How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Plastic Push-to-Connect Tube Fittings for Chemicals
- For Use With: Inch: Alcohol, Hydrochloric Acid, Nitric Acid, Sodium Carbonate, Sulfuric Acid
Metric: Acetic Acid, Alcohol, Arsenic Acid, Benzoic Acid, Fluoboric Acid, Sodium Carbonate, Sulfuric Acid - Temperature Range: Inch: 0° to 270° F
Metric: 32° to 175° F - Tubing: Use with hard (Durometer 55D-60D) FEP plastic
Also known as instant fittings, these chemical-resistant plastic fittings connect to tubing with a push. An internal gripping ring holds the tubing tight. To disconnect, push on the release ring and pull the tubing out of the fitting. Use these fittings in low-pressure applications.
PVDF fittings offer excellent chemical resistance, and can be used with hydrochloric acid and nitric acid. They withstand temperatures up to 270° F, higher than other push-to-connect fittings for chemicals. They are produced in a clean room and are bagged individually to prevent dirt and moisture from contaminating the inside. PVDF is also known as Kynar.
For technical drawings and 3-D models, click on a part number.
Through-wall fittings are also known as bulkhead couplings and panel-mount couplings; they mount through your wall or panel to create an inlet or outlet.
| For Tube OD | Material | Color | Release Ring Color | Max. Pressure | For Hole Dia. | For Max. Wall Thick. | Each | |
| 1/4" | PVDF Plastic | Black | Gray | 300 psi @ 72° F | 7/8" | 1/2" | 0000000 | 00000 |
| 5/16" | PVDF Plastic | Black | Gray | 300 psi @ 72° F | 3/16" | 5/8" | 00000000 | 00000 |
| 3/8" | PVDF Plastic | Black | Gray | 300 psi @ 72° F | 1" | 5/8" | 0000000 | 00000 |
| 1/2" | PVDF Plastic | Black | Gray | 300 psi @ 72° F | 1 1/8" | 45/64" | 0000000 | 00000 |
Through-wall fittings are also known as bulkhead couplings and panel-mount couplings; they mount through your wall or panel to create an inlet or outlet.
| For Tube OD (A) | For Tube OD (B) | Material | Color | Release Ring Color | Max. Pressure | For Hole Dia. | For Max. Wall Thick. | Each | |
| 3/8" | 1/4" | PVDF Plastic | Black | Black | 300 psi @ 72° F | 1" | 5/8" | 00000000 | 000000 |
Compression Fittings for Plastic Tubing—Chemicals
- For Use With: PFA Plastic: Hydrochloric Acid, Sulfuric Acid
PTFE Plastic: Alcohol, Ammonia, Benzoic Acid, Bleach, Bromine, Coolant, Fluoboric Acid, Hydrochloric Acid, Hydrofluoric Acid, Nitric Acid, Organic Solvents, Sodium Carbonate, Sulfuric Acid - Temperature Range: PFA Plastic: 0° to 350° F
PTFE Plastic: -40° to 185° F - Tubing: PFA Plastic: Use with hard (Durometer 50D-65D) PFA or PTFE plastic
PTFE Plastic: Use with hard (Durometer 60D) PFA or PTFE plastic
A sleeve (ferrule) compresses the tubing as you tighten the nut, creating a strong seal. The nut and sleeve are included. Fittings are also known as flareless fittings. Fittings that include a gripper sleeve on the tubing create an even tighter seal.
PFA fittings stand up to harsh substances. They’re made through a melting process. PTFE fittings are highly resistant to most acids, alcohols, detergents, and solvents. They’re made by machining. Their nut is made of PVDF, which is resistant to halogens such as chlorine and bromine, strong acids such as hydrofluoric and nitric acids, and organic solvents.
For technical drawings and 3-D models, click on a part number.
Through-wall fittings are also known as bulkhead couplings and panel-mount couplings; they mount through your wall or panel to create an inlet or outlet.
| For Tube OD | Pipe Size | Material | Color | Max. Pressure | For Hole Dia. | For Max. Wall Thick. | Each | |
NPT Threads | ||||||||
|---|---|---|---|---|---|---|---|---|
| 1/4" | 1/4 | PFA Plastic | White | 120 psi @ 72° F | 1/2" | 1/4" | 000000000 | 0000000 |
| 3/8" | 3/8 | PFA Plastic | White | 120 psi @ 72° F | 5/8" | 1/4" | 000000000 | 000000 |
| 1/2" | 1/2 | PFA Plastic | White | 120 psi @ 72° F | 3/4" | 1/4" | 000000000 | 000000 |
| 3/4" | 3/4 | PFA Plastic | White | 120 psi @ 72° F | 1" | 1/2" | 000000000 | 000000 |
Through-wall fittings are also known as bulkhead couplings and panel-mount couplings; they mount through your wall or panel to create an inlet or outlet.
| For Tube OD | Material | Color | Max. Pressure | For Hole Dia. | For Max. Wall Thick. | Each | |
| 1/8" | PFA Plastic | White | 125 psi @ 72° F | 5/16" | 1/4" | 000000000 | 0000000 |
| 1/4" | PFA Plastic | White | 125 psi @ 72° F | 1/2" | 1/4" | 000000000 | 000000 |
| 3/8" | PFA Plastic | White | 125 psi @ 72° F | 5/8" | 1/4" | 000000000 | 000000 |
| 1/2" | PFA Plastic | White | 125 psi @ 72° F | 3/4" | 1/4" | 000000000 | 000000 |
| 3/4" | PFA Plastic | White | 125 psi @ 72° F | 1" | 1/4" | 000000000 | 000000 |
| 4mm | PTFE Plastic | White | 100 psi @ 72° F | 25/64" | 1/4" | 000000000 | 000000 |
| 6mm | PTFE Plastic | White | 100 psi @ 72° F | 29/64" | 1/4" | 000000000 | 000000 |
| 12mm | PTFE Plastic | White | 80 psi @ 72° F | 57/64" | 1/4" | 000000000 | 000000 |
Through-wall fittings are also known as bulkhead couplings and panel-mount couplings; they mount through your wall or panel to create an inlet or outlet.
| For Tube OD | Material | Color | Max. Pressure | For Hole Dia. | For Max. Wall Thick. | Each | |
| 1/4" | PFA Plastic | White | 125 psi @ 72° F | 1/2" | 1/4" | 000000000 | 0000000 |
