Material Material |
---|
|
Finish Finish |
---|
|
For Maximum Panel Thickness For MaximumPanel Thickness |
---|
|
For Minimum Panel Thickness For MinimumPanel Thickness |
---|
|
Retainer Material Retainer Material |
---|
|
Clip-On Nut Profile Clip-On Nut Profile |
---|
![]() | With Hex Nut |
![]() | With Floating Hex Nut |
![]() | With Enclosed Hex Nut |
More
Snap these nuts into square holes in thin material. Threads float inside the retainer so you can install a bolt at a slight angle to align off-center parts. Mounting legs expand to lock the fastener in place. Install them by hand or with pliers.
Black-phosphate steel nuts are mildly corrosion resistant in dry environments.
Zinc-plated steel nuts resist corrosion in wet environments.
For technical drawings and 3-D models, click on a part number.
Thread Size | For Panel Thick. | Square Hole Size | Wd. | Head Ht. | Pkg. Qty. | Pkg. | |
Black-Phosphate Steel | |||||||
---|---|---|---|---|---|---|---|
10-24 | 0.025" to 0.063" | 0.375" to 0.38" | 0.52" | 0.25" | 25 | 000000000 | 000000 |
1/4"-20 | 0.025" to 0.063" | 0.375" to 0.38" | 0.52" | 0.25" | 25 | 000000000 | 0000 |
1/4"-20 | 0.064" to 0.105" | 0.375" to 0.38" | 0.52" | 0.25" | 25 | 000000000 | 0000 |
1/4"-20 | 0.093" to 0.126" | 0.375" to 0.38" | 0.52" | 0.25" | 25 | 000000000 | 0000 |
5/16"-18 | 0.093" to 0.126" | 0.503" to 0.508" | 0.66" | 0.3" | 10 | 000000000 | 0000 |
Zinc-Plated Steel | |||||||
6-32 | 0.025" to 0.063" | 0.375" to 0.38" | 0.52" | 0.25" | 25 | 000000000 | 00000 |
8-32 | 0.025" to 0.063" | 0.375" to 0.38" | 0.52" | 0.25" | 25 | 000000000 | 00000 |
8-32 | 0.064" to 0.105" | 0.375" to 0.38" | 0.52" | 0.25" | 25 | 000000000 | 00000 |
8-32 | 0.093" to 0.126" | 0.375" to 0.38" | 0.52" | 0.25" | 10 | 000000000 | 0000 |
10-24 | 0.025" to 0.063" | 0.375" to 0.38" | 0.52" | 0.25" | 25 | 000000000 | 00000 |
10-24 | 0.064" to 0.105" | 0.375" to 0.38" | 0.52" | 0.25" | 25 | 000000000 | 00000 |
10-32 | 0.025" to 0.063" | 0.375" to 0.38" | 0.52" | 0.25" | 25 | 000000000 | 00000 |
10-32 | 0.064" to 0.105" | 0.375" to 0.38" | 0.52" | 0.25" | 25 | 000000000 | 00000 |
10-32 | 0.093" to 0.126" | 0.375" to 0.38" | 0.52" | 0.25" | 25 | 000000000 | 00000 |
1/4"-20 | 0.025" to 0.063" | 0.375" to 0.38" | 0.52" | 0.25" | 25 | 000000000 | 00000 |
1/4"-20 | 0.064" to 0.105" | 0.375" to 0.38" | 0.52" | 0.25" | 25 | 000000000 | 0000 |
1/4"-20 | 0.093" to 0.126" | 0.375" to 0.38" | 0.52" | 0.25" | 25 | 000000000 | 00000 |
1/4"-20 | 0.125" to 0.156" | 0.375" to 0.38" | 0.52" | 0.25" | 25 | 000000000 | 00000 |
5/16"-18 | 0.028" to 0.056" | 0.503" to 0.508" | 0.66" | 0.3" | 10 | 000000000 | 0000 |
5/16"-18 | 0.057" to 0.092" | 0.503" to 0.508" | 0.66" | 0.3" | 10 | 000000000 | 0000 |
5/16"-18 | 0.093" to 0.126" | 0.503" to 0.508" | 0.66" | 0.3" | 10 | 000000000 | 0000 |
5/16"-18 | 0.127" to 0.162" | 0.503" to 0.508" | 0.66" | 0.3" | 10 | 000000000 | 00000 |
3/8"-16 | 0.028" to 0.056" | 0.503" to 0.508" | 0.66" | 0.3" | 10 | 000000000 | 0000 |
3/8"-16 | 0.093" to 0.126" | 0.503" to 0.508" | 0.66" | 0.3" | 10 | 000000000 | 0000 |
3/8"-16 | 0.162" to 0.21" | 0.573" to 0.578" | 0.87" | 0.41" | 1 | 000000000 | 0000 |
3/8"-16 | 0.24" to 0.26" | 0.588" to 0.593" | 0.87" | 0.41" | 1 | 000000000 | 0000 |
1/2"-13 | 0.093" to 0.126" | 0.588" to 0.593" | 0.87" | 0.41" | 5 | 000000000 | 0000 |
Metric Zinc-Plated Steel | |||||||
M6 | 0.635mm to 1.6mm | 0.375" to 0.38" | 0.52" | 0.25" | 25 | 000000000 | 00000 |
M6 | 1.626mm to 2.667mm | 0.375" to 0.38" | 0.52" | 0.25" | 25 | 000000000 | 00000 |
These nuts have good chemical resistance and may be mildly magnetic. Snap them into square holes in thin material. Threads float inside the retainer so you can install a bolt at a slight angle to align with off-center parts. Mounting legs expand to lock the fastener in place. They can be installed by hand or with pliers.
