A plastic cover fully insulates these splices.

Crimp the barrel twice on each end for an extra-tight grip in high-vibration applications. A plastic cover fully insulates these splices.

When heat is applied, adhesive-lined insulation shrinks and bonds to wires, creating a moisture- and corrosion-resistant seal.

Visually confirm your connection through the inspection window.

These splices are filled with a sealant that creates a barrier to completely keep out moisture when splices are crimped.

A plastic cover fully insulates these splices.

When heat is applied, adhesive-lined insulation shrinks and bonds to the wires, creating a watertight seal.

Compress the barrel twice on each end for an extra-tight grip in high-vibration applications.

Insert wires and twist on the threaded end caps. The caps lock wires into place, making these splices a good choice for high-vibration applications.

With a ring of solder on the inside, these heat-shrink splices create secure, water-resistant connections between wires without the need for a crimping tool.

A plastic cover fully insulates these splices and it's clear so you can visually confirm the connection.

Join wires in the dirtiest, wet, and harsh environments. These splices meet one of the toughest IP ratings—IP68.

Connect one wire to two wires of the same size. When heat is applied, adhesive-lined insulation shrinks and bonds to the wires, creating a moisture- and corrosion-resistant seal.