Material Material |
---|
|
Finish Finish |
---|
|
For Use In For Use In |
---|
|
Threading Threading |
---|
![]() | Partially Threaded |
![]() | Fully Threaded |
Tapping Method Tapping Method |
---|
![]() | ![]() |
Thread Forming | Thread Cutting |
Minimum Thread Length Minimum Thread Length |
---|
Screw Features Screw Features |
---|
![]() | ![]() |
Sealing | With Washer |
Washer Material Washer Material |
---|
|
More
A curved neck sinks into material, so these screws sit flush with the surface. Also known as deck screws, they have a sharp point and narrow body to penetrate softwood and plastic-wood composite decking material. They're made from hardened steel and have a ultra-corrosion-resistant coating that resists at least 500 hours of salt spray. Length is measured from the top of the head.
For technical drawings and 3-D models, click on a part number.
Head | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Lg. | Dia. | Ht. | Drive Size | Drill Bit Size | Approximate Threads per Inch | Threading | Min. Thread Lg. | Pkg. Qty. | Pkg. | |
Ultra-Corrosion-Resistant Coated Steel | ||||||||||
No. 6 | ||||||||||
1" | 0.328" | 3/16" | No. 2 | 5/64" | 9 | Partially Threaded | 3/4" | 300 | 000000000 | 00000 |
1 1/4" | 0.347" | 7/32" | No. 2 | 1/16" | 18 | Fully Threaded | __ | 300 | 000000000 | 0000 |
1 5/8" | 0.347" | 7/32" | No. 2 | 1/16" | 18 | Fully Threaded | __ | 200 | 000000000 | 0000 |
2" | 0.347" | 7/32" | No. 2 | 1/16" | 18 | Partially Threaded | 1.32" | 160 | 000000000 | 0000 |
No. 7 | ||||||||||
2 1/2" | 0.319" | 7/32" | No. 2 | 5/64" | 9 | Partially Threaded | 2" | 100 | 000000000 | 0000 |
No. 8 | ||||||||||
2 1/2" | 0.363" | 7/32" | No. 2 | 5/64" | 15 | Partially Threaded | 1.65" | 90 | 000000000 | 0000 |
3" | 0.363" | 7/32" | No. 2 | 5/64" | 15 | Partially Threaded | 1.98" | 80 | 000000000 | 0000 |
No. 10 | ||||||||||
3 1/2" | 0.363" | 7/32" | No. 2 | 3/32" | 13 | Partially Threaded | 2.31" | 50 | 000000000 | 0000 |
4" | 0.363" | 7/32" | No. 2 | 3/32" | 13 | Partially Threaded | 2.64" | 50 | 000000000 | 0000 |
5" | 0.342" | 3/16" | No. 2 | 5/64" | 9 | Partially Threaded | 1.65" | 35 | 000000000 | 00000 |
6" | 0.342" | 3/16" | No. 2 | 5/64" | 9 | Partially Threaded | 1.65" | 30 | 000000000 | 00000 |
18-8 stainless steel screws have good chemical resistance and are a good choice for ACQ-treated (arsenic-free) lumber. They have a curved neck that sinks into material, so they sit flush with the surface. Also known as deck screws, they have a Type 17 auger point that penetrates softwood and plastic-wood composite decking material. They may be mildly magnetic. Length is measured from the top of the head.
For technical drawings and 3-D models, click on a part number.
