A plastic cover fully insulates these splices.

Crimp the barrel twice on each end for an extra-tight grip in high-vibration applications. A plastic cover fully insulates these splices.

When heat is applied, adhesive-lined insulation shrinks and bonds to wires, creating a moisture- and corrosion-resistant seal.

Visually confirm your connection through the inspection window.

These splices are filled with a sealant that creates a barrier to completely keep out moisture when splices are crimped.

These splices can withstand higher temperatures than insulated splices.

When heat is applied, adhesive-lined insulation shrinks and bonds to the wires, creating a watertight seal.

A plastic cover fully insulates these splices and it's clear so you can visually confirm the connection.

With a ring of solder on the inside, these heat-shrink splices create secure, water-resistant connections between wires without the need for a crimping tool.

Insert wires and twist on the threaded end caps. The caps lock wires into place, making these splices a good choice for high-vibration applications.

Join wires in the dirtiest, wet, and harsh environments. These splices meet one of the toughest IP ratings—IP68.

Compress the barrel twice on each end for an extra-tight grip in high-vibration applications.

Connect one wire to two wires of the same size. When heat is applied, adhesive-lined insulation shrinks and bonds to the wires, creating a moisture- and corrosion-resistant seal.