #4

One side of these sheets is polished to either a brushed or mirror-like finish, then covered in a protective peel-off film. One of the most corrosion-resistant types of stainless steel, 316 stands up to the harshest chemicals, including bleach, chlorine, and phosphoric acid. It's a step up from 304, which has similar strength and temperature performance. Use it in a variety of marine and chemical-processing applications. It maintains its corrosion resistance in temperatures up to 1500° F.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

	Wd.	Lg.	Fabrication	Hardness	Specs. Met		Each
Brushed #4







				0.03" Thick (-0.007" to 0.007" Tolerance)

				12"	12"	Cold Worked	Rockwell B95 (Medium)	ASTM A240	9745K11	000000


				12"	24"	Cold Worked	Rockwell B95 (Medium)	ASTM A240	9745K31	00000
				24"	24"	Cold Worked	Rockwell B95 (Medium)	ASTM A240	9745K51	000000




						0.036" Thick (-0.007" to 0.007" Tolerance)

						12"	12"	Cold Worked	Rockwell B95 (Medium)	ASTM A240	9745K12	00000


						12"	24"	Cold Worked	Rockwell B95 (Medium)	ASTM A240	9745K32	000000
						24"	24"	Cold Worked	Rockwell B95 (Medium)	ASTM A240	9745K52	000000




								0.048" Thick (-0.007" to 0.007" Tolerance)

								6"	6"	Cold Worked	Rockwell B95 (Medium)	ASTM A240	9745K63	00000


								12"	12"	Cold Worked	Rockwell B95 (Medium)	ASTM A240	9745K13	00000
								12"	24"	Cold Worked	Rockwell B95 (Medium)	ASTM A240	9745K33	000000
								24"	24"	Cold Worked	Rockwell B95 (Medium)	ASTM A240	9745K53	000000




										0.06" Thick (-0.01" to 0.01" Tolerance)

										6"	6"	Cold Worked	Rockwell B95 (Medium)	ASTM A240	9745K64	00000


										12"	12"	Cold Worked	Rockwell B95 (Medium)	ASTM A240	9745K14	00000
										12"	24"	Cold Worked	Rockwell B95 (Medium)	ASTM A240	9745K34	000000
										24"	24"	Cold Worked	Rockwell B95 (Medium)	ASTM A240	9745K54	000000




												0.075" Thick (-0.01" to 0.01" Tolerance)

												6"	6"	Cold Worked	Rockwell B95 (Medium)	ASTM A240	9745K65	00000


												12"	12"	Cold Worked	Rockwell B95 (Medium)	ASTM A240	9745K15	00000
												12"	24"	Cold Worked	Rockwell B95 (Medium)	ASTM A240	9745K35	000000
												24"	24"	Cold Worked	Rockwell B95 (Medium)	ASTM A240	9745K55	000000




	0.105" Thick (-0.01" to 0.01" Tolerance)

	6"												6"	Cold Worked	Rockwell B95 (Medium)	ASTM A240	9745K66	00000


	12"	12"											Cold Worked	Rockwell B95 (Medium)	ASTM A240	9745K16	000000
	12"	24"	Cold Worked										Rockwell B95 (Medium)	ASTM A240	9745K36	000000
	24"	24"	Cold Worked										Rockwell B95 (Medium)	ASTM A240	9745K56	000000




			0.12" Thick (-0.01" to 0.01" Tolerance)

			6"										6"	Cold Worked	Rockwell B95 (Medium)	ASTM A240	9745K67	000000


			12"	12"									Cold Worked	Rockwell B95 (Medium)	ASTM A240	9745K17	000000
			12"	24"	Cold Worked								Rockwell B95 (Medium)	ASTM A240	9745K37	000000
			24"	24"	Cold Worked								Rockwell B95 (Medium)	ASTM A240	9745K57	000000




					0.187" Thick (-0.01" to 0.01" Tolerance)

					6"								6"	Cold Worked	Rockwell B95 (Medium)	ASTM A240	9745K68	000000


					12"	12"							Cold Worked	Rockwell B95 (Medium)	ASTM A240	9745K18	000000
					12"	24"	Cold Worked						Rockwell B95 (Medium)	ASTM A240	9745K38	000000
					24"	24"	Cold Worked						Rockwell B95 (Medium)	ASTM A240	9745K58	000000




							1/4" Thick (-0.01" to 0.01" Tolerance)

							6"						6"	Cold Worked	Rockwell B95 (Medium)	ASTM A240	9745K69	000000


							12"						12"	Cold Worked	Rockwell B95 (Medium)	ASTM A240	9745K19	000000
							12"	24"					Cold Worked	Rockwell B95 (Medium)	ASTM A240	9745K39	000000
							24"	24"	Cold Worked				Rockwell B95 (Medium)	ASTM A240	9745K59	00000000

Selector Packs

Includes		Each
A brushed #4, a mirror-like #8, and an unpolished piece.	1121T11	000000

Polished Magnetic 430 Stainless Steel Sheets


	Brushed #3

For a sleek look, these sheets are polished to a smooth finish on one side. A peel-off film shields the surface until you're ready to work.

430 stainless steel is often made into magnetic parts, such as appliance panels, for decorative and light structural applications. It stays corrosion resistant in temperatures as hot as 1250° F.

