Extra-long handles enable access in hard-to-reach areas.

Two curved openings on the jaws grip multiple sizes of round stock, tubing, and pipe.

Prevent damage to your workpiece.

Made of stainless steel, these pliers are good for environments where moisture and other contaminants are present. They resist corrosion that can hinder joint movement, but the jaws will wear more quickly than a steel tool.

Also known as duckbill and flat-nose pliers, the extra-wide tips give you better grip on your work. These stainless steel tools are good for environments where moisture and other contaminants are present. They resist corrosion that can hinder joint movement, but the jaws will wear more quickly than a steel tool.

Made entirely of plastic, these pliers eliminate the potential for an arc flash or short circuit that can occur when using conventional insulated tools with metal components. They are tested to 1,000 volts to meet IEC 60900 and ASTM F1505.

Extra-wide tips give you a better grip on your work. These pliers have insulated grips that protect against accidental contact with live electrical circuits. They are tested to 1,000 volts to meet IEC 60900 and ASTM F1505.

Made of materials that are FM approved, these pliers satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Extra-wide tips give you a better grip on your work, and smooth, consistent movement ensures precision. These tools have a slip-resistant ultra grip that’s shaped to fit comfortably in your hand and reduce strain in repetitive tasks. They are also known as miniature and electronics pliers.

More jaw positions than standard adjustable pliers enable fine adjustment and a firm grip. Push and hold the button to adjust the jaws, and then release the button to lock them in place.

A slim head and long, narrow jaws fit into tight spaces.

Move the curved jaws to 15 positions for fine adjustment. These pliers have a bottom jaw that is shorter than the top for a firm grip on the flats of bolt heads and nuts that have rounded corners.

Colorful plastic grips make these pliers stand out, so they're less likely to be misplaced.

Secure a lanyard to the ring on the handle to prevent dropping your pliers when working at height.

Insulated grips protect against accidental contact with live electrical circuits. These pliers are tested to 1,000 volts to meet IEC 60900 and ASTM F1505.

Colorful plastic grips make these assorted pliers stand out, so they’re less likely to be misplaced.

Insulated grips protect against accidental contact with live electrical circuits. These assorted pliers are tested to 1,000 volts to meet IEC 60900 and ASTM F1505.

More jaw positions than standard adjustable pliers enable fine adjustment and a firm grip. Push and hold the button to adjust the jaws, and then release the button to lock them in place.

Choose these tools when you need the gripping power of a pipe wrench with the adjustability of pliers. Slide the pivot point of the jaws to a range of positions.

Lock the jaws in a vise-like grip around a workpiece and these assorted pliers stay clamped in place to leave your hands free.

Prevent damage to your workpieces with pliers that have nonmarring jaws. Adjust the pivot point to switch between two different jaw opening sizes.

Colorful plastic grips make these pliers stand out, so they're less likely to be misplaced.

These stainless steel pliers are good for environments where moisture and other contaminants are present. They resist corrosion that can hinder joint movement, but the jaws will wear more quickly than a steel tool.

Made of aluminum-bronze that is FM approved, these pliers satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Hold larger workpieces than standard locking pliers. These tools lock in a vise-like grip around a workpiece and stay clamped in place.

Squeeze the handles and the jaws automatically adjust to fit a workpiece and lock in place.

When there isn't clearance to use standard-grip locking pliers, the angled handle on these tools gives you access. Lock the jaws around a workpiece and these pliers stay clamped in place.

Secure these holders to a table or benchtop and slide in up to three pairs of locking pliers to create a hands-free way to hold your work.

Reach around closely spaced components and other obstructions. These pliers lock in a vise-like grip around a workpiece and stay clamped in place to leave your hands free.

Attach your locking pliers to a slide hammer to pull stubborn objects.

When there isn't clearance to use standard-grip pliers, the angled head on these tools gives you access. Also known as lineman’s and combination pliers, use them to pull, bend, and cut wire.

