One-piece gears provide more durability than the riveted gears of other hand winches. These winches move loads more gradually than standard hand winches. They take longer to wind but require less effort.

Turn the crank to move material horizontally. These winches wind faster than precise-positioning winches.

Rope does not accumulate on this winch, so it's good for longer lengths of rope than a standard winch can hold. Attach one end of your rope to the load, wind a few wraps on the winch, then pull the free end of the rope as the winch turns. Also known as a capstan winch.

Use the handheld control to move loads horizontally.

These winches operate longer than standard electric winches.

Tackle frequent lifting jobs with these rugged winches—their one-piece machined gears stand up to daily use.

Tackle frequent lifting jobs with these rugged winches—their one-piece machined gears stand up to daily use.

These winches are designed for occasional use.

These winches operate longer and require shorter breaks than standard air-powered winches.

Hang these pulleys from hooks, screws, and bolts.

Also known as snatch blocks, these open so it’s easier to feed the rope through the housing—a free rope end is not needed.

Also known as snatch blocks, these open so it’s easier to feed the rope through the housing—a free rope end is not needed.

Mount these pulleys to a flat surface to assist with horizontal pulling or to guide a rope.

Also known as snatch blocks, these open so it’s easier to feed the rope through the housing—a free rope end is not needed.

Hang these pulleys from hooks, screws, and bolts to assist with horizontal pulling or to guide a rope.

Also known as sheaves, use these pulleys to assist with horizontal pulling or to guide a rope.

These hoists have an aluminum body, stainless steel chain, and bronze hooks for spark resistance.

Hoists have a cool-running motor for continuous operation.

These hoists are small and lightweight so you can easily move them between jobs.

These hoists have a disc friction brake as well as a mechanical brake for added protection to stop the load and hold it in place when you're not lifting.

Stainless steel chain and hooks reduce corrosion and prevent contamination.

Smaller and lighter than other precise-positioning hoists, these can be used in tighter spaces and easily moved between jobs. Use the handheld control to adjust lifting speed. Low speeds allow precise positioning; high speeds are for quick lifting.

Change or hold the speed at any time during operation, so you can start the hoist softly and gradually decelerate.

Use the handheld controls to effortlessly move these hoists with built-in trolley along your beam, as well as to lift your load.

These hoists have a thick, rugged frame for long life.

These hoists have a zinc-flake coated steel body, stainless steel chain, and copper-coated steel hooks for spark resistance.

These hoists are small enough to fit in your toolbox and can be used in tight spaces. They have a thick, rugged frame for long life, as well as enclosed gears to protect from debris and contamination for smooth operation.

Use the ratcheting lever to lift and position your load, and the brake will securely hold it in place.

These hoists have large gears to lift faster with each pull than standard trolley-mount hand chain hoists. Good for frequent lifting operations where user fatigue is a concern.

The body spins 360° so you can operate these hoists from any direction.

Lift your tool until the cable retracts into the housing.

Attach to your belt or belt loop.

Drill through the stem to mount.

Cable tension is controlled by an air regulator for precise, constant tool positioning.

The outlets have covers to keep out water and dust when not in use.

Use these cord reels where ignitable gas and dust may be present. They're rated NEMA 4 and UL listed for Class I, Divisions 1 and 2, Groups C and D; and Class II, Divisions 1 and 2, Groups F and G hazardous environments.

Controlled winding prevents the cord from whipping at the end, making winding safer and extending the life of the cord and reel.

A ratchet holds the extension cord on these reels in place at any length; a quick pull releases the cord and the spring-driven winding mechanism retracts it.

Intended for demanding applications, these reels include an oil- and water-resistant extension cord.

Attach the wires in a power cord to these reels for a permanent connection.

Control the amount of cord that retracts into a reel.

No assembly required—these spools are all one piece. Use them to store twine, wire, rope, and chain.

Wind your garden hose around these reels to keep it neat and organized.

Use these reels in applications where the hose is pulled straight out of the reel. They have good to very good corrosion resistance.

These reels have more support than medium duty reels, so you can pull the hose out at an angle.

Reels have a frame-style construction that provides extra strength to handle large-diameter hose. They have very good corrosion resistance.

Not only do these reels have very good corrosion resistance, they also have more support than medium duty reels, so you can pull the hose out at an angle.

Measure V-belt cross sections and pulley groove depths to select the correct size belt.

Reels are enclosed to protect your hose when it's not in use.

Designed for areas where space is limited, these reels have the smallest overall size of all our reels.

Protect your hose when it’s not in use.

Protect your hose when it’s not in use.

Protect your hose when it's not in use.

Combine a counter, feeder reel, coiler reel, and stand to create a wire, cable, and cord length measurer.