Brushed #3—This finish has grain lines running in one direction to mask fingerprints.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

	Hardness	Specs. Met		Each
Brushed #3







	0.035" Thick (-0.002" to 0.002" Tolerance)

	6"	12"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240	1292T28	000000


	12"	12"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240	1292T11	00000
	12"	24"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240	1292T12	00000
	24"	24"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240	1292T13	000000
	48"	48"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240	1292T14	000000




			0.046" Thick (-0.004" to 0.004" Tolerance)

			6"	12"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240	1292T29	00000


			12"	12"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240	1292T15	00000
			12"	24"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240	1292T16	00000
			24"	24"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240	1292T17	000000
			48"	48"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240	1292T18	000000




					0.06" Thick (-0.004" to 0.004" Tolerance)

					6"	12"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240	1292T31	00000


					12"	12"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240	1292T19	00000
					12"	24"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240	1292T21	000000
					24"	24"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240	1292T22	000000
					48"	48"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240	1292T23	000000




							0.075" Thick (-0.004" to 0.004" Tolerance)

							6"	12"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240	1292T32	00000


							12"	12"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240	1292T24	00000
							12"	24"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240	1292T25	000000
							24"	24"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240	1292T26	000000
							48"	48"	Cold Rolled	Rockwell B95 (Medium)	ASTM A240	1292T27	000000

Polished Multipurpose 304 Stainless Steel Rectangular Tubes

Brushed #4

Polished to a brushed finish on the outside, these tubes are often used to create decorative enclosures and industrial workstations that hold up in corrosive environments. They have flat sides, which make them easy to mount. Formed from flat stainless steel strip and welded along the seam, these tubes have consistent dimensions and gently rounded corners that reduce stress points, improve strength, and create a smooth, easy-to-clean surface. They meet ASTM A554 specifications for use in structural applications but are not for use in fluid-handling or pressure-rated systems. These tubes maintain their corrosion resistance up to 1500° F.

Square Profile—Often used for posts and supports where loads can shift or come from multiple directions. With four uniform sides, these tubes distribute loads evenly across their surface. They bend consistently under uniform loads, so orientation is less critical.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

	Outside		Inside
	Ht.	Wd.	Ht.	Wd.	Wall Thk. Tolerance	Appearance	Fabrication	Hardness	Specs. Met		1 ft. Long	3 ft. Long	6 ft. Long
Square Profile







				0.065" Thick Wall (16 ga.)

				1"	1"	0.87"	0.87"	-0.007" to 0.007"	Brushed #4	Welded	Not Rated	ASTM A554	89825K49	000000	000000	000000


				1 1/2"	1 1/2"	1.37"	1.37"	-0.007" to 0.007"	Brushed #4	Welded	Not Rated	ASTM A554	89825K51	00000	00000	000000




						0.12" Thick Wall (11 ga.)

						1 1/2"	1 1/2"	1.26"	1.26"	-0.012" to 0.012"	Brushed #4	Welded	Not Rated	ASTM A554	89825K53	00000	00000	000000


						2"	2"	1.76"	1.76"	-0.012" to 0.012"	Brushed #4	Welded	Not Rated	ASTM A554	89825K55	00000	000000	000000

Stainless Steel Foil

304 Stainless Steel—From cookware to chemical-processing equipment, 304 stainless steel is a good all-around choice for a wide range of applications. It maintains its corrosion resistance in temperatures up to 1500° F.

Polished 304 Stainless Steel—Polished to either a brushed or mirror-like finish, this material is widely used to fabricate decorative enclosures and industrial workstations. 304 stainless steel is a good all-around choice for a wide range of applications. It maintains its corrosion resistance in temperatures up to 1500° F.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

	Lg., ft.	Fabrication	Hardness	Specs. Met	Appearance		Each
Polished 304 Stainless Steel







	Plain Backing

	0.002"	-0.0002" to 0.0002"	12"	50	Cold Worked	Rockwell B80 (Medium)	ASTM A240	Brushed	3254K43	0000000


	0.002"	-0.0002" to 0.0002"	12"	100	Cold Worked	Rockwell B80 (Medium)	ASTM A240	Brushed	3254K46	000000
	0.002"	-0.0002" to 0.0002"	24"	50	Cold Worked	Rockwell B80 (Medium)	ASTM A240	Brushed	3254K53	000000
	0.002"	-0.0002" to 0.0002"	24"	100	Cold Worked	Rockwell B80 (Medium)	ASTM A240	Brushed	3254K56	000000
	0.005"	-0.0003" to 0.0003"	12"	10	Cold Worked	Rockwell B80 (Medium)	ASTM A240	Brushed	3254K221	000000
	0.005"	-0.0003" to 0.0003"	12"	25	Cold Worked	Rockwell B80 (Medium)	ASTM A240	Brushed	3254K251	000000
	0.005"	-0.0003" to 0.0003"	12"	50	Cold Worked	Rockwell B80 (Medium)	ASTM A240	Brushed	3254K431	000000
	0.005"	-0.0003" to 0.0003"	12"	100	Cold Worked	Rockwell B80 (Medium)	ASTM A240	Brushed	3254K461	000000
	0.005"	-0.0003" to 0.0003"	24"	10	Cold Worked	Rockwell B80 (Medium)	ASTM A240	Brushed	3254K321	000000
	0.005"	-0.0003" to 0.0003"	24"	25	Cold Worked	Rockwell B80 (Medium)	ASTM A240	Brushed	3254K351	000000
	0.005"	-0.0003" to 0.0003"	24"	50	Cold Worked	Rockwell B80 (Medium)	ASTM A240	Brushed	3254K531	000000


	0.005"	-0.0003" to 0.0003"	24"	100	Cold Worked	Rockwell B80 (Medium)	ASTM A240	Brushed	3254K561	00000000