Designed for use in 1/2" dia. through holes.

Use these latches with three-point locking systems, such as those on filing cabinet doors.

Also known as compression cam latches, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a secure hold.

These latches are IP65 rated for protection against dust, dirt, and low-pressure washdowns.

Also known as compression cam latches, turn the handle a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.

These latches have a spring-wire cam that slips under a receiving catch on a cabinet body to create tension and hold cabinet doors and drawers closed.

These latches are IP65 rated for protection against dust, dirt, and low-pressure washdowns.

Press the button and the handle snaps open; push the handle shut for a secure hold.

Also known as compression cam latches, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a secure hold.

With a flat inset grip, the handle is recessed to stay out of the way.

These latches have a spring-wire cam that slips under a receiving catch on a cabinet body to create tension and hold cabinet doors and drawers closed.

Raise the handle and it swings smoothly for easy latching and unlatching.

Designed for use in 1/4" or 1/2" dia. through holes.

Also known as compression cam locks, turn the head a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.

These locks have a spring-wire cam that slips under a receiving catch on a cabinet body to create tension and hold cabinet doors and drawers closed.

Designed for use in 1/2" dia. through holes.

Made of plastic, these locks are suitable for damp and humid environments.

Use these locks in a 3/4" dia. through hole, which is the most common through-hole size.

These locks are IP65 and NEMA 4 rated for protection against dust, dirt, and washdowns.

Made of plastic, these locks are suitable for damp and humid environments.

Also known as compression cam locks, turn the handle a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.

Designed for use in 1/2" dia. through holes.

To prevent internal damage, these locks have a stainless steel shutter that blocks rain, snow, and dirt from entering the cylinder.

Offering more security than standard master keyed cam locks, these have circular keys that are difficult to duplicate.

These sets come with four cam locks that are divided into two groups of two. Each group of cam locks opens with a specific key number. All open with the same master key.

Designed for food-processing and hygienic applications, these corrosion-resistant cam locks are made of FDA listed materials.

Also known as compression cam locks, turn the head a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.

Also known as compression cam locks, turn the head a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.

Open multiple locks with the same key.

The mounting screws on these locks are concealed to prevent tampering.

The mounting screws on these locks are concealed to prevent tampering.

Choose these locks if you need to open several with the same key.

These locks are IP65 rated for protection against dust, dirt, and washdowns.

The mounting screws on these locks are concealed to prevent tampering.

The mounting screws on these locks are concealed to prevent tampering.

With a molded inset grip, the handle remains recessed to stay out of the way.

These tight-hold locks are IP65 and NEMA 4 rated for protection against dust, dirt, and washdowns. Press the button and the handle snaps open; push the handle shut for a secure hold.

With an extra long shaft, these latches are good for use with thick, heavy doors, such as those found on trucks and large cabinets.

Secure these latches with a padlock.

Set a combination and reset it at any time.

Their spring-loaded design withstands vibration, rattling, and shaking better than other push-to-close grab latches for a more secure hold.

Turn the screw on the latch to adjust the gripping force on the strike plate.

Also known as bullet catches, these latches have a spring-loaded ball that grabs and holds the strike plate to keep doors shut.

Close and open these grab latches with a push—there's no need for a handle.

To keep your environments free of contaminants, the magnet is encapsulated so it won't release particles when it meets the strike plate.

These latches withstand temperatures up to 480° or 570° F.

There's no need for a mating strike plate for these latches—their spring-loaded arm snaps to engage when closing the door.

To prevent doors from slamming, these latches are hydraulic.

Their spring-loaded design withstands vibration, rattling, and shaking better than other face-mount push-to-close latches for a more secure hold.

For use on spray booths and drying ovens, these latches automatically open when the internal pressure of the enclosure reaches a set level.

Attach these locks vertically to the side edge of doors on refrigerators and industrial enclosures with the strike plate mounted behind them on the frame.

Mount these locks horizontally to the face of doors on refrigerators and industrial enclosures with the strike plate mounted on the frame.

Mount these padlockable latches horizontally to the face of doors on refrigerators, ovens, and industrial enclosures with the strike plate mounted on the frame.

An emergency release handle offers a means of escape if a door closes with someone inside an enclosure.

These latches use downward compression to pull surfaces together for sealing gasketed doors.

These latches reach around outside corners to draw two surfaces together—use them to secure cases, toolboxes, and other containers.

Designed with compression springs to withstand vibration better than standard draw latches, these offer a more secure hold.

Mount these latches on a corner to draw perpendicular surfaces together.

An integrated slide bolt extends into the strike plate to resist pull and vibration from side-to-side, front-to-back, and up-and-down forces.

These latches have a safety catch to prevent accidental opening.

The latch arm is coated with vinyl so it won't scratch surfaces.

Each latch comes with a variety of strike plates for different mounting options.

These latches hook into a lip or notch and have an adjustable latching distance to compensate for gasketing and misalignment.