Head | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Lg. | Dia. | Ht. | Drive Size | Drill Bit Size | Approximate Threads per Inch | Threading | Min. Thread Lg. | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | ||||||||||
No. 6 | ||||||||||
5/8" | 0.344" | 0.197" | No. 2 | 1/16" | 18 | Partially Threaded | 0.413" | 100 | 000000000 | 000000 |
3/4" | 0.344" | 0.197" | No. 2 | 1/16" | 18 | Partially Threaded | 0.495" | 100 | 000000000 | 00000 |
1" | 0.344" | 0.197" | No. 2 | 1/16" | 18 | Partially Threaded | 0.66" | 100 | 000000000 | 00000 |
1 1/4" | 0.344" | 0.197" | No. 2 | 1/16" | 18 | Partially Threaded | 0.825" | 100 | 000000000 | 00000 |
1 5/8" | 0.344" | 0.197" | No. 2 | 1/16" | 18 | Partially Threaded | 1.073" | 100 | 000000000 | 00000 |
No. 8 | ||||||||||
3/4" | 0.344" | 0.192" | No. 2 | 5/64" | 15 | Partially Threaded | 0.495" | 100 | 000000000 | 00000 |
1 1/4" | 0.344" | 0.192" | No. 2 | 5/64" | 15 | Partially Threaded | 0.825" | 100 | 000000000 | 00000 |
1 5/8" | 0.344" | 0.192" | No. 2 | 5/64" | 15 | Partially Threaded | 1.073" | 50 | 000000000 | 00000 |
2" | 0.344" | 0.192" | No. 2 | 5/64" | 15 | Partially Threaded | 1.32" | 50 | 000000000 | 0000 |
2 1/4" | 0.344" | 0.192" | No. 2 | 5/64" | 15 | Partially Threaded | 1.485" | 50 | 000000000 | 00000 |
2 1/2" | 0.344" | 0.192" | No. 2 | 5/64" | 15 | Partially Threaded | 1.65" | 50 | 000000000 | 00000 |
3" | 0.344" | 0.192" | No. 2 | 5/64" | 15 | Partially Threaded | 1.98" | 50 | 000000000 | 0000 |
No. 10 | ||||||||||
1" | 0.344" | 0.189" | No. 2 | 3/32" | 13 | Partially Threaded | 0.66" | 100 | 000000000 | 00000 |
1 1/4" | 0.344" | 0.189" | No. 2 | 3/32" | 13 | Partially Threaded | 0.825" | 100 | 000000000 | 00000 |
1 1/2" | 0.344" | 0.189" | No. 2 | 3/32" | 13 | Partially Threaded | 0.99" | 50 | 000000000 | 0000 |
1 3/4" | 0.344" | 0.189" | No. 2 | 3/32" | 13 | Partially Threaded | 1.155" | 50 | 000000000 | 00000 |
2" | 0.344" | 0.189" | No. 2 | 3/32" | 13 | Partially Threaded | 1.32" | 50 | 000000000 | 00000 |
2 1/2" | 0.344" | 0.189" | No. 2 | 3/32" | 13 | Partially Threaded | 1.65" | 25 | 000000000 | 0000 |
3" | 0.344" | 0.189" | No. 2 | 3/32" | 13 | Partially Threaded | 1.98" | 25 | 000000000 | 0000 |
3 1/2" | 0.344" | 0.189" | No. 2 | 3/32" | 13 | Partially Threaded | 2.31" | 25 | 000000000 | 00000 |
3 3/4" | 0.344" | 0.189" | No. 2 | 3/32" | 13 | Partially Threaded | 2.475" | 25 | 000000000 | 00000 |
No. 12 | ||||||||||
2 1/2" | 0.43" | 0.203" | No. 3 | 7/64" | 7 | Partially Threaded | 1.65" | 25 | 000000000 | 0000 |
3" | 0.43" | 0.203" | No. 3 | 7/64" | 11 | Partially Threaded | 1.98" | 25 | 000000000 | 00000 |
3 1/2" | 0.43" | 0.203" | No. 3 | 7/64" | 11 | Partially Threaded | 2.31" | 10 | 000000000 | 0000 |
4" | 0.43" | 0.203" | No. 3 | 7/64" | 11 | Partially Threaded | 2.64" | 10 | 000000000 | 0000 |
4 1/2" | 0.43" | 0.203" | No. 3 | 7/64" | 11 | Partially Threaded | 2.97" | 10 | 000000000 | 0000 |
5" | 0.43" | 0.203" | No. 3 | 7/64" | 11 | Partially Threaded | 3.3" | 10 | 000000000 | 0000 |
6" | 0.43" | 0.203" | No. 3 | 7/64" | 11 | Partially Threaded | 3.96" | 10 | 000000000 | 00000 |
No. 14 | ||||||||||
3 1/2" | 0.43" | 1/4" | No. 3 | 7/64" | 10 | Partially Threaded | 2.31" | 10 | 000000000 | 0000 |
4" | 0.43" | 1/4" | No. 3 | 7/64" | 10 | Partially Threaded | 2.64" | 10 | 000000000 | 0000 |
5" | 0.43" | 1/4" | No. 3 | 7/64" | 10 | Partially Threaded | 3.3" | 10 | 000000000 | 00000 |
More corrosion resistant than 18-8 stainless steel screws, these have excellent resistance to chemicals and salt water and are a good choice for ACQ-treated (arsenic-free) lumber. They have a curved neck that sinks into material, so they sit flush with the surface. Also known as deck screws, they have a Type 17 auger point that penetrates softwood and plastic-wood composite decking material. They may be mildly magnetic. Length is measured from the top of the head.
For technical drawings and 3-D models, click on a part number.