For technical drawings and 3-D models, click on a part number.
Thread Size | Thread Pitch | For Panel Thick. | Square Hole Size | Wd. | Head Ht. | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | ||||||||
---|---|---|---|---|---|---|---|---|
10-24 | __ | 0.025" to 0.063" | 0.375" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 00000 |
10-24 | __ | 0.064" to 0.105" | 0.375" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 0000 |
10-24 | __ | 0.093" to 0.126" | 0.343" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 00000 |
10-24 | __ | 0.125" to 0.156" | 0.375" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 00000 |
10-32 | __ | 0.025" to 0.063" | 0.375" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 0000 |
10-32 | __ | 0.064" to 0.105" | 0.375" to 0.38" | 0.49" | 0.25" | 5 | 000000000 | 0000 |
10-32 | __ | 0.093" to 0.126" | 0.343" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 00000 |
10-32 | __ | 0.125" to 0.156" | 0.375" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 00000 |
1/4"-20 | __ | 0.025" to 0.063" | 0.375" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 0000 |
1/4"-20 | __ | 0.064" to 0.105" | 0.375" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 0000 |
1/4"-20 | __ | 0.093" to 0.126" | 0.375" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 0000 |
1/4"-20 | __ | 0.125" to 0.156" | 0.343" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 0000 |
Metric 18-8 Stainless Steel | ||||||||
M5 | 0.8mm | 0.635mm to 1.6mm | 0.343" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 0000 |
M5 | 0.8mm | 1.626mm to 2.667mm | 0.343" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 0000 |
M5 | 0.8mm | 2.362mm to 3.2mm | 0.343" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 0000 |
M5 | 0.8mm | 3.175mm to 3.962mm | 0.375" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 0000 |
M6 | 1mm | 0.635mm to 1.6mm | 0.343" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 0000 |
M6 | 1mm | 1.626mm to 2.667mm | 0.375" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 0000 |
M6 | 1mm | 2.362mm to 3.2mm | 0.343" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 0000 |
M6 | 1mm | 3.175mm to 3.962mm | 0.375" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 0000 |
Threads float inside the retainer so you can install a bolt at a slight angle to align with off-center parts. Weld these nuts to materials for a strong permanent hold or punch holes in the flanges and secure them with rivets.
Weld zinc-plated steel nuts with aluminum retainer to aluminum parts.
Weld steel nuts with steel retainer to steel parts.
For technical drawings and 3-D models, click on a part number.
