The handle makes it easy to brush by hand. Clean delicate surfaces inside tubes, pipes, and holes.

These sets include brushes in the most common screw sizes.

Clean delicate surfaces inside tubes, pipes, and holes.

The handle makes it easy to brush by hand.

These brushes withstand temperatures up to 500°.

These sets include brushes in the most common screw sizes.

Change brush tips to clean different tube sizes.

Attach the shank to a handle or power tool.

Made of phosphorus bronze that is Factory Mutual approved, these brushes inhibit sparking and are nonmagnetic and corrosion resistant.

Use for tasks such as removing weld slag, heavy surface contamination, and large burs from tubes, pipes, and holes.

Attach the shank to a handle or power tool.

Attach the shank to a handle or power tool.

Use for soft and hard deposits.

Use on delicate surfaces.

Bristles inside the housing and a protruding brush clean the inside and outside of tubes in one step.

Bristles at the top of these brushes clean the bottom of closed-end holes.

Commonly used before soldering, these brushes clean the outside of tubes.

Add length to your brush and get a better grip.

Made from FDA-listed materials, these rods can be sterilized and are suitable for food and beverage applications. They give you a longer reach and let you add a handle or another extension.

Work on delicate surfaces in tiny spaces and on very small parts.

Use two types of bristles on one brush.

Remove light-to-medium rust and stains and small burs.

Work in tiny spaces and on very small parts to remove light-to-medium rust and stains and small burs.

Made of phosphorus bronze that is Factory Mutual approved, the bristles on these brushes inhibit sparking and are nonmagnetic and corrosion resistant.

The cleaner fits into the T-slot grooves of your machine table to clear chips and debris.

These brushes have a 20 1/2" long handle.

The small brush face can access hard-to-reach spots to remove light-to-medium rust and stains and small burs.

Clean delicate surfaces in hard-to-reach spots. Use these brushes to remove light-to-medium rust and stains and small burs.

Use for tasks such as edge rounding and removing weld slag, heavy surface contamination, and large burs. The small brush face can access hard-to-reach spots.

Remove light-to-medium rust and stains and small burs with these flexible-bristle brushes.

These brushes conform to corners, curves, and irregular surfaces to remove light-to-medium rust and stains and small burs.

Abrasive grains are embedded in the entire length of the bristles so the sides act like flexible files. These brushes remove workpiece material as well as surface contamination in a single step.

Use for tasks such as removing weld slag, heavy surface contamination, and large burs.

Remove light-to-medium rust and stains and small burs with these flexible-bristle brushes.

The rigid, front-facing bristles are partially twisted for added cleaning power when removing debris from flat surfaces.

The bristles are partially twisted in alternating directions, which prevents them from separating.

Two rows of bristles cover more surface area.

Remove light-to-medium rust and stains and small burs with these flexible-bristle brushes.

The guard deflects dust and sheared-off bristle tips. Use these flexible-bristle brushes to remove light-to-medium rust and stains and small burs.

Use on delicate surfaces.

Remove light-to-medium rust and stains and small burs with these flexible-bristle brushes.

Use on delicate surfaces.

Bristles are partially twisted in alternating directions, which prevents them from separating.

A mounting nut on each side of the arbor lets you use both sides of the brush.

The abrasive lasts longer than that of standard brushes.

Remove light-to-medium rust and stains and small burs with these flexible-bristle brushes.

Use on contours and angles or for reaching into cracks and corners.

Rigid, partially twisted bristles handle tasks such as edge rounding and removing weld slag, heavy surface contamination, and large burs. Also known as knot-wire brushes.

These brushes have steel bristles for removing weld slag and heavy surface contamination.

Brushes have dense bristles that can dust, stop, and separate items on a conveyor as well as keep heat, sprayed liquids, and chips contained.

These brushes have a stainless steel backing for corrosive environments.

Brushes are made of FDA listed materials so they can be used for food and beverage conveying.

The bristles on these brushes contain a compound that metal detectors and x-ray equipment can detect.

Mount brushes by inserting them into a holder. Holders can be cut with scissors.

Brushes are made of FDA listed materials so they can be used for food and beverage conveying.

With a tight spiral bristle pattern, these brushes are effective for cleaning conveyor belts and chain.

Position these brushes on an angle to fit 11" to 29" wide conveyors. Use them for product positioning and light cleaning.

Choose the channel and wear strip or brush you need for your application.

Scrub the gunk out of floor drains and mop sinks.

Often used to clean windows and vehicles, these soft-bristled brushes won’t scratch. Their bristle block has a wrap-around bumper to protect surfaces.

Clean inside containers, pipes, and other places where most brushes can’t fit.

Clean hard-to-reach areas in pharmaceutical and food-processing plants—these scrub brushes have metal and chemical additives that set off metal detectors and show up on an X-ray if they fall into your line.

Clean small, narrow areas with these brushes.

Curl these brushes around countertop edges, faucets, and pipes for thorough cleaning.

With a blend of soft natural hair and conductive synthetic fibers, these brushes dissipate static without scratching surfaces.

These uniquely shaped brushes wrap around overhead pipes and other curved surfaces to remove dust and dirt.

Clean small pin holes and screw holes with these flexible brushes.

Made with metal and chemical additives, the bristles and handles on these brushes won’t get past metal detectors or X-ray machines in your food facility.

Commonly used to sweep away debris created during milling, drilling, and cutting, these brushes can also be used for light cleaning.

Plastic bristles resist chemicals.

Soft, flexible horsehair bristles are good for fine sweeping on hardwood flooring and tile.

Choose a steel bristle broom for dislodging heavy accumulations on rough, irregular surfaces such as concrete and brick.

The plastic bristles on these brooms resist chemicals, solvents, and acids.

An all-steel handle welded to a steel brace and mounted on a wood block makes these more durable than our other brooms for rough surfaces.

Commonly used on sidewalks and driveways, these brooms have stiff bristles that can move heavier debris than brooms for smooth surfaces.

A durable steel strip locks in bristles without the added weight of a wood or plastic block. Bristles are chemical-resistant plastic.

An all-steel handle welded to a steel brace and mounted on a wood block makes these more durable than our other brooms for semi-smooth surfaces.

They're 50% wider than our other angle brooms, allowing you to clean a larger area.

Assign colors to tasks or areas.