Head | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Lg. | Dia. | Ht. | Drive Size | Drill Bit Size | Approximate Threads per Inch | Threading | Min. Thread Lg. | Pkg. Qty. | Pkg. | |
316 Stainless Steel | ||||||||||
No. 8 | ||||||||||
1 1/4" | 0.344" | 0.192" | No. 2 | 5/64" | 15 | Partially Threaded | 0.825" | 50 | 000000000 | 00000 |
1 5/8" | 0.344" | 0.192" | No. 2 | 5/64" | 15 | Partially Threaded | 1.073" | 50 | 000000000 | 0000 |
2" | 0.344" | 0.192" | No. 2 | 5/64" | 15 | Partially Threaded | 1.32" | 50 | 000000000 | 00000 |
2 1/2" | 0.344" | 0.192" | No. 2 | 5/64" | 15 | Partially Threaded | 1.65" | 25 | 000000000 | 00000 |
No. 10 | ||||||||||
2" | 0.344" | 0.189" | No. 2 | 3/32" | 13 | Partially Threaded | 1.32" | 25 | 000000000 | 0000 |
2 1/2" | 0.344" | 0.189" | No. 2 | 3/32" | 13 | Partially Threaded | 1.65" | 25 | 000000000 | 00000 |
3" | 0.344" | 0.189" | No. 2 | 3/32" | 13 | Partially Threaded | 1.98" | 25 | 000000000 | 00000 |
3 1/2" | 0.344" | 0.189" | No. 2 | 3/32" | 13 | Partially Threaded | 2.31" | 25 | 000000000 | 00000 |
No. 12 | ||||||||||
2 1/2" | 0.43" | 0.203" | No. 3 | 7/64" | 11 | Partially Threaded | 1.65" | 25 | 000000000 | 00000 |
3" | 0.43" | 0.203" | No. 3 | 7/64" | 11 | Partially Threaded | 1.98" | 25 | 000000000 | 00000 |
3 1/2" | 0.43" | 0.203" | No. 3 | 7/64" | 11 | Partially Threaded | 2.31" | 10 | 000000000 | 0000 |
4" | 0.43" | 0.203" | No. 3 | 7/64" | 11 | Partially Threaded | 2.64" | 10 | 000000000 | 0000 |
4 1/2" | 0.43" | 0.203" | No. 3 | 7/64" | 11 | Partially Threaded | 2.97" | 10 | 000000000 | 0000 |
5" | 0.43" | 0.203" | No. 3 | 7/64" | 11 | Partially Threaded | 3.3" | 10 | 000000000 | 00000 |
18-8 stainless steel screws have good chemical resistance and are a good choice for ACQ-treated (arsenic-free) lumber. Also known as trim-head deck screws, they have a small flat head and slender shank to reduce the risk of splitting. The Type 17 auger point and narrow body penetrate softwood and plastic-wood composite decking material. They cut threads into drilled holes as they’re turned, so they require less driving torque and cause less stress on material than thread-forming screws. Screws may be mildly magnetic. Length is measured from the top of the head.
For technical drawings and 3-D models, click on a part number.
Head | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Lg. | Dia. | Ht. | Drive Size | Drill Bit Size | Approximate Threads per Inch | Threading | Min. Thread Lg. | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | ||||||||||
No. 7 | ||||||||||
1" | 0.23" | 0.125" | No. 1 | 1/16" | 16 | Partially Threaded | 1/2" | 50 | 000000000 | 000000 |
1 5/8" | 0.23" | 0.125" | No. 1 | 1/16" | 16 | Partially Threaded | 13/16" | 50 | 000000000 | 00000 |
2" | 0.23" | 0.125" | No. 1 | 1/16" | 16 | Partially Threaded | 1" | 50 | 000000000 | 00000 |
2 1/4" | 0.23" | 0.125" | No. 1 | 1/16" | 16 | Partially Threaded | 1 1/8" | 50 | 000000000 | 00000 |
2 1/2" | 0.23" | 0.125" | No. 1 | 1/16" | 16 | Partially Threaded | 1 1/4" | 50 | 000000000 | 00000 |
3" | 0.23" | 0.125" | No. 1 | 1/16" | 16 | Partially Threaded | 1 1/2" | 25 | 000000000 | 0000 |
No. 9 | ||||||||||
3 1/2" | 0.25" | 0.125" | No. 1 | 5/64" | 14 | Partially Threaded | 1 3/4" | 10 | 000000000 | 0000 |
4" | 0.25" | 0.125" | No. 2 | 5/64" | 14 | Partially Threaded | 2" | 10 | 000000000 | 0000 |
More corrosion resistant than 18-8 stainless steel screws, these have excellent resistance to chemicals and salt water and are a good choice for ACQ-treated (arsenic-free) lumber. Also known as trim-head deck screws, they have a small flat head and slender shank to reduce the risk of splitting. The Type 17 auger point and narrow body penetrate softwood and plastic-wood composite decking material. They cut threads into drilled holes as they’re turned, so they require less driving torque and cause less stress on material than thread-forming screws. Screws may be mildly magnetic. Length is measured from the top of the head.
For technical drawings and 3-D models, click on a part number.