Additional features, such as wire terminal crimpers, enable you to perform a variety of electrical wiring and installation work with a single tool. Also known as lineman’s pliers, use them to pull, bend, and cut wire.

Insulated grips protect against accidental contact with live electrical circuits. These pliers are tested to 1,000 volts to meet IEC 60900 and ASTM F1505. Use them to pull, bend, and cut wire.

Choose a stainless steel tool for environments where moisture and other contaminants are present. These pliers resist corrosion that can hinder joint movement, but the jaws will wear more quickly than a steel tool. Use them to pull, bend, and cut wire.

Secure a lanyard to the ring on the handle to prevent dropping your pliers when working at height. Use these tools to pull, bend, and cut wire.

Extra-long handles enable access to hard-to-reach areas. These pliers are shaped to reach around closely spaced components and other obstructions.

Choose a stainless steel tool for environments where moisture and other contaminants are present. These pliers resist corrosion that can hinder joint movement, but the jaws will wear more quickly than a steel tool. They are shaped to reach around closely spaced components and other obstructions

Squeeze the handles to open the jaws; release to snap them closed. Once closed, they stay clamped in place to leave your hands free. These pliers reach around closely spaced components and other obstructions.

The smallest bent-nose pliers we offer allow you to work in the smallest spaces, including under a microscope. They are shaped to reach around closely spaced components and other obstructions.

Move the curved jaws to 25 positions for fine adjustment and a firm grip on round objects, such as oil filters, connectors, and PVC pipe. Push and hold the button to adjust the jaws, and then release the button to lock them in place. They're also known as cannon plug pliers.

Insulated grips protect against accidental contact with live electrical circuits. These pliers are tested to 1,000 volts to meet IEC 60900. Designed for looping and bending wire, they are also known as round-nose pliers.

Made of beryllium copper that is FM approved, these pliers satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. Also known as round-nose pliers, use for looping and bending wire.

The smallest round-nose pliers we offer allow you to bend and loop wire in the smallest spaces, including under a microscope.

Clamp down on nonreinforced hose and tube to squeeze it shut, eliminating the need to drain the hose when working on pumps, heating and cooling systems, and fuel lines. Squeeze the handles to lock the jaws and these pliers stay in place.

Keep hands away from machinery—use these lightweight tools to pick up and hold parts. The pliers-style handles provide more comfort and control than standard tongs.

Slide the upper jaw to adjust the opening size. These clamps hold larger workpieces than other locking plier clamps of similar size.

Angled jaws clamp sheets, bars, and U-channels at 90°.

Mount to the top of your workbench.

The long, pivoting jaws let you clamp farther into your workpiece and in tight spots.

Squeeze the handles to open the clamp; release and the spring holds it tightly in place.

The long, narrow jaws clamp farther into a workpiece and in tight spots.

Attached to an arm you can flex into position, these clamps hold objects such as a flashlight, tool, or instructions.

Clamp thin sheet material together without drilling holes. These clamps open with special pliers and spring closed when the pliers are released.

Insert these clamps into drilled holes in sheet material to grip and align when riveting or welding.

For repetitive clamping, turn the holding screw to adjust the opening size one time, and then use the handle to secure and release workpieces.

The grips are a fluorescent color to stand out.

These sets include four cutters, each with a different head shape.

These tools divert static electricity faster than our other static-control wire cutters.

These cutters are stainless steel, which provides excellent corrosion resistance.

A double hinge provides high cutting force with low gripping pressure.

Cut hard steel wire, nails, and small rivets close to the surface with the wide, flat jaws on these cutters.

Also known as nippers, these cutters have wide, flat jaws that cut steel wire and bolts close to the surface.

These powerful cutters make diagonal cuts with a nipping action to cut extra-hard wire with ease.

The small size and spring-loaded jaw lets you make quick cuts with one hand.

A small grip enables one-handed cutting.