Base | |||||||
---|---|---|---|---|---|---|---|
Thread Size | Lg. | Wd. | Thick. | Ht. | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel Nut with 5052 Aluminum Retainer | |||||||
10-32 | 1 1/2" | 1/2" | 3/64" | 11/32" | 10 | 000000000 | 000000 |
1/4"-20 | 1 3/4" | 9/16" | 1/16" | 7/16" | 10 | 000000000 | 00000 |
5/16"-18 | 2" | 25/32" | 1/16" | 33/64" | 10 | 000000000 | 00000 |
3/8"-16 | 2" | 25/32" | 1/16" | 33/64" | 5 | 000000000 | 0000 |
Steel Nut with C1008/C1010 Steel Retainer | |||||||
8-32 | 1 1/2" | 1/2" | 3/64" | 11/32" | 10 | 000000000 | 00000 |
10-24 | 1 1/2" | 1/2" | 3/64" | 11/32" | 10 | 000000000 | 0000 |
10-32 | 1 1/2" | 1/2" | 3/64" | 11/32" | 10 | 000000000 | 0000 |
1/4"-20 | 1 3/4" | 9/16" | 1/16" | 7/16" | 10 | 000000000 | 00000 |
1/4"-28 | 1 3/4" | 9/16" | 1/16" | 7/16" | 10 | 000000000 | 00000 |
5/16"-18 | 2" | 25/32" | 1/16" | 33/64" | 10 | 000000000 | 00000 |
5/16"-24 | 2" | 25/32" | 1/16" | 33/64" | 10 | 000000000 | 00000 |
3/8"-16 | 2" | 25/32" | 1/16" | 33/64" | 10 | 000000000 | 00000 |
3/8"-24 | 2" | 25/32" | 1/16" | 33/64" | 5 | 000000000 | 00000 |
1/2"-13 | 2 1/4" | 15/16" | 1/16" | 51/64" | 5 | 000000000 | 00000 |
Threads float inside the retainer so you can install a bolt at a slight angle to align with off-center parts. Weld these nuts to uncoated steel for a strong permanent hold or punch holes in the flanges and secure them with rivets. The retainer is made from C1008-C1010 steel.
For technical drawings and 3-D models, click on a part number.
Also known as cage clip-on nuts, these have a S-style design that provides more strength than other no-slip clip-on nuts. They firmly clip onto the edge of panels and stay secure. All have a finish that resists corrosion in wet environments.
For technical drawings and 3-D models, click on a part number.
Thread Size | For Panel Thick. | Distance from Ctr. of Hole to Edge (A) | Pkg. Qty. | Pkg. | |
Cadmium-Plated Steel | |||||
---|---|---|---|---|---|
6-32 | 0.045" to 0.08" | 0.255" | 1 | 000000000 | 00000 |
8-32 | 0.02" to 0.12" | 0.25" | 1 | 000000000 | 0000 |
8-32 | 0.02" to 0.12" | 0.281" | 1 | 000000000 | 0000 |
8-32 | 0.02" to 0.12" | 0.375" | 1 | 000000000 | 0000 |
8-32 | 0.02" to 0.12" | 0.5" | 1 | 000000000 | 0000 |
10-32 | 0.02" to 0.09" | 0.5" | 1 | 000000000 | 0000 |
10-32 | 0.02" to 0.12" | 0.281" | 1 | 000000000 | 0000 |
10-32 | 0.081" to 0.148" | 0.35" | 1 | 000000000 | 0000 |
Zinc-Plated Steel | |||||
10-32 | 0.02" to 0.12" | 0.281" | 1 | 000000000 | 0000 |
10-32 | 0.09" to 0.125" | 0.281" | 1 | 000000000 | 0000 |
A hex-shaped barrel allows these clip-on nuts to be gripped with a wrench to hold them in place when tightening a machine screw. They firmly clip onto the edge of panels and have multiple threads for secure thread engagement. They're also known as U-Style clip-on nuts.
Zinc-plated steel clip-on nuts are corrosion resistant in wet environments.
Black-phosphate steel clip-on nuts are mildly corrosion resistant in dry environments.
For technical drawings and 3-D models, click on a part number.
A hex-shaped barrel allows these nuts to be gripped with a wrench to hold them in place when tightening a screw. All have multiple threads for secure thread engagement. They're also known as J-style clip-on nuts. Made from black-phosphate steel, they're mildly corrosion resistant in dry environments.
For technical drawings and 3-D models, click on a part number.
Slide these nuts on the edge of a panel and position them by hand. Also known as G-style clip-on nuts, they have threads that float inside the retainer so you can install a bolt at a slight angle to align off-center parts. A zinc plating provides corrosion resistance in wet environments.
For technical drawings and 3-D models, click on a part number.
Thread Size | For Panel Thick. | Distance from Ctr. of Hole to Edge (A) | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | |||||
---|---|---|---|---|---|
10-32 | 0.069" to 0.079" | 0.285" | 10 | 000000000 | 00000 |
Slide these nuts on the edge of a panel and position them by hand. Also known as G-style clip-on nuts, they have threads that float inside the retainer so you can install a bolt at a slight angle to align off-center parts. A zinc plating provides corrosion resistance in wet environments.
For technical drawings and 3-D models, click on a part number.
Thread | ||||||
---|---|---|---|---|---|---|
Size | Pitch, mm | For Panel Thick., mm | Distance from Ctr. of Hole to Edge (A), mm | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | ||||||
M5 | 0.8 | 1.75 to 2 | 7.23 | 10 | 000000000 | 00000 |