Head | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Lg. | Dia. | Ht. | Drive Size | Drill Bit Size | Approximate Threads per Inch | Threading | Min. Thread Lg. | Pkg. Qty. | Pkg. | |
316 Stainless Steel | ||||||||||
No. 7 | ||||||||||
1 5/8" | 0.23" | 0.125" | No. 1 | 1/16" | 16 | Partially Threaded | 13/16" | 50 | 000000000 | 00000 |
2 1/4" | 0.23" | 0.125" | No. 1 | 1/16" | 16 | Partially Threaded | 1 1/8" | 25 | 000000000 | 00000 |
3" | 0.23" | 0.125" | No. 1 | 1/16" | 16 | Partially Threaded | 1 1/2" | 25 | 000000000 | 00000 |
These steel screws have an ultra-corrosion-resistant coating to resist corrosion in wet environments. Also known as trim-head deck screws, they have a small flat head and slender shank to reduce the risk of splitting. The Type 17 auger point and narrow body penetrate softwood and plastic-wood composite decking material. They cut threads into drilled holes as they’re turned, so they require less driving torque and cause less stress on material than thread-forming screws. Length is measured from the top of the head.
For technical drawings and 3-D models, click on a part number.
Head | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Lg. | Dia. | Ht. | Drive Size | Drill Bit Size | Approximate Threads per Inch | Threading | Min. Thread Lg. | Pkg. Qty. | Pkg. | |
Ultra-Corrosion-Resistant Coated Steel | ||||||||||
No. 6 | ||||||||||
2" | 0.27" | 0.08" | No. 1 | 1/16" | 18 | Partially Threaded | 1" | 50 | 000000000 | 000000 |
No. 8 | ||||||||||
2 1/2" | 0.27" | 0.105" | No. 2 | 5/64" | 15 | Partially Threaded | 1 1/4" | 50 | 000000000 | 00000 |
3" | 0.27" | 0.105" | No. 2 | 5/64" | 15 | Partially Threaded | 1 1/2" | 25 | 000000000 | 00000 |
3 1/2" | 0.27" | 0.105" | No. 2 | 5/64" | 15 | Partially Threaded | 1 3/4" | 25 | 000000000 | 00000 |
Thread-forming screws press threads into drilled holes for a tight, vibration-resistant assembly. Also known as trim-head deck screws, they have a small flat head and slender shank to reduce the risk of splitting. The sharp point and narrow body penetrates softwood and plastic-wood composite decking material. Made from steel, they have a black-phosphate finish to resist corrosion in wet environments. Length is measured from the top of the head.
For technical drawings and 3-D models, click on a part number.
Head | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Lg. | Dia. | Ht. | Drive Size | Drill Bit Size | Approximate Threads per Inch | Threading | Min. Thread Lg. | Pkg. Qty. | Pkg. | |
Black-Phosphate Steel | ||||||||||
No. 6 | ||||||||||
1 5/8" | 0.224" | 0.135" | No. 1 | 1/16" | 18 | Partially Threaded | 13/16" | 100 | 000000000 | 00000 |
2 1/4" | 0.224" | 0.135" | No. 1 | 1/16" | 18 | Partially Threaded | 1 1/8" | 100 | 000000000 | 00000 |
No. 8 | ||||||||||
3" | 0.264" | 0.155" | No. 2 | 5/64" | 15 | Partially Threaded | 1 1/2" | 50 | 000000000 | 00000 |
The neoprene-backed washer seals out contaminants. Also known as trim-head deck screws, they have a small flat head and slender shank to reduce the risk of splitting. They have a Type 17 auger point to penetrate softwood and plastic-wood composite decking material. Made from 18-8 stainless steel, they have good chemical resistance and are a good choice for ACQ-treated (arsenic-free) lumber. Screws may be mildly magnetic. Length is measured from the top of the head.
For technical drawings and 3-D models, click on a part number.
Head | Washer | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Lg. | Dia. | Ht. | OD | Thick. | Drive Size | Drill Bit Size | Approximate Threads per Inch | Threading | Min. Thread Lg. | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | ||||||||||||
No. 7 | ||||||||||||
1" | 0.23" | 0.125" | 0.63" | 0.2" | No. 1 | 1/16" | 16 | Partially Threaded | 1/2" | 25 | 000000000 | 000000 |
1 5/8" | 0.23" | 0.125" | 0.63" | 0.2" | No. 1 | 1/16" | 16 | Partially Threaded | 13/16" | 25 | 000000000 | 00000 |
2 1/4" | 0.23" | 0.125" | 0.63" | 0.2" | No. 1 | 1/16" | 16 | Partially Threaded | 2 1/8" | 10 | 000000000 | 00000 |
3" | 0.23" | 0.125" | 0.63" | 0.2" | No. 1 | 1/16" | 16 | Partially Threaded | 1 1/2" | 10 | 000000000 | 00000 |